Bedienungsanleitung Sony DCR-SR33E (Seite 115 von 131) (Englisch)

107450

115

Zoom out

Zoom in

Vorherige Seite

1/131

Nächste Seite

115

Additional Information

x How to prevent moisture condensation

When you bring your camcorder from a

cold place into a warm place, put your

camcorder in a plastic bag and seal it

tightly. Remove the bag when the air

temperature inside the plastic bag has

reached the surrounding temperature (after

about 1 hour).

LCD screen

• Do not exert excessive pressure on the LCD

screen, as it may cause damage.

• If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

• While using your camcorder, the back of the

LCD screen may heat up. This is not a

malfunction.

x To clean the LCD screen

If fingerprints or dust make the LCD screen

dirty, it is recommended you use a soft

cloth to clean it. When you use the LCD

Cleaning Kit (optional), do not apply the

cleaning liquid directly to the LCD screen.

Use cleaning paper moistened with the

liquid.

x On adjustment of the touch panel

(CALIBRATION)

The buttons on the touch panel may not

work correctly. If this happens, follow the

procedure below. It is recommended that

you connect your camcorder to the wall

socket using the supplied AC Adaptor

during the operation.

1 Turn on your camcorder, then press

(HOME).

2 Touch (SETTINGS) t [GENERAL

SET] t [CALIBRATION].

3 Touch “×” displayed on the screen with the

corner of the “Memory Stick Duo” or the

like. The position of “×” changes.

Touch [CANCEL] to cancel.

If you did not press the right spot, try the

calibration again.

b Notes

• Do not use a sharp-pointed object for

calibration. Doing so may damage the LCD

screen.

• You cannot calibrate the LCD screen if it is

rotated, or closed with the screen facing out.

On handling the casing

• If the casing is soiled, clean the camcorder body

with a soft cloth lightly moistened with water,

and then wipe the casing with a dry soft cloth.

• Avoid the following to avoid damage to the

finish:

– Using chemicals such as thinner, benzine,

alcohol, chemical cloths, repellent, insecticide

and sunscreen.

– Handling the camcorder with above

substances on your hands.

– Leaving the casing in contact with rubber or

vinyl objects for a long period of time.

About care and storage of the lens

• Wipe the surface of the lens clean with a soft

cloth in the following instances:

– When there are fingerprints on the lens

surface.

– In hot or humid locations

– When the lens is exposed to salty air such as

at the seaside.

• Store in a well-ventilated location subject to

little dirt or dust.

• To prevent mold, periodically clean the lens as

described above. It is recommended that you

operate your camcorder about once a month to

keep it in optimum state for a long time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DCR-SR33E Seite 115

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DCR-SR33E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info