Bedienungsanleitung Sony cmt cpz 1 (Seite 28 von 36) (Englisch)

159146

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Should you encounter a problem with your

system, do the following:

1 Make sure the mains lead and speaker

cords are correctly and firmly connected.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

General

“– –:– –” appears in the display.

• A power interruption has occurred. Set the clock

(page 10) and timer settings (pages 22 and 23)

again.

The clock setting/radio presetting/timer is

canceled.

• Redo the following:

– “Setting the clock” (page 10)

– “Presetting radio stations” (page 15)

– “Waking up to music” (page 22)

– “Timer recording radio programs” (page 23)

There is no sound.

• Press VOLUME + or turn VOLUME control on

the unit clockwise.

• Make sure the headphones are not connected.

• Check the speaker connections (page 9).

• There is no audio output during Rec Timer.

Sound comes from one channel, or

unbalanced left and right volume.

• Place the speakers as symmetrically as possible.

• Connect the supplied speakers.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different mains.

• Install a noise filter (commercially available) to

the mains lead.

The timer cannot be set.

• Set the clock again (page 10).

The timer does not function.

• Check the timer setting and set the correct time

(pages 22 and 23).

• Cancel the Sleep Timer function (page 21).

• Make sure the clock is correctly set (page 10).

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15

to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

The remote does not function.

• Remove the obstacle.

• Move the remote closer to the system.

• Point the remote at the system’s sensor.

• Replace the batteries (R6/size AA).

• Locate the system away from the fluorescent light.

Troubleshooting

Problems and remedies

When the STANDBY indicator

flashes

Immediately unplug the mains lead and check

the following items.

• If your system has a voltage selector, is the

voltage selector set to the correct voltage?

Check the voltage for your region, then

make sure the voltage selector is set

correctly.

• Are the + and – speaker cords short-

circuited?

• Are you using the supplied speakers?

• Is anything blocking the ventilation holes

on the rear of the system?

Check all the above items and fix any

problems found. After STANDBY indicator

stops flashing, reconnect the mains lead and

turn on the system. If the indicator still

flashes, or if the cause of the problem cannot

be found even after checking all the above

items, consult your nearest Sony dealer.

**&GI 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt cpz 1 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt cpz 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info