Bedienungsanleitung Sony CDX-GT710 (Seite 13 von 120) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

63431

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press (SOUND).

2 Rotate the volume control dial until the

desired menu item appears, then

press (ENTER).

3 Rotate the volume control dial to

select the setting, then press (ENTER).

The setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

With the card remote commander

In steps 2 to 3: press M or m instead of the volume

control dial.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

* When AUX source is activated.

Customizing the equalizer curve

— EQ3 Tune

“Custom” of EQ3 allows you to make your own

equalizer settings.

1 Select a source, then press (SOUND).

2 Rotate the volume control dial to

select “EQ3 parametric,” then press

(ENTER).

3 Rotate the volume control dial to

select “Custom,” then press (SEEK) +

up.

4 Rotate the volume control dial to

select “EQ3 Mode Tune,” then press

(ENTER).

5 Rotate the volume control dial to

select the desired frequency range

from “LOW,” “MID” or “HI,” then press

(ENTER).

6 Rotate the volume control dial to

select the center frequency you wish

to adjust, then press (SEEK) + up.

Selectable frequency in each range:

LOW: 60 Hz or 100 Hz

MID: 500 Hz or 1.0 kHz

HI: 10.0 kHz or 12.5 kHz

7 Rotate the volume control dial to

adjust the equalizer curve.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

8 Press (ENTER).

Repeat steps 5 to 8 to adjust other frequency

ranges.

9 Press (SEEK) – down.

The display returns to normal play/reception

mode.

To restore the factory-set equalizer curve,

select “EQ3 Mode Initialize” and “Yes” in

step 4.

Tip

Other equalizer types are also adjustable.

With the card remote commander

In steps 2 to 7: press M or m instead of the volume

control dial; in step 3, 6 and 9: press < or , instead

of (SEEK) –/+.

EQ3 parametric

To select an equalizer type: “Xplod,” “Vocal,”

“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”

or “off” (

z).

DSO

To select the DSO mode: “1,” “2,” “3” or “off”

(

z). The larger the number, the more enhanced

the effect.

Balance

To adjust the balance between the right and left

speakers: “R10” – “0” (

z) – “L10”

Fader

To adjust the balance between the front and rear

speakers: “F10” – “0” (

z) – “R10”

Subwoofer

To adjust the subwoofer volume: “+10” – “0”

(

z) – “–10”

(“– ∞” is displayed at the lowest setting.)

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off”

(

z), “125Hz” or “78Hz.”

AUX Level*

To adjust the volume level for each connected

auxiliary equipment. This setting negates the

need to adjust the volume level between sources

(page 14).

Adjustable level: “+18 dB” – “0 dB” (

z) –

“–8 dB”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDX-GT710 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info