Bedienungsanleitung Sony cmt ne5 (Seite 22 von 32) (Englisch)

158986

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Should you encounter a problem with your

system, do the following:

1 Make sure the power cord and speaker

cords are correctly and firmly connected.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

General

“– –:– –” appears in the display.

• A power interruption has occurred. Set the clock

(page 8).

There is no sound.

• Press VOLUME + on the remote repeatedly (or

turn VOLUME on the unit clockwise).

• Make sure the headphones are not connected.

• Check the speaker connections (page 6).

Sound comes from one channel, or

unbalanced left and right volume.

• Place the speakers as symmetrically as possible.

• Connect the supplied speakers.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to

the power line.

The timer cannot be set.

• Set the clock again (page 8).

The timer does not function.

• Press CLOCK/TIMER SELECT on the remote to

set the timer and light up “c PLAY” or “c REC”

in the display (pages 18 and 19).

• Check the timer setting and set the correct time

(pages 18 and 19).

• Cancel the Sleep Timer function (page 17).

• Make sure the clock is correctly set.

The color on the TV screen is irregular.

• Move the speakers farther away from the TV set.

The remote does not function.

• Remove the obstacle.

• Move the remote closer to the system.

• Point the remote at the system’s sensor.

• Replace the batteries (R6/size AA).

• Locate the system away from the fluorescent light.

Speakers

Sound comes from one channel, or the left

and right volumes are unbalanced.

• Check the speaker connections and placement.

CD/MP3 player

The sound drops out.

• The lens is dirty. Clean it with a commercially

available blower.

Play does not start.

• Eject the disc and check whether a disc is loaded.

• Wipe the disc clean (page 26).

• Replace the disc.

• Load the disc that this system can play (page 4).

• Load the disc correctly.

• Load the disc with the label side up.

• Remove the disc and wipe away the moisture on

the disc, then leave the system turned on for a few

hours until the moisture evaporates.

•Press N (or CD/NX on the unit) to start play.

Troubleshooting

Problems and remedies

When the ?/1 indicator flashes

Immediately unplug the power cord and

check the following items.

• If your system has a voltage selector, is the

voltage selector set to the correct voltage?

• Check the voltage for your region, then

make sure the voltage selector is set

correctly.

Check all the above items and fix any

problems found. After ?/1 indicator stops

flashing, reconnect the power cord and turn

on the system. If the indicator still flashes, or

if the cause of the problem cannot be found

even after checking all the above items,

consult your nearest Sony dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt ne5 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt ne5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info