Bedienungsanleitung Sony CMT-DF1 (Seite 23 von 52) (Englisch)

64450

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Disc – Various functions

Notes

• If you cannot play a downloaded DivX VOD file that

you have recorded on a CD-R, the rental period may

have elapsed. Other possible reasons may be that the

version is incorrect, or the settings were incorrect

when you downloaded the file or recorded it on a

CD-R. For details on DivX VOD files, refer to http:/

/www.divx.com.

• You can change the color system of this unit

according to the connected TV (page 9).

Tip

You can reset all the settings except for Parental

Control by performing the operations described under

“To return the settings to the default settings*, perform

reset as follows:” (page 40).

* Except for Parental Control settings

To change the type of signal

output from the system

— Progressive

Progressive is the method for displaying TV

images which reduces flickering, and sharpens

the image. To display using this method, you

need to connect to a TV that accepts progressive

signals.

1 Press DVD (or FUNCTION + or –

repeatedly) to switch the function to DVD.

Playback starts automatically if a disc with auto

playback function is loaded. Press x to stop

playback.

2 Press PROGRESSIVE on the unit.

Each time you press PROGRESSIVE on the

unit, the on-screen display changes as follows:

P-SCAN* y Interlace (default setting)

* “PROGRE” appears in the front panel display

when the system outputs progressive signals.

x P-SCAN

Select this setting when your TV accepts

progressive signals and the TV is connected to

the COMPONENT VIDEO OUT jacks.

Normally select this setting under the above

condition.

Note that the picture will not be clear or no

picture will appear if you select these settings

when either of the above conditions is not met.

x Interlace (default setting)

Select this setting when your TV does not accept

progressive signals or your TV is connected to

the VIDEO OUT jack.

About DVD software types and

the conversion method

DVD software can be divided into 2 types: film-

based software and video-based software.

Video-based software is derived from TV, such

as dramas and sit-coms, and displays images at

30 frames/60 fields per second. Film-based

software is derived from film and displays

images at 24 frames per second. Some DVD

software contains both video and film.

In order for these images to appear natural on

your screen when output in progressive format,

the progressive signals need to be converted to

match the type of DVD software that you are

watching.

Note

When you play video-based software in progressive

signal format, sections of some types of images may

appear unnatural due to the conversion process when

output through the COMPONENT VIDEO OUT jacks.

Even though you set to “P-SCAN,” images from the

VIDEO OUT jack are unaffected as they are output in

the interlace format.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CMT-DF1 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CMT-DF1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info