Bedienungsanleitung Sony dav-x 10g (Seite 90 von 111) (Englisch)

158497

Zoom out

Zoom in

Vorherige Seite

1/111

Nächste Seite

masterpage:Left

specdef v20060111

filename[G:\FM\Sony\0607\DAV-X10_CEL\Source\3210565321DAVX10\gb13add.fm]

model name [DAV-X10]

[3-210-565-32(1)]

If you experience any of the following

difficulties while using the system, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should any

problem persist, consult your nearest Sony

dealer.

Note that if service personnel changes some

parts during repair, these parts may be retained.

Power

The power is not turned on.

• Check that the AC power cord (mains lead) is

connected securely.

•Press "/1 after all indications disappear from the

front panel display.

• Check that nothing obstructs the soft-touch

buttons on the unit.

If “PROTECTOR” and “PUSH POWER” appear

alternately in the front panel display.

Press "/1 to turn off the system, and check the

following items after “STANDBY” disappears.

• Are you using only the specified speakers?

• Is anything blocking the ventilation slots of the

system?

Check the above items and fix any problems. After

“STANDBY” disappears, wait about 20 seconds

before turning on the power by pressing "/1. If the

cause of the problem cannot be found even after

checking all the above items, consult your nearest

Sony dealer.

Picture

There is no picture.

• The SCART (EURO AV) cord is not connected

securely.

• The SCART (EURO AV) cord is damaged.

• The unit is not connected to the correct EURO AV

t INPUT jack (page 10, 21).

• The video input on the TV is not set so that you

can view pictures from the system.

• You have set progressive format but your TV

cannot accept the signal in progressive format. In

this case, return the setting to interlace format (the

default setting) (page 24).

• Even if your TV is compatible with progressive

format (525p/625p) signals, the image may be

affected when you set progressive format. In this

case, return the setting to interlace format (the

default setting) (page 24).

• Re-connect the connecting cord securely.

• The system is connected to an input device that is

not HDCP (high-bandwidth digital content

protection) compliant (“HDMI” on the front panel

does not light up). See page 102.

• If the HDMI OUT jack is used for video output,

changing the [HDMI RESOLUTION] setting in

[SCREEN SETUP] may solve the problem

(page 84).

Connect the TV and the system using a video jack

other than the HDMI OUT, and switch the TV’s

input to the connected video input so that you can

see the on-screen displays. Change the [HDMI

RESOLUTION] setting in [SCREEN SETUP],

and switch the TV’s input back to HDMI. If the

picture still does not appear, repeat the steps and

try other options.

• You have selected “P AUTO” (PROGRESSIVE

AUTO) or “P VIDEO” (PROGRESSIVE

VIDEO) using the RESOLUTION button on the

remote (“PROGRESSIVE” lights up in the front

panel display) even though your TV cannot accept

the progressive signal. In this case, disconnect the

HDMI cable from the unit and then select

“INTERLACE” (INTERLACE) so that the

“PROGRESSIVE” indicator turns off.

• If the signal from the T EURO AV OUTPUT

(TO TV) jack is distorted, change the [HDMI

RESOLUTION] setting in [SCREEN SETUP] to

[720 × 480/576p].

Picture noise appears.

• The disc is dirty or flawed.

Even though you set the aspect ratio in [TV

TYPE] of [SCREEN SETUP], the picture does

not fill the screen.

• The aspect ratio on the disc is fixed.

Color irregularity occurs on the TV screen.

The front speakers in this system are magnetically

shielded to prevent magnetic leakage. However,

some leakage may occur, as a high-strength magnet

is employed. If this happens, check the following

items:

• If the speakers are used with a CRT-based TV or

projector, install the speakers at least 0.3 m from

the TV set.

• If the color irregularity persists, turn off the TV set

once, then turn it on after 15 to 30 minutes.

• If howling occurs, reposition the speakers farther

away from the TV set.

• Make sure that no magnetic object (magnetic latch

on a TV stand, health care device, toy, etc.) is

placed near the speakers.

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dav-x 10g Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dav-x 10g

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info