Bedienungsanleitung Sony cdx s 2050 c (Seite 9 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

166938

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

CDX-S2050V/S2050C/S2050

2-348-403-21 (1)

H:\Data Disk\2348403211\234840321CDXS2050VEUR\01GB02CD-EUR.fm masterpage:RightH:\Data Disk\2348403211\234840321CDXS2050VEUR\01GB02CD-EUR.fm masterpage:Right

Other functions

Changing the sound

settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer

volume.

1 Press (SEL) repeatedly until “BAL,”

“FAD” or “SUB” appears.

The item changes as follows:

LOW*

t MID*

t HI*

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)*

*1 When EQ3 is activated (page 9).

*2 When the audio output is set to “SUB” (page 9).

“ATT” is displayed at the lowest setting, and can

be adjusted up to 20 steps.

2 Press the volume +/– button

repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Note

Adjust within 3 seconds of selecting the item.

With the card remote commander

In step 2, to adjust the selected item, press < or ,.

Adjusting the equalizer curve

— EQ3

You can adjust and store the equalizer settings

for different tone ranges.

1 Select a source, then press (EQ3)

repeatedly to select the EQ3 mode.

2 Press (SEL) repeatedly until “LOW,”

“MID” or “HI” appears.

3 Press the volume +/– button

repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold (SEL) before the setting is

complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

With the card remote commander

In step 3, to adjust the selected item, press < or ,.

Adjusting setup items

— SET

1 Press and hold (SEL) .

The setup display appears.

2 Press (SEL) repeatedly until the

desired item appears.

3 Press the volume +/– button to select

the setting (example “ON” or “OFF”).

4 Press and hold (SEL) .

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

With the card remote commander

In step 2, to select the setup item, press M or m. In

step 3, to select the setting, press < or ,.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

CLOCK-ADJ

(Clock Adjust)

(page 4)

CT (Clock

Time)

To set “CT-ON” or “CT-OFF”

(z) (page 7, 8).

BEEP To set “BEEP-ON” (

z) or

“BEEP-OFF.”

REAR/SUB*

To switch the audio output.

– “REAR”: to output to a

power amplifier.

–“SUB” (

z): to output to a

subwoofer.

DIM (Dimmer) To change the brightness of the

display.

–“DIM-ON”: to dim the

display.

– “DIM-OFF” (

z): to

deactivate the dimmer.

ILM-1/ILM-2

(Illumination)

(CDX-S2050C

only)

To change the illumination

colour.

– “ILM-1” (

z): Amber

– “ILM-2”: Green

DEMO*

(Demonstration)

To set “DEMO-ON” (

z) or

“DEMO-OFF” (page 4).

REG*

(Regional)

To set “REG-ON” (z) or

“REG-OFF” (page 8).

continue to next page t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cdx s 2050 c Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info