Bedienungsanleitung Sony CDP-CE505 (Seite 13 von 78) (Englisch, Französisch, Spanisch, Schwedisch)

50443

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Recording From CDs

Recording from CDs

Recording Your Own Programme

You can record the programme you’ve created on a

tape, etc. The programme can contain up to 32 tracks.

By inserting a pause during programming, you can

divide the programme into two for recording on both

sides of a tape.

1 Create your programme (for side A when

recording on a tape) while checking the total

playing time indicated in the display.

Follow Steps 1 to 4 in “Creating Your Own

Programme” on page 11.

The

indication appears in the display.

2 When you record on both sides of the tape, press

P to insert a pause.

The “P” and

A B

indications appear in the display

and the playing time is reset to “0.00.”

When you record on one side of the tape, skip this

step and go to Step 4.

A pause is counted as one track

You can programme up to 31 tracks when you insert a

pause.

3 Repeat Steps 2 to 4 in “Creating Your Own

Programme” on page 11 to create the programme

for side B.

4 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the player

pauses at the end of the programme for side A.

5 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

You can check the total playing time while

programming (Programme Edit)

To select a track, press ≠ or ± and check the total

playing time. Then press PROGRAM to confirm your

selection.

To check and change your programme

See page 12.

The

indication appears while checking the

programme for side A and

while checking the

programme for side B.

>10Number buttons

PROGRAM DISC 1 – 5

P·

1 Press DISC SKIP to select the disc.

2 Press EDIT/TIME FADE repeatedly before you

start playing until “EDIT” appears and “A” in the

indication flashes in the display.

3 Press ≠ or ± to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00) (30.00) (37.00) (45.00)

4 Press EDIT/TIME FADE to have the player create

the programme.

The display shows the tracks to be recorded. “B” in

the

indication flashes in the display.

5 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

programme for side B. The display shows the

programmed tracks.

When you record on one side of the tape, skip this

step.

6 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the programme for side

EDIT/TIME FADE

≠/±

DISC SKIP·

Recording a CD by Specifying

Tape Length (Time Edit)

You can have the player create a programme that will

fit the length of the tape.

The player automatically creates a programme,

keeping the original order of the disc.

The programme can contain up to 32 tracks (a pause

inserted between tracks is counted as one track).

Note that tracks numbered over 20 cannot be

programmed automatically.

(Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-CE505 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-CE505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info