Bedienungsanleitung Sony DAR-RD100 (Seite 41 von 508) (Englisch, Spanisch, Polnisch, Schwedisch)

6504

Zoom out

Zoom in

Vorherige Seite

1/508

Nächste Seite

Recording

Before Recording

Before you start recording…

• This recorder can record on various discs. Select

the disc type according to your needs (page 8).

• Use the Title List to check the available

recording time for the disc (page 33). For

DVD+RWs and DVD-RWs, you can erase titles

to free up disc space (page 63).

z Hints

• Up to 49 titles can be recorded on a DVD+RW or

DVD+R. For other recordable discs, 99 titles.

• When using a DVD+RW, you can overwrite a

previously recorded title (page 49).

• You can select the picture size to be recorded on DVD-

RWs (VR mode). Select [4:3] or [16:9] for [Rec Aspect

Ratio] in [Rec Setting] Setup (page 83).

Recording mode

Like the SP or LP recording mode of VCRs, this

recorder has four different recording modes.

Select a recording mode according to the time and

picture quality you need. For example, if picture

quality is your top priority, select the High Quality

mode (HQ). If recording time is your priority,

Super Long Play mode (SLP) can be a possible

choice.

Press REC MODE repeatedly to switch the

recording modes.

Note that the recording time in the following table

is an approximate guide.

Notes

• Situations below may cause slight inaccuracies with

the recording time.

– Recording a programme with poor reception, or a

programme or video source of low picture quality.

– Recording on a disc that has already been edited.

– Recording only a still picture or just sound.

• The available remaining recording time displayed is an

estimate and the actual time may differ.

Recording stereo and bilingual

programmes

This recorder can receive and record stereo and

bilingual programmes based on the ZWEITON

system or the NICAM system.

Before you start recording bilingual programmes,

press the (audio) button repeatedly to select

the audio channel (Main+Sub, Main, or Sub). The

selected channel is displayed on the TV screen and

applied to the recording. For timer recordings,

“Main+Sub” is automatically selected. Note that

you cannot switch the audio channel while

recording.

ZWEITON (German stereo) system

When a stereo or bilingual ZWEITON based

programme is received, “ST” or “BIL” appears in

the front panel display.

NICAM system

When a stereo or bilingual NICAM based

programme is received, “NICAM” appears in the

front panel display.

To record a NICAM programme, be sure to set

[NICAM/Standard] of [Channel Settings] in

[Settings] Setup to on (default). If the sound is not

clear when listening to NICAM broadcasts, set

[NICAM/Standard] to off (see “[Channel

Settings]” on page 75).

z Hints

• When playing on other DVD equipment, you may not

be able to switch between the main and sub sounds for

bilingual programmes. Select either “Main” or “Sub”

before you start recording if you plan to play the disc

on other DVD equipment.

• You can switch the audio channel and select the

speaker output (page 89).

Recording mode Recording time

(minute)

HQ (High quality) 60

SP (Standard mode) R 120

EP r 240

SLP (Long duration) 360

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DAR-RD100 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DAR-RD100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info