Bedienungsanleitung Sony dav dz880w (Seite 110 von 136) (Englisch)

371679

110

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

110

USB device

[Data error] appears on the TV

screen when playing a DATA

CD or DATA DVD.

• The MP3 file/JPEG image file/video file you want to play is broken.

• The data is not MPEG1 Audio Layer 3 data.

• The JPEG image file format does not conform to DCF.

• The file has the extension “.jpg” or “.jpeg,” but is not in JPEG format.

• The file you want to play has the extension “.avi” or “.divx” but is not in DivX

format, or is in DivX format but does not conform to DivX Certified profiles.

• The file you want to play has the extension “.mp4” or “.m4v” but is not in MP4

format, or is in MP4 format but does not conform to MPEG4 Simple Profiles.

The system does not work

normally.

• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then

reconnect after several minutes.

The Control for HDMI function

does not work.

• When “HDMI” does not light up in the front panel display, check the HDMI

connection (page 26).

• Set [CONTROL FOR HDMI] in [HDMI SETUP] to [ON] (page 64).

• Make sure that the connected component is compatible with the [CONTROL

FOR HDMI] function.

• Check that the AC power cord (mains lead) of the connected component is

connected securely.

• Check the connected component’s setting for the Control for HDMI function.

Refer to the operating instructions supplied with the component.

• If you change the HDMI connection, connect and disconnect the AC power

cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in

[HDMI SETUP] to [OFF], then set [CONTROL FOR HDMI] in [HDMI

SETUP] to [ON] (page 64).

• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”

(page 73).

No sound is output from the

system and TV while using the

System Audio Control function.

• Set [AUDIO (HDMI)] in [HDMI SETUP] to [ON] (page 65).

• Make sure that the connected TV is compatible with the System Audio Control

function.

• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”

(page 73).

The TV input select does not

change automatically when you

connect the system and TV with

a SCART (EURO AV) cable.

• Set [CONTROL FOR HDMI] in [HDMI SETUP] to [OFF] (page 64).

Symptom Remedy

“OVERLOAD,” “REMOVE

USB,” then “PUSH POWER”

appear in the front panel display.

• A problem has been detected with the level of electrical current from the

(USB) port. Turn off the system and remove the USB device from the

(USB) port. Make sure there is no problem with the USB device. If this display

pattern persists, contact your nearest Sony dealer.

Are you using a supported USB

device?

• If you connect an unsupported USB device, the following problems may occur.

See “Playable USB Devices” (supplement) for the supported device types.

– The USB device is not recognized.

– File or folder names are not displayed on this system.

– Playback is not possible.

– The sound skips.

– There is noise.

– A distorted sound is output.

– Transferring stops before it is finished.

Symptom Remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dav dz880w Seite 110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dav dz880w

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info