Bedienungsanleitung Sony CDP-XE900E (Seite 11 von 46) (Englisch, Französisch, Spanisch)

50647

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Playing CDs

The programme remains even after the Programme

Play ends

When you press (, you can play the same programme

again.

You can check the total playing time while

programming using the remote (Programme Edit)

To select a track, press = or + and check the total

playing time. Then press PROGRAM to confirm your

selection.

Notes

• The total playing time doesn’t appear in the display when it

exceeds 100 minutes.

• “FULL” appears in the display when you try to add a track

to a programme which already contains 24 tracks.

Checking the track order

You can check your programme before or after you

start playing.

Press CHECK.

Each time you press this button, the display shows the

track number in the programmed order. After the last

track in the programme, the display shows “End” and

returns to the original display. If you check the order

after you start playing, the display shows only the

remaining track numbers.

Changing the track order

You can change your programme before you start

playing.

Erase a track

Erase the last track in

the programme

Add tracks to end of

the programme

Change the whole

programme completely

Recording Your Own Programme

You can record the programme you’ve created on a

tape, DAT or MD. The programme can contain up to 24

tracks.

By inserting a pause during programming, you can

divide the programme into two for recording on both

sides of a tape.

Recording From CDs

Playing a CD

PLAY MODE

·P

ENTER

AMS ±

You need to

Press CHECK until the track you

don’t want appears in the display,

then press CLEAR

Press CLEAR. Each time you press

the button, the last track will be

cleared.

Turn AMS ± until track

number you want to add appears,

then press ENTER.

When using the remote, press the

number button of the tracks to be

added.

Press p (stop). Create a new

programme following the

programming procedure.

1 Create your programme (for side A when

recording on a tape) while checking the total

playing time indicated in the display.

Follow Steps 1 to 4 in “Creating a programme on

the player” on page 10 or Steps 1 and 2 in

“Creating a programme using the remote” on

page 10.

The

indication appears in the display.

2 When you record on both sides of the tape, press

P to insert a pause.

The “P” and

A B

indications appear in the display

and the playing time is reset to “0.00.”

When you record on one side of the tape or on a

DAT or MD, skip this step and go to Step 4.

A pause is counted as one track

You can programme up to 23 tracks when you insert a

pause.

3 Repeat Step 1 to create the programme for side B.

4 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the programme for side

5 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

To check and change your programme

See the left column of this page.

The

indication appears while checking the

programme for side A and

while checking the

programme for side B.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-XE900E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info