Bedienungsanleitung Sony CMTCP100 (Seite 20 von 24) (Englisch)

29914

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Troubleshooting

Should you encounter a problem with your

system, do the following:

1 Make sure the power cord and speaker cords

are correctly and firmly connected.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

General

There is no sound from the speakers.

• Adjust the volume.

• The headphones are connected.

• Check the speaker connections.

There is severe hum or noise.

• A TV or VCR is placed too close to the unit.

Move the unit away from the TV or VCR.

“0:00” (or “AM 12:00”) flashes in the display.

• A power interruption has occurred. Set the clock

(see page 7) and timer settings (see pages 14 and

16) again.

The timer does not function.

• Make sure the clock is correctly set (see page 7).

• You cannot operate the Daily Timer and the

timer recording at the same time.

“c DAILY” and “c REC” do not appear when

you press TIMER SELECT on the remote.

• Make sure each timer is correctly set (see pages

14 and 16).

• Make sure the clock is correctly set (see page 7).

The color on the TV screen is irregular.

• Move the speakers farther away from the TV set.

The remote does not work.

• There is an obstacle between the remote and the

unit.

• You are not pointing the remote in the direction

of the system’s sensor.

• The batteries in the remote have run down.

Replace the batteries.

• Make sure that the batteries are inserted

correctly.

Speakers

Sound comes from only one channel, or the left

and right volumes are unbalanced.

• Check the speaker connections and placement.

CD Player

The CD will not play.

• The CD is dirty.

• The surface of the CD is scratched. Replace the

CD.

• The CD is loaded with the label side down.

• Condensation has built up in the system.

Remove the CD and leave the system turned on

for about an hour until the moisture evaporates.

Play does not start from the first track.

• The player is in Program or Shuffle Play. Press

PLAY MODE repeatedly until “PGM” and

“SHUFFLE” disappear.

Tape Deck

Recording cannot be done.

• There is no tape in the cassette holder.

• The record protect tab has been removed from

the cassette (see page 19).

• The tape has come to the end.

The tape does not record or play, or there is a

decrease in sound level.

• The heads are dirty. Clean them (see page 19).

• The record/playback heads are magnetized.

Demagnetize them (see page 19).

The tape does not erase completely.

• The record/playback heads are magnetized.

Demagnetize them (see page 19).

There is excessive wow or flutter, or the sound

drops out.

• The capstans or pinch rollers are dirty. Clean

them (see page 19).

Noise increases or the high frequencies are

missing.

• The record/playback heads are magnetized.

Demagnetize them (see page 19).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CMTCP100 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CMTCP100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info