Bedienungsanleitung Sony dcr-dvd 201 (Seite 132 von 148) (Englisch)

291169

132

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

132

Precautions

Camcorder operation

•Operate your camcorder on 7.2 V (battery

pack) or 8.4 V (AC adaptor) power.

•For DC or AC operation, use the accessories

recommended in these operating

instructions.

•If any solid object or liquid gets inside the

casing, unplug your camcorder and have it

checked by a Sony dealer before operating it

any further.

•Avoid rough handling or mechanical shock.

Be particularly careful of the lens.

•Keep the POWER to off when you are not

using your camcorder.

•Do not wrap your camcorder with a towel,

for example, and operate it. Doing so might

cause heat to build up inside.

•Do not touch the LCD display with your

fingers or a sharp-pointed object.

•If your camcorder is used in a cold place, a

residual image may appear on the LCD

display. This is not a malfunction.

•While using your camcorder, the back of the

LCD screen may heat up. This is not a

malfunction.

On placement

Regardless of whether it is in use or not, avoid

leaving your camcorder in the following

locations. Doing so may cause a malfunction.

•In locations subject to extremely high

temperatures.

Under the hot sun or inside a car when the

windows are closed in summer, your

camcorder may be subjected to too much

heat, and this may cause the outer casing to

lose its shape, or cause the camcorder to

malfunction.

•Under direct sunlight or near a heater

This may cause the outer casing to lose its

shape, or cause the camcorder to

malfunction.

•In locations subject to strong vibration and

magnetic fields.

•In locations subject to strong electric wave

and radio wave.

The recording may not be done correctly.

Maintenance information and

precautions

Moisture condensation

If your camcorder is brought directly from a

cold place to a warm place, moisture may

condense inside your camcorder, on the

surface of the disc, or on the lens. This may

cause a malfunction to your camcorder. If

there is moisture inside your camcorder, the

following indicator appears for 5 seconds.

If moisture condensation has

occurred

Turn off your camcorder, and leave it for about

an hour.

Note on moisture condensation

Moisture may condense when you bring your

camcorder from a cold place into a warm place

(or vice versa) or when you use your

camcorder in a hot place as follows:

•You bring your camcorder from a ski slope

into a place warmed up by a heating device.

•You bring your camcorder from an air-

conditioned car or room to a hot place

outside.

•You use your camcorder after a squall or a

shower.

•You use your camcorder in a hot and humid

place.

You may not use the recording and playback

functions correctly in the above cases.

How to prevent moisture condensation

When you bring your camcorder from a cold

place into a warm place, put your camcorder

in a plastic bag and tightly seal it. Remove the

bag when the air temperature inside the plastic

bag has reached the surrounding temperature

(after about an hour).

flicker for

5 seconds

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dcr-dvd 201 Seite 132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dcr-dvd 201

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info