Bedienungsanleitung Sony cdx s 2250 (Seite 14 von 92) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

166940

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

• Lead-free solder is used for soldering certain parts.

(more than 80 %)

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• Packaging cushions do not use polystyrene foam.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check

the connection and operating procedures.

General

No power is being supplied to the unit.

• Check the connection. If everything is in order,

check the fuse.

• If the unit is turned off and the display

disappears, it cannot be operated with the

remote commander.

t Turn on the unit.

The power aerial does not extend.

The power aerial does not have a relay box.

No sound.

• The volume is too low.

• The ATT function is activated, or the Telephone

ATT function (when the interface cable of a car

telephone is connected to the ATT lead) is

activated.

• The position of the fader control (FAD) is not

set for a 2-speaker system.

No beep sound.

• The beep sound is cancelled (page 9).

• An optional power amplifier is connected and

you are not using the built-in amplifier.

The contents of the memory have been

erased.

• The RESET button has been pressed.

t Store again into the memory.

• The power connecting lead or battery has been

disconnected.

• The power connecting lead is not connected

properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the

ignition key is switched.

The leads are not matched correctly with the

car’s accessory power connector.

The display disappears from/does not

appear in the display window.

• The dimmer is set “DIM-ON”(page 9).

• The display disappears if you press and hold

(OFF).

t Press and hold (OFF) again until the

display appears.

• The connectors are dirty (page 12).

CD playback

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside

down or in the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use

(page 11).

MP3 files cannot be played back.

The disc is not corresponding to the MP3 format

and version (page 11).

MP3 files take longer to play back than

others.

The following discs take a longer time to start

playback.

–a disc recorded with a complicated tree

structure.

–a disc recorded in Multi Session.

– a disc to which data can be added.

The ATRAC CD cannot play.

• The disc is not created by authorized software,

such as SonicStage or SonicStage Simple

Burner.

• Tracks that are not included in the group cannot

be played.

The display items do not scroll.

• For discs with very many characters, those may

not scroll.

• “A.SCRL” is set to off.

t Set “A.SCRL-ON” (page 9).

The sound skips.

• Installation is not correct.

t Install the unit at an angle of less than

45° in a sturdy part of the car.

• Defective or dirty disc.

The operation buttons do not function.

The disc will not eject.

Press the RESET button (page 4).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cdx s 2250 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info