Bedienungsanleitung Sony chc cl 5 md (Seite 20 von 56) (Englisch)

158052

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Recording tips

Recording for long times

This system has two long time recording

modes: LP2 and LP4 (MDLP recording). When

recording in LP2 Stereo mode, you can record

2 times the normal recordable time, and in LP4

Stereo mode, you can record 4 times the

normal recordable time. In addition, the

recordable time for monaural recording is

approximately double the stereo recording

time.

LP4 Stereo mode (4× long time recording

mode) achieves a long stereo recording time by

use of a special compression system. When

placing emphasis on sound quality, Stereo

recording or LP2 Stereo recording (2× long

time recording mode) is recommended.

1 Press REC MODE repeatedly to select

the recording mode.

The display changes cyclically as follows:

STEREO REC (Stereo) t LP2 REC (LP2

Stereo) t LP4 REC (LP4 Stereo) t

MONO REC (Monaural)

2 Start the recording.

The source is recorded in the selected

recording mode.

Notes

• The selected recording mode is kept even after

recording has finished, so be sure to check the

recording mode before recording.

• Tracks recorded in MDLP (LP2 or LP4) Stereo

mode cannot be played back on a system that does

not support MDLP mode.

• Even if you press REC MODE during recording or

recording pause, you cannot change the recording

mode.

• Even if you press REC MODE repeatedly to select

MONO, the monitor signal during recording does

not become monaural.

• You cannot use S.F Edit and some other MD edit

functions for tracks recorded in MDLP mode.

• If you press REC MODE repeatedly to select

MONO REC, “MONO” appears.

To add “LP:” at the beginning of a

track name during MDLP recording

“LP:” appears when you try to play the track on

a system that does not support MDLP mode.

This convenient function lets you know at a

glance that the track cannot be played back.

The factory setting is “On”.

1 Press FUNCTION repeatedly to switch the

function to MD.

2 Press MENU/NO.

3 Turn ./> (or press . or > on

the remote) until “Setup ?” appears.

4 Press ENTER/YES.

5 Turn ./> (or press . or > on

the remote) until “LP Stamp Off” (or “LP

Stamp On”) appears, then press ENTER/

YES.

6 Turn ./> (or press . or > on

the remote) until “LP Stamp On” appears,

then press ENTER/YES.

7 Press MENU/NO.

Notes

• The recorded “LP:” is a stamp which appears to

indicate that the track cannot be played back when

you try to play the track on system that does not

support MDLP mode. It does not appear for systems

that support MDLP mode.

• When set to “On”, “LP:” is recorded as the track

name, so the number of characters that can be input

to an MD is reduced. In addition, when you copy a

track name with “LP:” added, “LP:” is

automatically added to the copied track name. If

you divide an “LP:” track using the Divide function,

“LP:” is also added to the latter track.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony chc cl 5 md Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony chc cl 5 md

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info