Bedienungsanleitung Sony CDP-XA555ES (Seite 17 von 76) (Englisch, Französisch, Spanisch)

50558

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Recording From CDs

1 Press EDIT/TIME FADE before you start playing

as follows:

• To select Time Edit, press the button once.

“EDIT” appears and “SIDE-A” flashes in the

display.

• To select Just Edit, press the button twice.

“

JUST

EDIT

( )

” appears and “SIDE-A” flashes in the

display.

Recording a CD by Specifying

the Tape Length (Time Edit/Just

Edit)

You can have the player create a programme that will

fit the length of the tape. Select one of the following

options:

• Time Edit: automatically creates a programme,

keeping the original order of the disc.

• Just Edit: automatically arranges the track order to fit

the tape length.

The programme can contain up to 24 tracks (a pause

inserted between tracks is counted as one track).

Note that tracks with numbers over 24 cannot be

programmed.

(EDIT/TIME FADE

≠ AMS ±

0/)

PLAY MODE

3 Press EDIT/TIME FADE to have the player create

the programme.

The display shows the tracks to be recorded.

“SIDE-B” flashes in the display.

4 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

programme for side B. The display shows the

programmed tracks.

When you record on one side of the tape or on a

DAT or MD, skip this step.

5 Start recording on the deck and then press ( on

the player.

When you record on both sides of the tape, the

player pauses at the end of the programme for side

6 To continue recording on side B, reverse the tape

and press ( or P on the player to resume

playing.

To cancel Time Edit/Just Edit

Press PLAY MODE repeatedly until “SHUFFLE,”

“PROGRAM,” and “CUSTOM INDEX” disappear from the

display (or press CONTINUE on the remote).

You can programme the tracks you want in advance

Select the tracks before doing the above procedure. The

player creates a programme from the remaining tracks.

In this case, you cannot select “HALF” to specify the tape

length.

You can freely specify the tape length

Set the tape length using ≠ AMS ±.

Example: When the tape length of one side is 30 minutes

and 15 seconds

1 To set the minutes, turn ≠ AMS ±

until “30” appears in the display, then push

≠ AMS ±.

2 To set the seconds, turn ≠ AMS ±

until “15” appears in the display, then push

≠ AMS ±.

When tracks which are not numerically consecutive

on the disc are programmed consecutively (i.e. 1, 3,

5 etc.)

A one-second access time blank is added between the

tracks.

You can automatically insert a blank space of 3

seconds between each track

Use the Auto Space function (see page 19).

You can check and change the programme

See page 14.

12345

678910

JUST

EDIT

SIDE–A

MIN SEC

2 Press 0 or ) to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

n HALF ˜ C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00) (30.00) (37.00) (45.00)

When you select “HALF”

The player sets the programme of each side to a half of

the total playing time of the disc. Note that you cannot

select “HALF” when the disc has more than 24 tracks.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XA555ES Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-XA555ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info