291181
65
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
Dubbing/Editing
Dubbing/Editing
65
Insert a cassette for recording.
Set the input selector to input mode if your
VCR has one.
3 Prepare your camcorder (playing
device).
Insert a cassette for editing.
Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
4 Touch to display [PAGE1].
5 Touch MENU.
6 Select (OTHERS), then select
[VIDEO EDIT] with / ,
then touch [EXEC].
7 Touch [EDIT SET].
8 Select [CONTROL] with / ,
then touch [EXEC].
9 Select i.LINK or [IR].
When connecting with an i.LINK
cable
Select i.LINK with / , then
[EXEC]. Go on to “Step 2: Adjusting the
synchronization of the VCR” (p. 66).
When connecting with an A/V
connecting cable
Select [IR] with / , then
[EXEC]. Follow the procedure described in
“To set the [IR SETUP] code” (p. 65).
To set the [IR SETUP] code
When you connect with an A/V connecting
cable, you need to check the [IR SETUP] code
signal to see if your VCR can be operated by
your camcorder (infrared ray emitter).
1 Select [IR SETUP] with / ,
then touch [EXEC].
2 Select the [IR SETUP] code of your VCR
with
/ , then touch [EXEC].
For the [IR SETUP] code of your VCR,
refer to “[IR SETUP] code list” (p. 66).
When there is more than 1 code listed for
the manufacturer of your VCR, try each
code and find the most appropriate one.
3 Select [PAUSEMODE] with /
, then touch [EXEC].
4 Touch / to select the mode to
cancel the recording pause on your VCR,
then touch [EXEC].
Refer to the operating instructions supplied
with your VCR for details on operation.
5 Point the infrared ray emitter of your
camcorder towards the remote sensor on
your VCR, from about 30 cm (12 in.)
away, with no obstructions.
6 Insert a cassette into your VCR, and set
the VCR to recording pause.
7 Select [IR TEST] with / ,
then touch [EXEC].
V IDEO ED I T
ED I T SET
CONTROL
ADJ TEST
”CUT
-
I
N”
”CUT
-OUT”
I
R SETUP
PAUSEMODE
I
R TEST
END
I
R
EXEC
RET.
V IDEO ED I T
ED I T SET
CONTROL
ADJ TEST
”CUT
-
I
N”
”CUT
-OUT”
I
R SETUP
PAUSEMODE
I
R TEST
I
R
i. L
I
NK
END
EXEC
RET.
Infrared ray emitter
VCR
Remote sensor
,continued
65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony dcr-pc 107 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony dcr-pc 107

Sony dcr-pc 107 Bedienungsanleitung - Deutsch, Holländisch - 216 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info