Bedienungsanleitung Sony cmt se 1 (Seite 17 von 24) (Englisch)

158935

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Troubleshooting

“LOCKED” appears.

• Contact your Sony dealer or local authorized Sony

service facility.

The disc does not eject.

• Consult your nearest Sony dealer.

Play does not start.

• Check whether a disc is loaded (The DISC

indicator lights up when a disc is loaded).

• Wipe the disc clean (page 19).

• Replace the disc.

• Load the disc that this system can play.

• Load the disc correctly.

• Load the disc in the player with the label side up.

• Remove the disc and wipe away the moisture on

the disc, then leave the system turned on for a few

hours until the moisture evaporates.

•Press N to start play.

Disc access takes a long time.

• Set “CD PowerOn” by CD power manage

function (page 9).

The sound skips.

• Wipe the disc clean (page 19).

• Replace the disc.

• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the system, or

placing them on separate stands. When you listen

to a track with bass sounds at high volume, the

speaker vibration may cause the sound to skip.

Play does not start from the first track.

• Press PLAY MODE repeatedly until both

“PROGRAM” and “SHUFFLE” disappear to

return to Normal Play.

Tuner

Severe hum or noise/stations cannot be

received.

• Set the proper band and frequency (page 8).

• Connect the antenna properly (page 4).

• Find a place and an orientation that provide good

reception, then set up the antenna again. If you

cannot obtain good reception, we recommend you

connect a commercially available external

antenna.

• The supplied FM lead antenna receives signals

along its entire length, so make sure you extend it

fully.

• Keep the antennas away from the system and

other components.

• Consult your nearest Sony dealer if the supplied

AM antenna has come off the plastic stand.

• Try turning off surrounding electrical equipment.

• Set “CD PowerOff” by CD power manage

function (page 9).

A stereo FM program cannot be received in

stereo.

• Press FM MODE until “MONO” disappears from

the display.

Optional components

There is no sound.

• Refer to General item “There is no sound.”

(page 16) and check the condition of the system.

• Connect the component properly (page 14) while

checking:

– if the cords are connected properly.

– if the cord plugs are firmly inserted all the way.

• Turn on the connected component.

• Refer to the operating instructions supplied with

the connected component and start playing.

• Press MD (TAPE) (or FUNCTION on the unit)

repeatedly to select “MD” or “TAPE” (page 15).

The sound is distorted.

• Set the volume of the connected component

lower.

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony cmt se 1 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony cmt se 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info