Bedienungsanleitung Sony DAR-RD100 (Seite 48 von 508) (Englisch, Spanisch, Polnisch, Schwedisch)

6504

Zoom out

Zoom in

Vorherige Seite

1/508

Nächste Seite

To stop recording

Press x. Note that it may take a few seconds for

recording to stop.

To pause recording

Press X. To restart recording, press the button

again.

To watch another TV programme while

recording

If your TV is connected to the LINE 1-TV jack, set

your TV to the TV input using the

t TV/DVD

button and select the programme you want to

watch. If your TV is connected to the LINE 2 OUT

or COMPONENT VIDEO OUT jacks, set the TV

to TV input using the

t TV/DVD button

(page 98).

z Hint

If you do not want to watch TV while recording, you can

turn off the TV. When using a decoder, make sure to

leave it on.

Notes

• After pressing z REC, it may take a short while to start

recording.

• You cannot change the recording mode while

recording or during recording pause.

• If there is a power failure, the programme you are

recording may be erased.

• You cannot watch a PAY-TV/Canal Plus programme

while recording another PAY-TV/Canal Plus

programme.

Using the Quick Timer function

You can set the recorder to record in 10-minute

increments.

Press z REC repeatedly to set the duration.

Recording starts after the first press. The Quick

Timer starts from the second press, and then each

additional press increases the recording time by 10

minutes within the available free space on the disc.

The remaining recording time appears

momentarily on the TV screen.

The time counter in the front panel display

decreases to 0:00 (or when the disc is full), then

the recorder stops recording (power turns off).

To check the Quick Timer

Press z REC once while recording. The

remaining recording time and other recording

information (programme position, recording

mode, etc.) appear momentarily on the TV screen.

To cancel or stop the Quick Timer

To return the recorder to normal recording mode,

press z REC twice while recording. [Continue]

appears momentarily on the TV screen.

To stop recording, press x. Note that it may take

a few seconds for recording to stop.

To extend the Quick Timer

Press z REC repeatedly while recording. After

the recorder returns to normal recording mode, the

recording time extends by 10 minutes (up to the

capacity of the disc).

Checking the disc status while

recording

You can check recording information such as

recording time or recording mode, etc.

Set the AMP/DVD switch to DVD, and press

DISPLAY during recording.

Recording information appears on the TV screen.

A Elapsed recording time

B Programme position or input source

C Recording status bar

D Audio channel

E Recording mode

F Available recording time for the disc

Press DISPLAY to turn off the display.

z Hint

While recording, you can check the recording time and

other information, such as disc type/format, title/chapter

10M 20M 30M

Continue

0:19:55

SP 1H 40M Free

MONO

Input : Pr. 8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DAR-RD100 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DAR-RD100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info