Bedienungsanleitung Sony CDP-XB630 (Seite 11 von 64) (Englisch, Französisch, Spanisch)

50561

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Playing CDs

When you directly locate a track numbered over 10

Press >10 first, then the corresponding number buttons.

To enter “0,” use button 10.

Example: To play track number 30

Press >10 first, then 3 and 10.

You can extend the playing time during Music Scan

Press MUSIC SCAN repeatedly until the playing time

you want (10, 20 or 30) appears in the display. Each time

you press the button, the playing time changes cyclically.

Note

If “– OVER –” appears in the display, the disc has reached the

end while you were pressing ). Press 0 or turn

≠ AMS ± counterclockwise to go back.

To locate

The next or

succeeding tracks

The current or

preceding tracks

A specific track

directly

By scanning each

track for 10 seconds

(Music Scan)

A point while

monitoring the sound

A point quickly by

observing the display

during pause

You need to

Turn ≠ AMS ± clockwise until

you find the track. When using the

remote, press + repeatedly until

you find the track.

Turn ≠ AMS ± counterclockwise

until you find the track. When using

the remote, press = repeatedly until

you find the track.

Turn ≠ AMS ± until you find the

track number you want. When using

the remote, press the number button of

the track.

Press MUSIC SCAN. When you find

the track you want, press · to start

playing the track.

Press ) (forward) or 0 (backward)

and hold down until you find the

point.

Press ) (forward) or 0 (backward)

and hold down until you find the

point. You will not hear the sound

during the operation.

Customising the Sound of Your

Music (Digital Filter Function)

(Only for CDP-XB930 and CDP-

XB930E)

By selecting the type of filter you want, you can adjust

the sound to match your system, your speakers, etc.

This player has four types of filters: “STD (Standard),”

“1,” “2” and “3.”

FILTER

Sound image

• wide ranging

• ample spatial representation

• clear

• smooth sound reproduction

• high clarity

• strength

• warm

• deep

Set the FILTER control to the digital filter type you

want. The display shows the digital filter type you

select.

If you change the type of digital filter during play, the

sound will be interrupted momentarily.

Notes

• The Digital Filter function primarily changes characteristics

outside the audible frequency. They cannot affect changes

within the audible frequency such as those provided by the

tone controls of the amplifier. Therefore, with certain

combinations of hardware and software, there may be no

noticeable effect after switching the filter.

• If you change the type of digital filter during Peak Search

(See page 18), the type of filter appears in the display when

Peak Search is finished.

Types of Digital Filter

STD (Standard)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XB630 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-XB630

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info