Bedienungsanleitung Sony CDR-W33 (Seite 27 von 34) (Englisch)

628652

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Control Terminal Functions and Settings

Connecting a Keyboard

Connect the keyboard connector to the keyboard

terminal on the front panel of the CD recorder. The

keyboard will be enabled approximately 4 seconds

after connection.

Selecting Keyboard Type

Select whether the keyboard is Japanese or English

using the menu operations.

1 Press the MENU/NO button and turn the AMS

control. Display “PC Keyboard”, and then press the

AMS control or the YES button.

2 Turn the AMS control to select one of the following.

JP Type: Use a Japanese keyboard.

US type: Use an English keyboard.

3 Press the AMS control or YES button.

The functions of all the buttons on the CD recorder and

the remote are allocated to the keyboard, so you can

perform various operations using the keyboard instead

of the CD recorder and the remote. The key allocations

are shown in the following diagram.

Entering Track Names and Disc Name Using the

Keyboard

You can enter track names and disc name using the

keyboard. The keyboard is useful for directly entering

alphabet and numbers. For the operating procedure,

refer to page 18, “Adding Track Name and Disc Name

(NAME)”.

Control-S Input Terminal

(CTRL-S)

The Control-S input terminal on the CD recorder can

perform control operations from external devices by

connecting external devices other than the supplied

remote control to system controller, which is equipped

with a CTRL-S terminal.

Controllable Functions

You can control all the same functions as with the

remote control. When the remote is plugged into the

control-S terminal, the infrared sensor is disabled.

Keyboard Terminal

Installing a Keyboard

You can use any keyboard * that is IBM ** PC/AT or

compatible with a PS/2 interface. You can use either a

Japanese or English keyboard. (Recommended

keyboard: SONY KB-10.) Use a keyboard with a current

consumption of 120 mA max.

** IBM is a registered trademark of International

Business Machines Corporation.

* Power consumption must be 120mA or less.

Control Terminal Functions and Settings

*.: Shift + Tab

REC z: Shift + Enter

MUSIC SYNC: Ctrl + Enter

Adding Names

Use the Caps Lock key to switch between uppercase

and lowercase characters.

Esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12

Backspace

ASDFGHJ

1234567890

@# $% & '

(

)

QWERTY'U

{

}

]

[

Ta b

Caps Lock

ZXCVBNM

Shift

Ctrl CtrlAlt Alt

Shift

Insert

Ins

Del

PgDn

PgUp

Enter

Home

/*–

Home

Page

Num

Lock

789

456

Delete End

End

Page

Down

Enter

Screen

Scroll

Lock

Pause

MENU/NO

PLAY MODE

Enter track numbers

higher than 10

NAME

(Use the 0 key to play track 10)

or YES

FINALIZE DISPLAY

FADER REPEAT

CLEAR

LEVEL UP

LEVEL DOWN

MUSIC SCAN

A B REPEAT

SCROLL

REC MUTE

OPEN/CLOSE

Press the key corresponding to

the number to play that track

Press the key corresponding to

the number to play that track

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDR-W33 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info