Bedienungsanleitung Sony CDP-XE570 (Seite 12 von 36) (Englisch, Französisch)

50636

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Programming the CD

tracks

You can arrange the order of the tracks on a

disc and create your own programme. The

programme can contain up to 24 tracks.

1 Press PLAY MODE repeatedly until

“PROGRAM” appears in the display

before you start playing.

2 Turn lAMSL until the track you

want appears and push lAMSL to

select the track.

The track number that you programmed, the

playing order, and the total playing time

appear in the display.

If you’ve made a mistake

Press CLEAR, then repeat Step 2.

Tip (CDP-XE570/XE370 only)

You can select the track using the number buttons

on the remote. To select a track with a number

over 10, use >10 (see page 9).

3 Repeat Step 2 to programme the tracks

in the order you want.

4 Press H to start Programme Play.

To cancel Programme Play

Press PLAY MODE.

Tips

• The programme remains until erased or until you

press AOPEN/CLOSE. The programme you have

created remains even after the Programme Play

mode ends or you select another play mode.

• For the recording to the A side or B side of the

cassette tape, you can pause Programme Play.

Notes

• The total playing time doesn’t appear in the

display when it exceeds 100 minutes.

• If you programme a track numbered over 24 (or 68

for the CDP-XE370/XE270), “– – . ––” appears

instead of the total playing time.

•“PROGRAM FULL” (or “FULL” for the CDP-

XE370/XE270) appears in the display when you

try to add a track to a programme which already

contains 24 tracks.

Checking the track order

(CDP-XE570/XE370 only)

You can check your programme before or after

you start playing.

Press CHECK.

Each time you press this button, the display

shows the track number in the programmed

order. After the last track in the programme, the

display shows “- END -” (or “End” for CDP-

XE370) and returns to the original display. If

you check the order after you start playing, the

display shows only the remaining track

numbers.

Changing the track order

You can change your programme before you

start playing.

Erase a track

Erase the last track

in the programme

Add tracks to the

end of the

programme

Change the whole

programme

completely

You need to

Press CHECK until the track you

don’t want appears in the display,

then press CLEAR (CDP-XE570/

XE370 only).

Press CLEAR. Each time you

press the button, the last track will

be cleared.

Turn lAMSL until the

track number you want to add

appears, then push

lAMSL.

When using the remote, press the

number buttons of the tracks to be

added (CDP -XE570/XE370

only).

Hold down CLEAR until

“CLEAR” (for the CDP-XE570)

or “CLEAr” (for the CDP-XE370/

XE270) appears in the display.

Create a new programme

following the programming

procedure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XE570 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-XE570

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info