Bedienungsanleitung Sony DAR-RD100 (Seite 93 von 508) (Englisch, Spanisch, Polnisch, Schwedisch)

6504

Zoom out

Zoom in

Vorherige Seite

1/508

Nächste Seite

Speaker System Set-Up Menu

“FRONT DIST” (front speaker distance)

Set the front speaker distance from your listening

position between 1.0 to 7.0 m in 0.2 m increments.

The default setting is “3.0

.”

“CEN DIST” (centre speaker distance)

Set the centre speaker distance between the

“FRONT DIST” setting and -1.6 m of the

“FRONT DIST” setting (set in 0.2 m increments).

The default setting is “3.0

.”

“SURR DIST” (surround speaker distance)

Set the surround speaker distance between the

“FRONT DIST” setting and -4.6 m of the

“FRONT DIST” setting (set in 0.2 m increments).

The default setting is “3.0

.”

Notes

• When you select an item, the sound momentarily cuts

off.

• Depending on the setting of other speakers, the

subwoofer sound may be excessive.

• If front and surround speakers are not placed at an

equal distance from your listening position, set the

distance according to the closest speaker.

• Do not place the surround speakers and the centre

speaker farther away from your listening position than

the front speakers.

• Depending on the input stream, the distance settings

may not be effective.

Speaker Level Settings

(“LEVEL”)

You can individually set the loudness of each

speaker. Use the test tone for easy adjustment (go

to “Setting the speaker level by using the test tone”

on page 94).

You can also adjust the levels without using the

test tone. Select “LEVEL” (level) in the AMP

menu. To use the AMP menu, see “Using the

AMP Menu” (page 91).

The default settings are underlined.

“TEST TONE”

“FL LEVEL” (front left speaker level)

Set the front left speaker level between –6 dB to 0

dB in 1 dB increments. The default setting is “0.”

“CEN LEVEL” (centre speaker level)

Set the centre speaker level between –6 dB to +6

dB in 1 dB increments. The default setting is “0

.”

“FR LEVEL” (front right speaker level)

Set the front right speaker level between –6 dB to

0 dB in 1 dB increments. The default setting is

“0

.”

“SR LEVEL” (surround right speaker level)

Set the surround right speaker level between –6

dB to +6 dB in 1 dB increments. The default

setting is “0

.”

“SL LEVEL” (surround left speaker level)

Set the surround left speaker level between –6 dB

to +6 dB in 1 dB increments. The default setting is

“0

.”

“SW LEVEL” (subwoofer speaker level)

Set the subwoofer level between –6 dB to +6 dB

in 1 dB increments. The default setting is “0.”

To adjust the volume of all the speakers at one

time

Press 2 +/– on the remote. Or press VOLUME +/

– on the centre unit.

1.0 - 7.0 m

0 - 7.0 m

“T. TONE OFF”

Emits no test tone.

“T. TONE ON” Emits test tone from the

speakers in turn.

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DAR-RD100 Seite 93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DAR-RD100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info