452396
21
Zoom out
Zoom in
Vorherige Seite
1/172
Nächste Seite
21
Customizing the display and
button color — Custom Color
You can register a customized color for the
display and buttons.
About DAY/NIGHT color mode
You can set a different color for DAY/NIGHT.
The display color changes for DAY/NIGHT
color mode as below.
* Available only when the illumination control lead is
connected.
For details on the DIMMER, see page 25.
1 Press and hold (COLOR).
The DAY/NIGHT custom color display varies
according to the DIMMER setting.
To change the DAY/NIGHT color mode, see
page 21.
2 Rotate the control dial until “BASE
COLOR” appears, then press it.*
You can select a preset color as a basis for
further customizing.
To not customize a preset color, skip to step 5.
* When you select “BASE COLOR,” customized color
is overwritten.
3 Rotate the control dial to select from
“RGB RED,” “RGB GREEN,” or “RGB
BLUE, then press it.
4 Rotate the control dial to adjust the
color range, then press it.
Adjustable color range: “0” – “32.
You cannot set “0” for all color ranges at the
same time.
5 Press (BACK).
The display returns to normal reception/play
mode.
Changing DAY/NIGHT color mode
1 Select “DAY/NIGHT” in step 2.
2 Select “DAY” or “NIGHT.
3 Customize the preset channel from step 2 to 5.
Tip
You can set the DAY/NIGHT color mode from the
setup menu.
Advanced color setting
SensMe™ Channels
synchronization
— SensMe™ Channels Color
The color of the display and buttons on the main
unit changes according to the SensMe™ channel.
1 Press and hold the select button.
The setup display appears.
2 Rotate the control dial until “SENSME
COLR” appears, then press it.
3 Rotate the control dial to select
“SENSME-ON,” then press it.
4 Press (BACK).
The setting is complete and the display
returns to normal reception/play mode.
To cancel SensMe™ Channels Color, select
“OFF” on step 3.
Note
When SensMe™ Channels Color is set to “ON” for the
SensMe™ source, SensMe™ Channels Color
overrides the preset color/pattern settings. The color/
pattern setting changes to the preset color/pattern if
you turn off SensMe™ Channels Color or change the
source to other than SensMe™.
Changing the color with sound
synchronization
— Sound Synchronization
The color changes according to synchronization
of playing music. When you select a preset
pattern or play tracks in the SensMe channel,
sound synchronization becomes effective.
1 Press and hold the select button.
The setup display appears.
2 Rotate the control dial until “SOUND
SYNC” appears, then press it.
3 Rotate the control dial to select
“SYNC-ON,” then press it.
4 Press (BACK).
The setting is complete and the display
returns to normal reception/play mode.
Note
May not be synchronized correctly.
Color mode DIMMER
DAY OFF or AUTO (turn off
the head light*)
NIGHT ON or AUTO (turn on
the head light*)
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony CDX-GT650UI wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info