Bedienungsanleitung Sony Cybershot DSC-P20 (Seite 67 von 88) (Englisch)

104845

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

Additional information

Precautions

Cleaning the LCD screen

Wipe the screen surface with a cleaning

cloth (not supplied) or a LCD cleaning kit

(not supplied) to remove fingerprints, dust,

etc.

Cleaning the camera surface

Clean the camera surface with a soft cloth

slightly moistened with water, then wipe the

surface dry. Do not use any type of solvent

such as thinner, alcohol or benzine as this

may damage the finish or the casing.

After using your camera at the

seashore or other dusty locations

Clean your camera carefully. Otherwise, the

salty air may corrode the metal fittings or

dust may enter the inside of your camera,

causing a malfunction.

Your camera is designed for use between the

temperatures of 0°C and 40°C (32°F and

104°F). Recording in extremely cold or hot

places that exceed this range is not

recommended.

If the camera is brought directly from a cold

to a warm location, or is placed in a very

damp room, moisture may condense inside

or outside the camera. Should this occur, the

camera will not operate properly.

Moisture condensation occurs

easily when:

•The camera is brought from a cold location

such as a ski slope into a warmly heated

room.

•The camera is taken from an air-

conditioned room or car interior to the hot

outdoors, etc.

How to prevent moisture

condensation

When bringing the camera from a cold place

to a warm place, seal the camera in a plastic

bag and allow it to adapt to conditions at the

new location over a period of time (about an

hour).

If moisture condensation occurs

Turn off the camera and wait about an hour

for the moisture to evaporate. Note that if

you attempt to record with moisture

remaining inside the lens, you will be unable

to record clear images.

•Unplug the unit from the wall outlet

(mains) when you are not using the unit for

a long time.

•To disconnect the power cord (mains lead),

pull it out by the plug. Never pull the

power cord (mains lead) itself.

•Do not operate the unit with a damaged

cord (mains lead) or if the unit has been

dropped or damaged.

•Do not bend the power cord (mains lead)

forcibly, or place a heavy object on it. This

will damage the cord (mains lead) and may

cause fire or electrical shock.

•Prevent metallic objects from coming into

contact with the metal parts of the

connecting section. If this happens, a short

may occur and the unit may be damaged.

•Always keep metal contacts clean.

•Do not disassemble the unit.

•Do not apply mechanical shock or drop the

unit.

•While the unit is in use, particularly during

charging, keep it away from AM receivers

and video equipment. AM reception and

video operation are disturbed.

•The unit becomes warm during use. This is

not a malfunction.

•Do not place the unit in locations that are:

—Extremely hot or cold

—Dusty or dirty

—Very humid

—Vibrating

On cleaning

Note on operating

temperature

On moisture condensation

On AC power adaptor (not

supplied)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony Cybershot DSC-P20 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony Cybershot DSC-P20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info