Bedienungsanleitung Sony dav dz680 (Seite 59 von 124) (Englisch)

160601

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Disc

[L/R] 3.0 m/10 ft

: Set the front speaker

distance.

[CENTER] 3.0 m/10 ft

3)4)

: Set the center speaker

distance (up to 1.6 meters (5 ft) closer to the

front speakers).

0.9 to 6.9 meters for North American models.

0.0 to 6.9 meters for North American models.

When you perform the Quick Setup (page 28), the

default settings are changed.

This item appears when you set [CENTER] to [YES]

in the [CONNECTION] setting.

x [DISTANCE (SURROUND)]

When you move the surround speakers, be sure

to set the parameters of the distance (B) from

the listening position to the speakers.

You can set the parameters from 0.0 to 7.0

meters

(0 to 23 ft).

[L/R] 3.0 m/10 ft

2)3)

: Set the surround speaker

distance (up to 5.0 meters (16 ft) closer to the

front speakers).

0.0 to 6.9 meters for North American models.

When you perform the Quick Setup (page 28), the

default settings are changed.

This item appears when you set [SURROUND] to

[YES] in the [CONNECTION] setting.

Note

• If all front and surround speakers are not placed at an

equal distance from your listening position, set the

distance according to the closest speaker.

• Do not place the surround speakers farther away from

your listening position than the front speakers.

• Depending on the input stream, the [DISTANCE]

setting may not be effective.

x [LEVEL (FRONT)]

You can adjust the sound level of the front

speakers, center speaker, and subwoofer. You

can set the parameters from –6.0 dB to 0 dB for

[L/R], and from –6.0 dB to +6.0 dB for

[CENTER] and [SUBWOOFER]. Be sure to set

[TEST TONE] to [ON] for easy adjustment.

[L/R] 0.0 dB

: Set the front speaker level.

[CENTER] 0.0 dB

*: Set the center speaker

level.

[SUBWOOFER] +2.0 dB: Set the subwoofer

level.

* This item appears when you set [CENTER] to

[YES] in the [CONNECTION] setting.

x [LEVEL (SURROUND)]

You can adjust the sound level of the surround

speakers. You can set the parameter from –6.0

dB to +6.0 dB. Be sure to set [TEST TONE] to

[ON] for easy adjustment.

[L/R] 0.0 dB

*: Set the surround speaker level.

* This item appears when you set [SURROUND] to

[YES] in the [CONNECTION] setting.

x [TEST TONE]

The speakers will emit a test tone to adjust

[LEVEL (FRONT)] and [LEVEL

(SURROUND)].

[OFF]: The test tone is not emitted from the

speakers.

[ON]: The test tone is emitted from each speaker

in sequence while adjusting the level. When you

select one of the [SPEAKER SETUP] items, the

test tone is emitted from each speaker in

sequence.

Adjust the sound level as follows.

1 Set the [TEST TONE] to [ON].

2 Press C/X/x/c repeatedly to select the

desired speaker and the level.

3 Press .

4 Repeat Steps 1 to 3.

5 Press C/X/x/c repeatedly to set [TEST

TONE] to [OFF] after adjusting the

speaker level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dav dz680 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dav dz680

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info