Bedienungsanleitung Sony CDX-S22 (Seite 9 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

39035

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Other functions

Changing the sound settings

Adjusting the sound

characteristics — BAL/FAD/SUB

You can adjust the balance, fader, and subwoofer

volume.

1 Press (SEL) repeatedly until “BAL,”

“FAD” or “SUB” appears.

The item changes as follows:

LOW*

t MID*

t HI*

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)*

*1 When EQ3 is activated (page 9).

*2 When the audio output is set to “SUB” (page 9).

“ATT” is displayed at the lowest setting, and can

be adjusted up to 20 steps.

2 Press the volume +/– button

repeatedly to adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

With the card remote commander

In step 2, to adjust the selected item, press <, M, ,

or m.

Customizing the equalizer curve

— EQ3

“CUSTOM” of EQ3 allows you to make your

own equalizer settings.

1 Select a source, then press (EQ3)

repeatedly to select “CUSTOM.”

2 Press (SEL) repeatedly until “LOW,”

“MID” or “HI” appears.

3 Press the volume +/– button

repeatedly to adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold (SEL) before the setting is

complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

With the card remote commander

In step 3, to adjust the selected item, press <, M, ,

or m.

Adjusting setup items — SET

1 Press and hold (SEL) .

The setup display appears.

2 Press (SEL) repeatedly until the

desired item appears.

3 Press the volume +/– button to select

the setting (example “ON” or “OFF”).

4 Press and hold (SEL) .

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

With the card remote commander

In step 2, to select the setup item, press M or m. In

step 3, to select the setting, press < or ,.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

*1 When the unit is turned off.

*2 When FM is received.

*3 When the audio output is set to “SUB.”

CLOCK-ADJ (Clock Adjust) (page 4)

CT (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 7, 8).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

SUB/REAR*

To switch the audio output.

–“SUB” (

z): to output to a subwoofer.

– “REAR”: to output to a power amplifier.

DIM (Dimmer)

To change the brightness of the display.

– “DIM-ON”: to dim the display.

– “DIM-OFF” (

z): to deactivate the dimmer.

DEMO*

(Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

A.SCRL (Auto Scroll)

To scroll long displayed item automatically

when the group/track is changed.

– “A.SCRL-ON”: to scroll.

– “A.SCRL-OFF” (

z): to not scroll.

REG*

(Regional)

To set “REG-ON” (z) or “REG-OFF” (page 7).

LPF*

(Low Pass Filter)

To select the subwoofer cut-off frequency

“78HZ,” “125HZ” or “OFF” (

z).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDX-S22 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info