Bedienungsanleitung Sony dav-x 10g (Seite 87 von 111) (Englisch)

158497

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

Advanced Settings and Adjustments

masterpage:Right

specdef v20060111

filename[G:\FM\Sony\0607\DAV-X10_CEL\Source\3210565321DAVX10\gb12adv.fm]

model name [DAV-X10]

[3-210-565-32(1)]

x [AUDIO DRC] (DVD VIDEO only)

Narrows the dynamic range of the sound track.

Useful for watching movies at low volume late

at night.

x [AUDIO (HDMI)]

Selects the type of audio signal output from the

HDMI OUT jack.

Note

• A loud noise (or no sound) will be output if you

connect the system to a TV that is not compatible

with DOLBY DIGITAL/DTS (digital theater system)

signals and [AUTO] is selected. In this case, select

[PCM].

• When you connect the system and TV with the HDMI

cable and [AUTO] or [PCM] is selected, AUDIO

DRC, A/V SYNC, TONE, MOVIE/MUSIC, and

sound field are not applied to the sound that is output

from the TV.

x [DivX]

Displays the registration code for this system.

For more information, go to

http://www.divx.com on the Internet.

Returning the settings on the

Setup Display to the default

1 Select [RESET] in Step 4 of “Using the

Setup Display” (page 82) and press .

2 Select [YES] using X/x.

You can also quit the process and return to

the Control Menu by selecting [NO] here.

3 Press .

All the settings explained on pages 83 to 87

return to the default settings. Do not press

[/1 while resetting the system as it takes a

few seconds to complete.

Note

• When you turn the system on after resetting and no

disc is in the unit, the guide message appears on the

TV screen. To perform the Quick Setup (page 18),

press , to return to normal screen, press CLEAR.

• “BASS,” “TREBLE,” (page 34) and “SW LEVEL”

(page 81) settings are also returned to the default.

Returning the sound field

settings or radio settings to

the default

1 Turn off the power.

2 Press and hold "/1 on the unit about 5

seconds.

“MEMORY CLR” and “PUSH POWER”

appear alternately in the front panel display

about 10 seconds.

3 Press "/1.

“CLEARING” appears in the front panel

display and the default settings are returned.

After “CLEARED!” appears, the system is

turned off.

Note

• In Step 3, if you do not press "/1 or press any buttons

other than "/1 on the unit, the system turns on. The

setting is not made.

[OFF]

No compression of dynamic

range.

[STANDARD]

Reproduces the sound track with

the kind of dynamic range that the

recording engineer intended.

[MAX]

Compresses dynamic range fully.

[OFF]

The sound is not output from the

HDMI OUT jack.

[AUTO]

Outputs audio signals that is

matched to the requested audio

stream from the connected TV.

[PCM]

Converts Dolby Digital, DTS

(digital theater system), or 96

kHz/24 bit PCM (pulse code

modulation) signals to 48 kHz/ 16

bit PCM (pulse code modulation).

Returning to the Default

Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dav-x 10g Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dav-x 10g

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info