Bedienungsanleitung Sony DCR-SR36E (Seite 5 von 36) (Englisch)

106531

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

terminal and may result in a malfunction of

your camcorder.



Do not apply shock or vibration to your

camcorder. e hard disk of the camcorder may

not be recognized, or recording or playback

may not be possible.



Do not use your camcorder in very loud areas.

e hard disk of the camcorder may not be

recognized, or recording may not be possible.



To protect the internal hard disk from shock

by dropping, the camcorder has drop sensor

function*. When a drop occurs, or under a non-

gravity condition, the block noise made when

this function is activated by the camcorder may

also be recorded. If the drop sensor catches a

drop repeatedly, recording/play back may be

stopped.



When the temperature of the camcorder

becomes extremely high or extremely low, you

may not be able to record or play back on the

camcorder, due to the protection features of the

camcorder being activated in such situations.

In this case, an indicator appears on the LCD

screen (p.

29).



Do not turn on the camcorder in a low-pressure

area, where the altitude is more than 3,000

meters (9,800 feet). Doing so may damage the

hard disk drive of your camcorder.



If you repeat recording/deleting images for a

long time, fragmentation of data occurs on the

media. Images cannot be saved or recorded. In

such a case, save your images on some type of

external media rst, and then perform [MEDIA

FORMAT]*.



Fasten the grip belt and hold your camcorder

correctly while recording.



To adjust the LCD panel, open the LCD panel

90 degrees to the camcorder (), then rotate it

to the best angle to record or play ().

You can rotate the LCD panel 180 degrees to

the lens side () to record in mirror mode.



e LCD screen is manufactured using

extremely high-precision technology, so over

99.99% of the pixels are operational for eective

use. However, there may be some tiny black

points and/or bright points (white, red, blue,

or green in color) that appear constantly on the

LCD screen. ese points are normal results of

the manufacturing process and do not aect the

recording in any way.



Remove the insulation sheet before using the

Remote Commander.

(DCR-SR55E/SR65E/SR75E/SR85E)

Types of “Memory Stick” you can use

with your camcorder



For recording movies, it is recommended that

you use a “Memory Stick PRO Duo” of 512 MB

or larger marked with:



(“Memory Stick

PRO Duo”)*



(“Memory Stick

PRO-HG Duo”)

* Marked with Mark2 or not are available.



A “Memory Stick PRO Duo” of up to 8 GB has

been conrmed to operate correctly with this

camcorder.



See page 12 for the recordable time of a

“Memory Stick PRO Duo.”



“Memory Stick PRO Duo” and “Memory Stick

PRO-HG Duo” are both called as “Memory

Stick PRO Duo” in this manual.

Insulation sheet

90 degrees to the

camcorder

90 degrees (max.)

180 degrees (max.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DCR-SR36E Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DCR-SR36E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info