Bedienungsanleitung Sony cmt l1 (Seite 16 von 28) (Englisch)

158827

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Other operations

Tune in a weak

station

Cancel presetting

Change the preset

number

To change the AM tuning interval

(not applicable on the European

model)

The AM tuning interval is factory-preset to 9 kHz (or

10 kHz for some areas). To switch the AM tuning

interval, tune in any AM station first, then turn off the

system. Pressing and holding down FUNCTION,

turn the system back on. When you change the

interval, all the AM preset stations are erased. To

change back to the original interval, repeat the same

procedure.

Tips

• The preset stations are saved in the system’s

memory for about a day even if you disconnect the

power cord or a power failure occurs.

• You can label the preset stations (see page 17).

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

Listening to the radio

You can listen to a radio station either by

selecting a preset station or by manually tuning

in a station.

Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner’s memory first

(see “Presetting radio stations” on page 15).

1 Press TUNER/BAND to select “FM” or

“AM”.

2 Press PLAY MODE/TUNING MODE

repeatedly until “PRESET” appears in

the display.

3 Press TUNING + or – repeatedly to

select the desired preset station (or

station name* or RDS station name**).

* The station name appears only if you have

labelled the station (see “Labelling the preset

stations ” on page 17).

**European model only.

To select a desired preset number

using the numeric buttons on the

remote

Press numeric buttons instead of performing

step 3.

To enter preset number over 10, press >10 and

enter the corresponding digits. To enter 0,

press 10/0 instead.

Example:

To enter preset number 20, press >10, then 2 and

10/0.

Listening to a non-preset

radio station

— Manual Tuning

1 Press TUNER/BAND to select “FM” or

“AM”.

2 Press PLAY MODE/TUNING MODE

repeatedly until “AUTO” and “PRESET”

disappear from the display.

3 Press TUNING + or – repeatedly to tune

in the desired station.

Tips

• To improve the reception, adjust the supplied

antennas or connect an external antenna.

• If there is static during an FM broadcast, press FM

MODE on the remote until “MONO” appears in the

display. The broadcast will no longer be in stereo,

but the reception will improve.

• In step 2, press PLAY MODE/TUNING MODE

repeatedly until “AUTO” appears in the display,

and then press TUNING + or –. The frequency

indication changes and the scanning stops when the

system tunes in a station (Automatic Tuning).

Do this

Follow the procedure

described in “Setting presets

through manual tuning”.

Press MENU/NO on the

remote in step 5 or 6.

Start over from step 1.

Presetting radio stations (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt l1 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt l1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info