Bedienungsanleitung Sony dav dz680 (Seite 39 von 124) (Englisch)

160601

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Disc

• [CD]: You can play the CD layer.

When the system is playing a CD layer,

“CD” lights up in the front panel display.

Note

• Each play mode function works only within the

selected layer or playback area.

• When you select a CD layer, you cannot change

playback areas.

• Super Audio CD audio signals are not output from the

HDMI OUT jack.

With PBC (Playback Control) functions, you

can enjoy simple interactive operations, search

functions, and other such operations.

PBC playback allows you to play a VIDEO CD

interactively by following the menu on the TV

screen.

1 Start playing a VIDEO CD with PBC

functions.

The menu for your selection appears.

2 Select the item number you want using

the number buttons.

If you make a mistake, press CLEAR to

cancel the number.

3 Press .

4 Follow the instructions in the menu for

interactive operations.

Refer to the operating instructions supplied

with the disc, as the operating procedure

may differ depending on the VIDEO CD.

To go back to the menu

Press O RETURN.

Note

• Depending on the VIDEO CD, [Press ENTER] in

Step 3 may appear as [Press SELECT] in the

operating instructions supplied with the disc. In this

case, press H.

• To play without using the PBC function, press ./

> or the number buttons while the system is in stop

mode to select a track, then press H or . The

system starts playback. You cannot play still pictures

such as a menu. To return to PBC playback, press x

twice, then press H.

When you stop the disc, the system remembers

the point where you pressed x and “RESUME”

appears in the front panel display. As long as

you do not remove the disc, Resume Play will

work even if the system is set to standby mode

by pressing "/1.

1 While playing a disc, press x to stop

playback.

“RESUME” appears in the front panel

display.

2 Press H.

The system starts playback from the point

where you stopped the disc in Step 1.

Note

• Depending on where you stop the disc, the system

may not resume playback from exactly the same

point.

• The point where you stopped playing may be cleared

when:

– you eject the disc.

– the system enters standby mode (DATA CD/

DATA DVD only).

– you change or reset the settings on the Setup

Display.

– you change the parental control level.

– you change the function by pressing FUNCTION

+/–.

– you disconnect the AC power cord (mains lead).

• For a DVD-VR, VIDEO CD, Super Audio CD, CD,

DATA CD, or DATA DVD, the system remembers

the resume playback point for the current disc.

• Resume Play does not work during Program Play and

Shuffle Play.

• This function may not work properly with some

discs.

Playing a VIDEO CD with PBC

functions (Ver. 2.0)

(PBC Playback)

Resuming playback from the

point where you stopped the

disc

(Resume Play)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dav dz680 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dav dz680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info