Bedienungsanleitung Sony dcr-pc 107 (Seite 77 von 104) (Englisch)

291181

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Troubleshooting

Dubbing/Editing

No sound or only a low sound is

heard.

cSet [HiFi SOUND] to [STEREO] in the (PLAYER SET) menu for

DCR-PC106E, or in the (VCR SET) menu for DCR-PC107E.

(p. 50)

cTurn up the volume. (p. 35)

cOn the (PLAYER SET) menu for DCR-PC106E, or on the

(VCR SET) menu for DCR-PC107E, adjust [AUDIO MIX] from the

[ST2] (additional sound) side until the sound is heard appropriately.

(p. 50)

cWhen you are using an S video plug, make sure the red and white plugs

of the A/V connecting cable are connected as well. (p. 40)

The sound breaks off. cClean the head using the cleaning cassette (optional). (p. 88)

Cannot perform Date search with the

recording date displayed on the

screen.

cUse a cassette with Cassette Memory. (p. 83)

cSet [CM SEARCH] to [ON] in the (CM SET) menu. (p. 54)

• There is a blank section in the beginning or middle of the tape. This is

not a malfunction.

“---” is displayed on the screen. • The tape you are playing was recorded without setting the date and time.

• A blank section on the tape is being played.

• The data code on a tape with a scratch or noise cannot be read.

The END SEARCH function does not

work.

• The cassette was ejected after recording when using a cassette without

Cassette Memory. (p. 83)

• The cassette is new and has nothing recorded.

The END SEARCH function does not

work correctly.

• There is a blank section in the beginning or middle of the tape. This is

not a malfunction.

Noises appear and is displayed

on the screen.

• The tape was recorded in a TV color system other than that of your

camcorder. This is not a malfunction. (p. 83)

Symptom Cause and/or Corrective Actions

Cannot dub correctly using the A/V

connecting cable.

cMake sure your camcorder is connected correctly to the input jack of the

other device via the A/V connecting cable.

cSet [DISPLAY] to [LCD] in the (OTHERS) menu. (p. 61)

For DCR-PC107E:

Pictures from connected devices are

not displayed correctly.

• The input signal is not sent correctly except from the PAL system-based

device.

New sound added to a recorded tape

is not heard.

cIn the (PLAYER SET) menu for DCR-PC106E, or in the

(VCR SET) menu for DCR-PC107E, adjust [AUDIO MIX] from the

[ST1] (original sound) side until the sound is heard appropriately. (p. 50)

A title is not recorded/A cassette label

is not recorded.

cUse a cassette with Cassette Memory. (p. 83)

cErase unnecessary titles when the Cassette Memory is full. (p. 53)

cSet the write-protect tab to REC. (p. 84)

• A title cannot be added to a blank section of the tape.

The title is not displayed. cSet [TITLE DSPL] to [ON] in the (CM SET) menu. (p. 53)

• During Easy Handycam operation, the title is not displayed.

Symptom Cause and/or Corrective Actions

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dcr-pc 107 Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dcr-pc 107

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info