Bedienungsanleitung Sony DCR-HC96E (Seite 130 von 140) (Englisch)

6381

130

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

130

E:\SONY\2659813111\01US09ADD.fm

DCR-HC36/HC46/HC96

2-659-813-11(1)

• The video heads will wear after long use. If you

cannot obtain a clear image even after using a

cleaning cassette (optional), it might be because

the video heads are worn. Please contact your

Sony dealer or local authorized Sony service

facility to have the video heads replaced.

LCD screen

• Do not exert excessive pressure on the LCD

screen, as it may cause damage.

• If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

• While using your camcorder, the back of the

LCD screen may heat up. This is not a

malfunction.

x To clean the LCD screen

If fingerprints or dust make the LCD screen

dirty, it is recommended you use a soft

cloth to clean it. When you use the LCD

Cleaning Kit (optional), do not apply the

cleaning liquid directly to the LCD screen.

Use cleaning paper moistened with the

liquid.

x On adjustment of the LCD screen

(CALIBRATION)

The buttons on the touch panel may not

work correctly. If this happens, follow the

procedure below. It is recommended you

connect your camcorder or the Handycam

Station (supplied with DCR-HC46/HC96)

to the wall outlet using the supplied AC

Adaptor during the operation.

1 Slide the POWER switch repeatedly to turn

on the PLAY/EDIT lamp.

2 Disconnect cables other than that of the AC

Adaptor from your camcorder or the

Handycam Station (supplied with DCR-

HC46/HC96), then eject the cassette and

“Memory Stick Duo” from your

camcorder.

3 Touch t [MENU] t

(STANDARD SET) t [CALIBRATION]

t .

• For DCR-HC46/HC96:

The screen changes to 16:9 ratio when using

4:3 ratio.

4 Touch the “×” displayed on the screen with

the corner of the “Memory Stick Duo” or

the like.

The position of the “×” changes.

To cancel [CALIBRATION], touch

[CANCEL] in step 4.

If you did not press the right spot, start from

step

4 again.

• You cannot calibrate the LCD screen if it is

rotated.

On handling the casing

• If the casing is soiled, clean the camcorder body

with a soft cloth lightly moistened with water,

and then wipe the casing with a dry soft cloth.

• Avoid the following to avoid damage to the

finish.

– Using chemicals such as thinner, benzine,

alcohol, chemical cloths, repellent, insecticide

and sunscreen.

– Handling with above substances on your

hands.

– Leaving the casing in contact with rubber or

vinyl objects for a long period of time.

About care and storage of the lens

• Wipe the surface of the lens clean with a soft

cloth in the following instances:

– When there are fingerprints on the lens

surface.

– In hot or humid locations

– When the lens is exposed to salty air such as

at the seaside.

• Store in a well-ventilated location subject to

little dirt or dust.

• To prevent mold, periodically clean the lens as

described above. It is recommended that you

operate your camcorder about once a month to

keep it in optimum state for a long time.

CALIBRATION

Touch the "x"

1/3

CANCEL

Maintenance and precautions (Continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DCR-HC96E Seite 130

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DCR-HC96E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info