Bedienungsanleitung Sony CDR-W33 (Seite 21 von 34) (Englisch)

628652

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Operations on the Disc’s TOC Area

Operations on the disc’s TOC Area

5 “PMA Write?” will be displayed. Select

whether to record in the PMA area.

If you write to the PMA area, the setting

information will remain even if the disc is

removed from the CD recorder, and so remains

valid even if another disc is inserted. If not

writing to the PMA area, press the MENU/NO

button. The setting information will not be

written to the disc. In this case, the setting

information will be stored until the disc is

removed or the power is turned OFF.

You can play discs without the skip that has been set.

Turn OFF “Skip Play” in the menu. The skip setting will

be ignored, and all recorded tracks will be played.

Limits to the number of times you can write skip

information to the PMA area of a disc.

CD-R DISC:

The area to which skip information can be written on a

disc is limited. Consequently, write skip/unskip

information to the PMA area immediately before

removing the disc, and avoid writing the information an

unnecessary number of times. The number of times the

information can be written depends on the number of

tracks set at the time. The skip memory area in which

skip information is set, and the unskip memory area in

which previous skip settings are undone store 21 blocks

each. Each block can store a maximum of 6 tracks. For

example, recording a 7th skip track in one block will

result in a second block being used. The same is true for

the unskip operation. When all 21 blocks for both skip

and unskip have been used, you cannot make additional

settings.

CD-RW DISC:

There are no limits to the number of times you can write

to the PMA, but the maximum number of skip settings is

21 tracks.

Unfinalizing

CD-RW

You can restore CD-RW disc to the status they were

immediately before the disc was finalized. This

operation is called unfinalizing. You cannot add further

recordings or delete tracks from a finalized CD-RW

disc, but can do so by unfinalizing the disc.

You cannot cancel an unfinalize operation once it

has started.

Unfinalizing takes approximately 80 seconds from

start to finish. During this time, do not turn OFF the

power supply to the CD recorder. The disc’s TOC

information will be corrupted, and you will no

longer be able to use the disc.

Operating Procedure

This operation is valid only with finalized CD-RW

discs.

1 Press the ERASE button.

“Start?” and “ENTER/YES” will be displayed

alternately for verification. Press the MENU/NO

button to quit.

2 Press the AMS button or the YES button.

“Unfinalize” will flash. The countdown time

remaining until unfinalizing finishes will be

displayed. When the display stops flashing,

unfinalizing is complete.

Unfinalizing discs with disc name and track name

information.

The information is stored until the disc is removed or the

power supply is turned OFF, in the same state as after it

was entered. Consequently, you can edit the information

or add other tracks names.

Writing skip settings to the PMA.

123456

4 tracks written to PMA 1st time.

123456

123456 7 tracks written to PMA 2nd time.

123456

2Tr 3Tr 5Tr 8Tr

4Tr 6Tr 7Tr

10Tr 11Tr 13Tr

15Tr

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDR-W33 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info