Bedienungsanleitung Sony dcr hc 62 e (Seite 83 von 100) (Englisch)

291981

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Additional Information

Video head

It is recommended you use a cleaning

cassette (optional) before recording

anything important.

• If the video heads are dirty, video or sound

distortion may be apparent.

• If the following problem occurs, clean the video

heads for 10 seconds with the Sony DVM-

12CLD cleaning cassette (optional).

– Mosaic-pattern noise appears on the playback

picture or the screen is displayed in blue.

– Playback pictures do not move.

– Playback pictures do not appear or the sound

breaks off.

–[x Dirty video head. Use a cleaning

cassette.] appears on the screen during

recording/playback.

• The video heads will wear after long use. If you

cannot obtain a clear image even after using a

cleaning cassette (optional), it might be because

the video heads are worn. Please contact your

Sony dealer or local authorized Sony service

facility to have the video heads replaced.

LCD screen

• Do not exert excessive pressure on the LCD

screen, as it may cause damage.

• If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

• While using your camcorder, the back of the

LCD screen may heat up. This is not a

malfunction.

x To clean the LCD screen

If fingerprints or dust make the LCD screen

dirty, it is recommended you use a soft

cloth to clean it. When you use the LCD

Cleaning Kit (optional), do not apply the

cleaning liquid directly to the LCD screen.

Use cleaning paper moistened with the

liquid.

x On adjustment of the touch panel

(CALIBRATION)

The buttons on the touch panel may not

work correctly. If this happens, follow the

procedure below.

It is recommended you connect your

camcorder to the wall outlet (wall socket)

using the supplied AC Adaptor during the

operation.

1 Slide the POWER switch repeatedly to turn

on the PLAY/EDIT lamp.

2 Touch t [MENU] t

(STANDARD SET) t [CALIBRATION]

t .

The screen changes to 16:9 ratio when

using 4:3 ratio.

3 Touch the “×” displayed on the screen with

the corner of the “Memory Stick Duo” or

the like.

The position of the “×” changes.

To cancel [CALIBRATION], touch

[CANCEL].

If you did not press the right spot, start from

step

3 again.

b Notes

• You cannot calibrate the LCD screen if it is

rotated.

On handling the casing

• If the casing is soiled, clean the camcorder body

with a soft cloth lightly moistened with water,

and then wipe the casing with a dry soft cloth.

• Avoid the following to avoid damage to the

finish.

– Using chemicals such as thinner, benzine,

alcohol, chemical cloths, repellent, insecticide

and sunscreen.

– Handling with above substances on your

hands.

– Leaving the casing in contact with rubber or

vinyl objects for a long period of time.

CALIBRATION

Touch the "x"

1/3

CANCEL

Continued ,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dcr hc 62 e Seite 83

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dcr hc 62 e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info