Bedienungsanleitung Sony cmt gpx 9 dab (Seite 27 von 36) (Englisch)

159143

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Troubleshooting

Should you encounter a problem with your

system, do the following:

1 Make sure the mains lead and speaker

cords are correctly and firmly connected.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

General

“– –:– –” appears in the display.

• A power interruption has occurred. Set the clock

(page 9) and timer settings (pages 21 and 22)

again.

The clock setting/radio presetting/timer is

canceled.

• Redo the following:

– “Setting the clock” (page 9)

– “Presetting radio stations” (page 13)

– “Activate the timer/check the setting” (pages 21

and 22)

– “Timer recording radio programs” (page 22)

There is no sound.

• Press VOLUME + or turn VOLUME on the unit

clockwise.

• Make sure the headphones are not connected.

• Check the speaker connections (page 6).

• There is no audio output during Rec Timer.

• Connect the aerials.

• The specified station has temporarily stopped

broadcast.

• Perform the DAB Automatic Scan procedure

(page 13).

Sound comes from one channel, or

unbalanced left and right volume.

• Place the speakers as symmetrically as possible.

• Connect the supplied speakers.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different mains.

• Install a noise filter (commercially available) to

the mains lead.

The timer cannot be set.

• Set the clock again (page 9).

The timer does not function.

• Check the timer setting and set the correct time

(pages 21 and 22).

• Cancel the Sleep Timer function (page 20).

• Make sure the clock is correctly set.

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15

to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

The remote does not function.

• Remove the obstacle.

• Move the remote closer to the system.

• Point the remote at the system’s sensor.

• Replace the batteries (R6/size AA).

• Locate the system away from the fluorescent light.

The system can not be turned on even though

you have pressed ?/1.

• Make sure the mains lead is connected to mains.

Troubleshooting

Problems and remedies

When the ?/1 indicator flashes

Immediately unplug the mains lead and check

the following items.

• If your system has a voltage selector, is the

voltage selector set to the correct voltage?

Check the voltage for your region, then

make sure the voltage selector is set

correctly.

• Are the + and – speaker cords short-

circuited?

• Are you using the supplied speakers?

• Is anything blocking the ventilation holes

on the rear of the system?

Check all the above items and fix any

problems found. After ?/1 indicator stops

flashing, reconnect the mains lead and turn on

the system. If the indicator still flashes, or if

the cause of the problem cannot be found

even after checking all the above items,

consult your nearest Sony dealer.

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt gpx 9 dab Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt gpx 9 dab

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info