Bedienungsanleitung Sony CDX-GT620 (Seite 13 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

62190

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the select button repeatedly

until the desired item appears.

2 Rotate the control dial to adjust the

selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press the select

button repeatedly to select “EQ3.”

2 Rotate the control dial to select

“CUSTOM.”

3 Press the select button repeatedly

until “LOW,” “MID” or “HI” appears.

4 Rotate the control dial to adjust the

selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the control dial to select the

setting (example “ON” or “OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

“

z” indicates the default settings.

EQ3

To select an equalizer type: “XPLOD,”

“VOCAL,” “EDGE,” “CRUISE,” “SPACE,”

“GRAVITY,” “CUSTOM” or “OFF (

z).”

DSO

To select the DSO mode: “1,” “2,” “3” or “OFF

(

z).” The larger the number, the more enhanced

the effect.

LOW*

, MID*

, HI*

(page 13)

To customize the equalizer curve.

BAL (Balance)

To adjust the balance between the right and left

speakers: “RIGHT-10” – “CENTER” (

z) –

“LEFT-10”

FAD (Fader)

To adjust the balance between the front and rear

speakers: “FRONT-10” – “CENTER” (

z) –

“REAR-10”

SUB (Subwoofer volume)

To adjust the subwoofer volume: “+10 dB” –

“0 dB” (

z) – “–10 dB”

(“ATT” is displayed at the lowest setting.)

AUX*

(AUX level)

To adjust the volume level for each connected

auxiliary equipment. This setting negates the

need to adjust the volume level between sources

(page 14).

Adjustable level: “+18 dB” – “0 dB” (

z) –

“–8 dB”

*1 When EQ3 is activated.

*2 When AUX source is activated.

CLOCK-ADJ (Clock Adjust) (page 4)

CT (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 10, 11).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*

(AUX Audio)

To turn the AUX source display “AUX-A-ON”

(

z) or “AUX-A-OFF” (page 14).

continue to next page t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDX-GT620 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info