Bedienungsanleitung Sony cdx gt740ui (Seite 19 von 140) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

168977

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Other functions

Changing the sound settings

Adjusting the sound

characteristics

1 Press the control dial.

2 Rotate the control dial until the

desired menu item appears, then

press it.

Depending on the setting, by rotating the

control dial again, further parameters can be

set.

3 Rotate the control dial to select the

setting, then press it.

4 Press (BACK).

The setting is complete and the display

returns to normal play/reception mode.

The following items can be set:

Customizing the equalizer curve

— EQ3 Parametric Tune

“Custom” of EQ3 Parametric Preset allows you

to make your own equalizer settings.

Select “Custom” of EQ3 Parametric Preset.

1 Select a source, then press and hold

the control dial.

2 Rotate the control dial to select “EQ3

Parametric Tune,” then press it.

3 Setting the equalizer curve.

You can adjust the equalizer center frequency,

volume level and bandwidth in each range

from “Low,” “Mid”, or “Hi.”

1 Rotate the control dial until the desired

menu item appears, then press it.

2 Rotate the control dial to select the

setting, then press it.

Selectable frequency in each range:

Low: 60 Hz or 100 Hz

Mid: 500 Hz or 1.0 kHz

Hi: 10.0 kHz or 12.5 kHz

Adjustable volume level: “+10 dB” –

“0 dB” – “–10 dB.”

EQ3 Parametric Preset

Selects an equalizer curve from 7 music types.

EQ3 Parametric Tune*

Custom equalizer settings.

Subwoofer Tune & LPF

Phase

Selects the phase (effective only when LPF is

on): “Normal,” “Reverse.”

FREQ

Selects the subwoofer cut-off frequency:

“80Hz,” “100Hz,” “120Hz,” “140Hz,” “160Hz,”

“OFF.”

Level

Adjusts the subwoofer volume: “+10dB” –

“0dB” – “–10dB.”

(“– ∞” is displayed at the lowest setting.)

HPF & Speaker Select

Speaker

Selects the Speaker: “All,” “Front”, or “Rear.”

FREQ

Selects the cut-off frequency: “OFF,” “80Hz,”

“100Hz,” “120Hz,” “140Hz,” “160Hz.”

DSO (Dynamic Soundstage Organizer)

Creates a more ambient sound field.

To select the DSO mode: “1,” “2,” “3,” or “off.”

The larger the number, the more enhanced the

effect.

Fader & Balance

Fader

Adjusts the relative level: “Front:15”– “Center”

– “Rear:15.”

Balance

Adjusts the sound balance: “Right:15”–

“Center” – “Left:15.”

AUX Level*

Adjusts the volume level for each connected

auxiliary equipment: “+18 dB” – “0 dB” – “–8

dB.”

This setting negates the need to adjust the

volume level between sources.

*1 Hidden when EQ3 Parametric Preset is set to “off.”

*2 When AUX source is activated.

continue to next page t

60Hz

MID HI

100Hz 500Hz 1.0kHz 10.0kHz 12.5kHz

LOW

10dB

+10dB

0dB

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cdx gt740ui Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info