Bedienungsanleitung Sony cmt cpx 11 (Seite 12 von 36) (Englisch)

158983

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

To change the AM tuning interval

(except for European models)

The AM tuning interval is factory-preset to

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, tune in any AM station first,

then turn off the system. While holding

TUNING +, press ?/1 on the unit. When you

change the interval, all the AM preset stations

are erased. To reset the interval, repeat the same

procedure.

Note

You cannot change the AM tuning interval in Power

Saving Mode.

Tips

• The preset stations are retained for about half a day

even if you disconnect the mains lead or if a power

failure occurs.

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

To improve tuner reception

When tuner reception is poor, set CD player

power off by the CD power manage function.

CD power is factory set to on.

1 Press FUNCTION repeatedly to switch the

function to CD.

2 Press ?/1 to turn off the system.

3 Press ?/1 on the unit while holding CD x on

the unit.

“CD POWER” and “OFF” appear.

To set the CD power on

Repeat the procedure above, and “CD POWER”

and “ON” appear.

Notes

• When “CD POWER” and “OFF” are selected, CD

access time is increased.

• In Power Saving Mode, switching the CD power on

or off using the CD power manage function is not

possible.

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

(see “Presetting radio stations” on page 11).

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press TUNING MODE repeatedly until

“PRESET” appears in the display.

3 Press +/– (or turn TUNING +/– on the

unit) repeatedly to select the desired

preset station.

Listening to non-preset radio

station

— Manual Tuning

1 Press TUNER/BAND repeatedly to

select “FM” or “AM”.

2 Press TUNING MODE repeatedly until

“AUTO” and “PRESET” disappear from

the display.

3 Press +/– (or turn TUNING +/– on the

unit) repeatedly to tune in the desired

station.

Tips

• To improve broadcast reception, adjust the supplied

antennas, or connect a commercially available

external antenna.

• When an FM stereo program has static noise, press

FM MODE repeatedly until “MONO” appears.

There will be no stereo effect, but the reception will

improve.

• Press TUNING MODE repeatedly until “AUTO”

appears in step 2 above, then press +/– (or turn

TUNING +/– on the unit). The frequency indication

changes and scanning stops when the system tunes in

a station (Automatic Tuning).

• To record the radio programs, use manual recording

(pages 16 and 18).

Listening to the radio

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt cpx 11 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt cpx 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info