Bedienungsanleitung Sony DAR-RD100 (Seite 44 von 508) (Englisch, Spanisch, Polnisch, Schwedisch)

6504

Zoom out

Zoom in

Vorherige Seite

1/508

Nächste Seite

Rec Mode Adjust

If there is not enough available disc space for the

recording, the recorder automatically selects the

recording mode that will record the entire

programme. To use this function, select [AT] for

the recording mode and set [PDC/VPS] to [Off].

If timer settings overlap

If timer settings overlap, [Dup. Date] will appear

in the Timer List. For details, see “When timer

settings overlap” (page 46).

To confirm, change, or cancel timer recording

See “Checking/Changing/Cancelling Timer

Settings (Timer List)” (page 46).

z Hints

• You can play the recorded programme by selecting the

programme title in the Title List menu.

• You can use the recorder after setting the timer. Just

press DVD '/1 to turn on the recorder. Press DVD '/

1 again to set the recorder to standby mode before the

timer recording starts.

Notes

• Check that the clock is correctly set before setting the

timer recording. If not, the timer recording cannot be

made.

To record a satellite programme, turn on the satellite

tuner and select the satellite programme you want to

record. Leave the satellite tuner turned on until the

recorder finishes recording.

• The recorder must be in standby mode for the timer

recording to be made.

• Even if the timer is set, timer recordings cannot be

made while recording a programme that has priority.

• Even if the timer is set for the same daily or weekly

programme, the timer recording cannot be made if it

overlaps with a programme that has priority. [Dup.

Date] will appear for the overlapped setting in the

Timer List. Check the priority order of the settings

(page 46).

• The Rec Mode Adjust function only works with a timer

recording and the PDC/VPS function set to off. It does

not function with Quick Timer (page 48).

• The beginning of some recordings may not be made

when using the PDC/VPS function.

• If the TIMER REC indicator flashes on the front panel,

check that a recordable disc is inserted correctly and

available recording time on the disc is enough.

Recording TV programmes using the

ShowView system

The ShowView system is a feature that simplifies

setting the timer. Just enter the ShowView number

listed in the TV programme guide. The date, time,

and channel of that programme are set

automatically.

Check that the channels are correctly set in

[Channel Settings] in [Settings] Setup (page 75).

1 Insert a recordable disc.

2 Set the AMP/DVD switch to DVD, and press

TIMER twice.

• If the Timer List or [Timer Standard] menu

appears, press TIMER repeatedly to switch

the display to [ShowView].

3 Press the number buttons to enter the

ShowView number.

• If you make a mistake, press CLEAR and re-

enter the correct number.

1 2 3

4 6

7 8 9

</M/m/,,

ENTER

TIMER

Number

buttons

CLEAR

O RETURN

DVD '/1

AMP/DVD

switch

Toda y

Repeat

Number

ShowView

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DAR-RD100 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DAR-RD100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info