107454
24
Zoom out
Zoom in
Vorherige Seite
1/131
Nächste Seite
3-093-316-13(1)
Digital Video Camera Recorder
Handycam Handbook
DCR-SR32E/SR33E/SR42E/
SR52E/SR62E/SR72E/
SR82E/SR190E/SR200E/
SR290E/SR300E
© 2007 Sony Corporation
Enjoying your
camcorder
8
Getting Started
12
Recording/
Playback
20
Editing
38
Customizing your
camcorder
52
Performing with
a computer
73
Troubleshooting
94
Additional Information
108
Utilizing recording
media
49
Quick Reference
118
2
Read this before operating your camcorder
Before operating the unit, please read this
Handbook thoroughly, and retain it for
future reference.
Your camcorder is supplied with two
kinds of operations guides.
For operating and handling the camcorder,
refer to “Operating Guide” and “Handycam
Handbook” (PDF/this Handbook).
Types of “Memory Stick” you can use
in your camcorder
You can use “Memory Stick Duo” marked
with or
(p. 111).
“Memory Stick Duo”
(This size can be used with your
camcorder.)
“Memory Stick
(You cannot use it in your camcorder.)
• You cannot use any type of memory card
except “Memory Stick Duo.”
“Memory Stick PRO” and “Memory Stick
PRO Duo” can be used only with
“Memory Stick PRO” compatible
equipment.
• Do not attach a label or the like on a
“Memory Stick Duo” or a Memory Stick
Duo Adaptor.
When using a “Memory Stick Duo”
with “Memory Stick” compatible
equipment
Be sure to insert the “Memory Stick Duo”
into the Memory Stick Duo Adaptor.
Memory Stick Duo Adaptor
On using the camcorder
Do not hold the camcorder by the
following parts.
The camcorder is not dustproofed,
dripproofed or waterproofed. See “About
handling of your camcorder” (p. 114).
To prevent the hard disk from being
broken or recorded images from being
lost, do not do the following when either
of the respective lamps of the POWER
switch (p. 17) or the access lamp (p. 23,
27) is on:
to remove the battery pack or AC
Adaptor from the camcorder.
– to apply mechanical shock or vibration to
the camcorder.
Before connecting your camcorder to
another device with a USB cable etc., be
sure to insert the connector plug in the
proper direction. If you insert the
connector plug forcibly in the wrong
direction, the terminal may be damaged,
or this may cause a malfunction of your
camcorder.
Disconnect the AC Adaptor from the
Handycam Station holding both the
camcorder and the DC plug.
Be sure to turn the POWER switch to
OFF (CHG), when you set the camcorder
onto the Handycam Station or remove the
camcorder from it.
Notes on use
LCD screen Battery
3
About menu items, LCD panel and lens
A menu item that is grayed out is not
available under the current recording or
playback conditions.
The LCD screen is manufactured using
extremely high-precision technology, so
over 99.99% of the pixels are operational
for effective use. However, there may be
some tiny black points and/or bright
points (white, red, blue, or green in color)
that appear constantly on the LCD screen.
These points are normal results of the
manufacturing process and do not affect
the recording in any way.
Exposing the LCD screen or the lens to
direct sunlight for long periods of time
may cause malfunctions.
Do not aim at the sun. Doing so might
cause your camcorder to malfunction.
Take images of the sun only in low light
conditions, such as at dusk.
On recording
Before starting to record, test the
recording function to make sure the image
and sound are recorded without any
problems.
Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder,
recording media, etc.
TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need a PAL
system-based TV.
Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
You cannot play back both movies and
still images other than the images
recorded with your camcorder. You also
cannot play back images recorded with
other DCR-SR32E/SR33E/SR42E/
SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E.
About language setting
The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
necessary (p. 18).
About this Handbook
The LCD screens and indicators shown in
this Handbook were taken with a digital
still camera, and may look different from
what you actually see.
Design and specifications of recording
media and other accessories are subject to
change without notice.
Unless otherwise specially indicated,
illustrations in this Handbook are based
on DCR-SR300E.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens.
Also, the lens for DCR-SR190E/SR200E/
SR290E/SR300E is T -coated to suppress
unwanted reflections, then faithfully
reproduce colors.
MTF = Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
Black point
White, red, blue or
green point
4
Notes on using the Hard Disk Drive Handycam
Save all your recorded image data
To prevent your image data from being lost,
save all your recorded images on external
media. It is recommended that you save the
image data on a disc such as DVD-R using your
computer (p. 77). Also, you can save your
image data using a VCR, or a DVD/HDD
recorder (p. 45).
It is recommended that you save your image
data periodically, after recording.
Do not apply shock or vibration to your
camcorder
The hard disk of the camcorder may not be
recognized, or recording or playback may not be
possible.
Especially, during recording/playback, do not
apply shock. After recording, do not apply
vibration or shock to the camcorder, while the
ACCESS lamp is lit.
When using the shoulder belt (not supplied), do
not crash the camera against an object.
On the drop sensor
To protect the internal hard disk from the shock
by dropping, the camcorder has the drop sensor
function (p. 64). When a drop occurs, or under a
non-gravity condition, the block noise to protect
the camcorder may also be recorded. If the drop
sensor catches a drop repeatedly, recording/
playback may be stopped.
Notes on battery pack/AC Adaptor
While the ACCESS lamp is lit, be sure to avoid
the following. They may cause malfunctions.
Removing the battery pack
Removing the AC Adaptor (while charging
the battery pack using the AC Adaptor)
Be sure to remove the battery pack or the AC
Adaptor after turning off the POWER switch.
Note on operating temperatures
When the temperature of the camcorder
becomes extremely high or extremely low, you
may not be able to record or play back on the
camcorder, due to the protection features of the
camcorder being activated in such situations. In
this case, a message appears on the LCD screen
(p. 104).
When the camcorder is connected to a
computer
Do not try to format the hard disk of the
camcorder using a computer. If you do so, your
camcorder may not operate correctly.
Note on using the camcorder at high
altitudes
Do not turn on the camcorder in a low-pressure
area, where the altitude is more than 3,000
meters (9,800 feet). Doing so may damage the
hard disk drive of your camcorder.
Note on disposal/transfer
If you perform [ FORMAT] (p.49) or
formatting the hard disk of the camcorder, you
may not delete data from the hard disk
completely. When you transfer the camcorder, it
is recommended that you perform
[ EMPTY] (p.51) to prevent the recovery of
your data.
In addition to the above, when you dispose of
the camcorder, it is recommended that you
destroy the actual body of the camcorder.
If you cannot record/play back
images, perform [ FORMAT]
If you repeat recording/deleting images for a
long time, fragmentation of data occurs on the
hard disk. Images cannot be saved or recorded.
In such a case, save your images on some type
of external media first (p. 37), and then perform
[ FORMAT] (p. 49).
Fragmentation 1 Glossary (p. 127)
5
Table of Contents
Read this before operating your
camcorder .......................................2
Notes on using the Hard Disk Drive
Handycam ......................................4
Subject examples and solutions .....7
Operation flow ................................8
HOME” and OPTION”
- Taking advantage of two types of
menus .............................................9
Step 1: Checking supplied
items ...................................12
Step 2: Charging the battery
pack ....................................13
Step 3: Turning the power on, and
setting the date and time ....17
Changing the language
setting ....................................... 18
Step 4: Preparing for recording ....19
Recording and playback with ease
(Easy Handycam operation) .........20
Recording .....................................23
Zooming .................................... 25
Recording sound with more
presence (5.1ch surround
recording) (DCR-SR190E/SR200E/
SR290E/SR300E) ...................... 25
Using the flash (DCR-SR190E/
SR200E/SR290E/SR300E) ........ 26
Capturing high quality still images
during movie recording (Dual Rec)
(DCR-SR190E/SR200E/SR290E/
SR300E) .................................... 26
Recording still images on a
“Memory Stick Duo” .................. 27
Recording in dark places
(NightShot plus/NightShot) ....... 27
Adjusting the exposure for backlit
subjects ..................................... 28
Recording in mirror mode ......... 28
Selecting the aspect ratio (16:9 or
4:3) of the recording image ...... 28
Recording the fast action in
slow-motion (SMTH SLW REC)
(DCR-SR190E/SR200E/SR290E/
SR300E) .................................... 29
Playback .......................................31
Using PB zoom ......................... 33
Searching for desired images by
date (Date Index) ...................... 33
Playing back a series of still images
(Slide show) .............................. 34
Playing the image on a TV ............35
Saving images ..............................37
(OTHERS) category .................38
Deleting images ............................38
Dividing a movie ...........................40
Copying still images ......................41
Creating the Playlist ......................42
Dubbing to VCR or DVD/HDD
recorders .......................................45
Printing recorded images (PictBridge
compliant printer) ..........................46
(MANAGE HDD/MEMORY)
category ........................................49
Formatting the hard disk or the
“Memory Stick Duo” ......................49
Checking the hard disk
information ....................................50
Preventing data on the hard disk of
the camcorder from being
recovered ......................................51
Enjoying your camcorder
Getting Started
Recording/Playback
Editing
Utilizing recording media
6
What you can do with the
(SETTINGS) category of the
HOME MENU ............................... 52
Using the HOME MENU ............ 52
List of the (SETTINGS) category
items .......................................... 53
MOVIE SETTINGS ....................... 54
(Items for recording movies)
PHOTO SETTINGS ..................... 57
(Items for recording still images)
VIEW IMAGES SET ..................... 60
(Items to customize the display)
SOUND/DISP SET ....................... 61
(Items to adjust beep and the
screen)
OUTPUT SETTINGS ................... 62
(Items for when connecting other
devices)
CLOCK/ LANG .......................... 63
(Items to set clock and language)
GENERAL SET ............................ 64
(Other setup items)
Activating functions using the
OPTION MENU ....................... 65
Using the OPTION MENU ......... 65
Recording items on the OPTION
MENU ........................................ 66
Viewing items on the OPTION
MENU ........................................ 66
Functions set in
the OPTION MENU ...................... 67
What you can do with Windows
computer ...................................... 73
System requirements ................... 74
Installing the software .................. 75
Creating a DVD with One Touch
...................................................... 77
Importing images to a computer ... 81
Deleting images recorded on the
camcorder through the computer
(DCR-SR42E/SR62E/SR82E/
SR200E/SR300E) ........................ 85
Viewing images imported to a
computer ...................................... 86
Editing the imported images ......... 88
Creating and copying a DVD ........ 90
Manipulating still images .............. 93
Troubleshooting ............................ 94
Warning indicators and
messages ................................... 104
Using your camcorder abroad .... 108
Files on the camcorder hard disk/
folder structure ........................... 110
Maintenance and precautions .... 111
Identifying parts and controls ..... 118
Indicators displayed during
recording/playback ..................... 123
Glossary ..................................... 127
Index ...........................................128
Customizing your camcorder
Performing with a computer
Troubleshooting
Additional Information
Quick Reference
7
Subject examples and solutions
* DCR-SR190E/SR200E/SR290E/SR300E
** DCR-SR32E/SR33E/SR42E/SR52E/SR62E/SR72E/SR82E
Checking your golf
swing
Getting a good
shot of a ski slope
or beach
B SMTH SLW REC* ......................29
B SPORTS** ............................... 69
B Backlight ...................................28
B BEACH.......................................69
B SNOW .......................................69
Capturing still
images during
movie recording
A child on the
stage under a spot
light
B Dual Rec*..................................26 B SPOTLIGHT...............................69
Flowers in close-
up
Fireworks with all
its splendor
B PORTRAIT .................................69
B FOCUS.......................................67
B TELE MACRO.............................67
B FIREWORKS..............................69
B FOCUS.......................................67
Focusing on the
dog on the left
side of the screen
A sleeping child
under dim light
B FOCUS.......................................67
B SPOT FOCUS.............................67
B NightShot plus** ......................27
B NightShot*................................27
B COLOR SLOW SHTR .................70
8
Enjoying your camcorder
Operation flow
B Get ready (p. 12).
B Shoot using your camcorder (p. 23).
Movies are recorded on the hard disk, and still images are
recorded on either the hard disk or a “Memory Stick Duo.”
B Play back the images.
x Viewing on the LCD screen of your camcorder (p. 31)
x Viewing on the TV connected to your camcorder
(p. 35)
B Save recorded images.
x Saving images on a DVD using a computer (p. 77)
x Importing images to a computer (p. 81)
x Dubbing images on VCR or DVD/HDD recorders (p. 45)
B Delete images.
If the hard disk of your camcorder is full, you cannot
record new images. Delete the image data that has been
saved on your camcorder. If you delete the images, you can
record new images on the free hard disk space again.
x Deleting the selected images (p. 38)
x Deleting all the images ([ FORMAT], p. 49)
9
Enjoying your camcorder
Enjoying your camcorder
HOME” and “ OPTION
- Taking advantage of two types of menus
B Categories and items of the HOME MENU
(CAMERA) category
(VIEW IMAGES) category
(OTHERS) category
(MANAGE HDD/MEMORY) category
(SETTINGS) category
To customize your camcorder (p. 52)*.
* You can also set these items during Easy
Handycam operation (p. 20). For the items
available in the (SETTINGS) category, see
page 53.
**DCR-SR190E/SR200E/SR290E/SR300E
HOME MENU” - the starting point for operations with your
camcorder
(HELP)
Displays a description of the item (p. 10)
Category
Item Page
MOVIE* 24
PHOTO* 24
SMTH SLW REC** 29
Item Page
VISUAL INDEX* 31
PLAYLIST 42
Item Page
DELETE* 38
EDIT 40, 41
PLAYLIST EDIT 42
PRINT 46
COMPUTER 73
Item Page
FORMAT* 49
FORMAT* 50
INFO 50
10
1 While pressing the green button
in the center, turn the POWER
switch in the direction of the
arrow to turn on the power.
2 Press (HOME) A (or B).
3 Touch the desired category.
Example: (OTHERS) category
4 Touch the desired item.
Example: [EDIT]
5 Follow the guide on the screen for
further operation.
To hide the HOME MENU screen
Touch .
B When you want to know something
about the function of each item on
the HOME MENU - HELP
1 Press (HOME).
The HOME MENU appears.
2 Touch (HELP).
The bottom of the (HELP) button
turns orange.
Using the HOME MENU
(HOME) A
(HOME) B
11
Enjoying your camcorder
3 Touch the item you want to know
the content.
When you touch an item, its explanation
appears on the screen.
To apply the option, touch [YES],
otherwise, touch [NO].
To deactivate the HELP
Touch (HELP) again in step 2.
Just a touch on the screen during shooting
or playback displays the functions available
at that moment. You will find it easy to
make various settings. See page 65 for
further details.
Using the OPTION MENU
(OPTION)
12
Getting Started
Step 1: Checking supplied items
Make sure that you have the following
items supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
AC Adaptor (1) (p. 13)
Mains lead (1) (p. 13)
Handycam Station (1) (p. 13)
A/V connecting cable (1) (p. 35, 45)
USB cable (1) (p. 46, 78, 81)
Wireless Remote Commander (1) (p. 122)
(except for DCR-SR32E/SR33E/SR42E)
A button-type lithium battery is already installed.
Rechargeable battery pack
NP-FH40 (1) (p. 13, 112) (DCR-SR32E/
SR33E/SR42E/SR52E/SR62E/SR72E/
SR82E)
NP-FH60 (1) (p. 13, 112) (DCR-SR190E/
SR200E/SR290E/SR300E)
21-pin adaptor (p. 36)
For the model with the mark printed on their
bottom surfaces only.
CD-ROM “Handycam Application
Software” (1) (p. 73)
Picture Motion Browser (Software)
Handycam Handbook (This Handbook)
Operating Guide (1)
13
Getting Started
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 112) after
attaching it to your camcorder.
b Notes
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1 Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
2 Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (The default setting).
3 Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
4 Connect the mains lead to the AC
Adaptor and the wall socket.
5 Set the camcorder onto the
Handycam Station securely.
The CHG (charge) lamp lights up and
charging starts.
The CHG (charge) lamp turns off when
the battery pack is fully charged.
When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
1
2
3
4
5
5
POWER
switch
DC IN jack
DC plug
AC Adaptor
Mains lead
To the wall socket
CHG
(charge)
lamp
Battery
14
To charge the battery pack using only
the AC Adaptor
Turn the POWER switch to OFF (CHG),
then connect the AC Adaptor directly to the
DC IN jack on the camcorder.
b Notes
Disconnect the AC Adaptor from the DC IN
jack holding both the camcorder and the DC
plug.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery) release lever and
remove the battery pack.
b Notes
When you remove the battery pack or the AC
Adaptor, make sure that the (Movie) lamp/
(Still) lamp (p. 23) is turned off.
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (see page 113 for the
details of storage).
To use an outside power source
Make the same connections as you do when
charging the battery pack. The battery pack
will not lose its charge in this case.
To check the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO.
After a while, the approximate recordable
time and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
pressing DISP/BATT INFO again while the
information is displayed.
POWER switch
DC IN jack
CHG (charge)
lamp
DC plug
Battery pack
AC Adaptor
To the wall socket
Open the
jack cover
Mains lead
BATT (battery)
release lever
15
Getting Started
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
* DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
** DCR-SR190E/SR200E/SR290E/SR300E
Recording time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR32E/SR33E/SR42E:
DCR-SR52E/SR62E/SR72E/SR82E:
DCR-SR190E/SR200E:
DCR-SR290E/SR300E:
Battery pack Charging time
NP-FH40
(supplied*)
125
NP-FH50 135
NP-FH60
(supplied**)
135
NP-FH70 170
NP-FH100 390
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
105 50
NP-FH50 125 60
NP-FH70 270 135
NP-FH100 615 305
Remaining battery (approx.)
Recording capacity (approx.)
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH40
(supplied)
90 45
100 50
NP-FH50 105 50
115 55
NP-FH70 230 115
245 120
NP-FH100 525 260
565 280
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50 85 40
90 45
NP-FH60
(supplied)
115 55
125 60
NP-FH70 190 95
200 100
NP-FH100 440 220
465 230
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50 75 35
80 40
NP-FH60
(supplied)
100 50
105 50
NP-FH70 160 80
170 85
NP-FH100 375 185
395 195
16
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b Notes
All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Bottom: When the LCD backlight turns off
(except for DCR-SR32E/SR33E/SR42E).
Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR32E/SR33E/SR42E:
DCR-SR52E/SR62E/SR72E/SR82E:
DCR-SR190E/SR200E:
DCR-SR290E/SR300E:
* When the LCD backlight is on.
On the battery pack
Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/ (Still) lamp (p. 23).
The CHG (charge) lamp flashes during
charging, or Battery Info (p. 14) will not be
correctly displayed under the following
conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is worn-out (For Battery
Info only).
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station, even when the mains lead is
disconnected from the wall socket.
When attaching an optional video light, it is
recommended that you use an NP-FH70/FH100
battery pack (except for DCR-SR32E/SR33E/
SR42E).
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Battery pack Playback time
NP-FH40
(supplied)
120
NP-FH50 140
NP-FH70 300
NP-FH100 695
Battery pack Playback time*
NP-FH40
(supplied)
110
NP-FH50 130
NP-FH70 280
NP-FH100 635
Battery pack Playback time*
NP-FH50 125
NP-FH60
(supplied)
165
NP-FH70 270
NP-FH100 615
Battery pack Playback time*
NP-FH50 120
NP-FH60
(supplied)
160
NP-FH70 255
NP-FH100 590
17
Getting Started
On the AC Adaptor
Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
wall socket immediately if any malfunction
occurs while using your camcorder.
Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall socket via the AC Adaptor.
Step 3: Turning the
power on, and setting
the date and time
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
1 While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
The [CLOCK SET] screen appears.
2 Select the desired geographical
area with v/V, then touch [NEXT].
POWER switch
Lens cover
Touch the button on
the LCD screen.
18
3 Set [SUMMERTIME], then touch
[NEXT].
4 Set [Y] (year) with v/V.
5 Select [M] with b/B, then set the
month with v/V.
6 Set [D] (day), hour and minute in
the same way, then touch [NEXT].
7 Make sure that the clock is
correctly set, then touch .
The clock starts.
You can set any year up to the year
2037.
To turn off the power
Turn the POWER switch to OFF (CHG).
To reset the date and time
Touch (HOME) t (SETTINGS)
t [CLOCK/ LANG] t [CLOCK
SET], and set the date and time.
b Notes
If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the built-in rechargeable battery and then
set the date and time again (p. 116).
It takes a few seconds for your camcorder to be
ready to shoot after the power is turned on. You
cannot operate your camcorder during this time.
The lens cover opens automatically when the
power is turned on (DCR-SR190E/SR200E/
SR290E/SR300E). It closes when the playback
screen is selected, or the power is turned off.
In the setting at the time of purchase, the power
turns off automatically if you leave your
camcorder without any operation attempted for
approximately 5 minutes, to save battery power
([A.SHUT OFF], p. 64).
z Tips
The date and time does not appear during
recording, but they are automatically recorded
on the hard disk, and can be displayed during
playback ([DATA CODE], p. 60).
Refer to page 109 for information concerning
“World time difference.”
If the buttons on the touch panel do not work
correctly, adjust the touch panel
(CALIBRATION) (p. 115).
You can change the on-screen displays to
show messages in a specified language.
Touch (HOME) t (SETTINGS)
t [CLOCK/ LANG] t
[ LANGUAGE SET], then select the
desired language.
Changing the language setting
19
Getting Started
Step 4: Preparing for recording
Slide the lens cover switch to open.
z Tips
When you finish recording or when you
playback images, close the lens cover.
For DCR-SR190E/SR200E/SR290E/SR300E,
the lens cover opens and closes automatically.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it to the best
angle to record or play (2).
To turn off the LCD backlight to make
the battery last longer (except for
DCR-SR32E/SR33E/SR42E)
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
image will not be affected by the setting. To
turn on the LCD backlight, press and hold
DISP/BATT INFO for a few seconds until
disappears.
b Notes
Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
z Tips
If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
Touch (HOME) t (SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
(p. 61), and adjust the brightness of the LCD
screen.
The information is displayed or hidden (display
y no display) each time you press DISP/
BATT INFO.
Fasten the grip belt and hold your
camcorder correctly.
Opening the lens cover
manually (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/
SR82E)
Adjusting the LCD panel
Lens cover switch
190 degrees to the
camcorder
2180 degrees
(max.)
290 degrees
(max.)
DISP/BATT INFO
Fastening the grip belt
20
Recording/Playback
Recording and playback with ease
(Easy Handycam operation)
Easy Handycam operation makes nearly all settings automatic so that you can perform
recording or playback operation without detailed settings. It also makes screen font size larger
for easy viewing.
1 Turn the POWER
switch G until the
(Movie) lamp lights up.
2 Press EASY A.
3 Press START/STOP H (or E) to
start recording.*
To stop recording, press START/STOP
again.
Still images are recorded on the hard disk in
the default setting. You can change the
recording media of still images to a
“Memory Stick Duo” (p. 27).
1 Turn the POWER
switch G until the
(Still) lamp lights up.
2 Press EASY A .
3
Press PHOTO F lightly to adjust
the focus
A
(a beep sounds), then
press it fully
B
(a shutter click
sounds).**
* The setting of [REC MODE] is fixed to [SP] (p. 54).
** The setting of [ QUALITY] is fixed to [FINE] (p. 58).
Open the lens cover (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/SR82E) (p. 19)
If the POWER switch is set to OFF (CHG),
turn it while pressing the green button.
Recording movies
appears on
the LCD screen.
[STBY] b [REC]
Recording still images
appears on
the LCD screen.
Flashing b Lights up
21
Recording/Playback
1 Turn the POWER switch G to turn on your camcorder.
2 Press (VIEW IMAGES) I (or D) button
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to
display the thumbnails.)
1 :Displays movies.
2 :Displays still images on the hard disk.
3 :Displays still images on a “Memory Stick Duo.”
3 Start playback.
Movies:
Touch the tab and the movie to be played back.
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 60).
Playing back recorded movies/still images
Returns to the
recording screen
Previous 6 images
Next 6 images
Returns to the
recording screen
Appears with the image on each of the tab that was lastly played back/
recorded (B for the still image).
Searches for images
by date (p. 33)
Stop (go to the
VISUAL INDEX
screen)
Beginning of the
movie/previous
movie
Return (to the
VISUAL INDEX
screen)
Toggles Play or Pause as you touch
Next movie
Reverse/ Forward
The recording
date/time*
22
z Tips
When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX
screen.
You can slow down the playback speed by touching / during pause.
You can adjust volume by selecting (HOME) t (SETTINGS) t [SOUND SETTINGS] t
[VOLUME], then with / .
Still images:
Touch the , or tab and the still image to be played back.
* The setting of [DATA CODE] is fixed to [DATE/TIME] (p. 60).
To cancel Easy Handycam operation
Press EASY A again. disappears
from the LCD screen.
Menu settings during Easy Handycam
operation
Press (HOME) C (or B) to display
the menu items available for setup changes
(p. 9, 53).
b Notes
Most of the menu items automatically return to
the default settings. The settings of some menu
items are fixed. For details, see page 95.
You cannot use (OPTION) menu.
Cancel Easy Handycam operation if you want to
add effects to images or change settings.
Invalid buttons during Easy Handycam
operation
You cannot use some buttons/functions
during Easy Handycam operation since
they are automatically set (p. 95). If you set
an invalid operation, [Invalid during Easy
Handycam operation] may appears.
Go to the VISUAL
INDEX screen
Return (to the
VISUAL INDEX
screen)
Slideshow (p. 34)
The recording
date/time*
Previous/Next
23
Recording/Playback
Recording/Playback
Recording
b Notes
If the ACCESS lamp is lit or flashing after
recording is finished, it means data is still being
written onto the hard disk or “Memory Stick
Duo.” Do not apply shock or vibration to your
camcorder, and do not remove the battery or AC
Adaptor.
The maximum continuous recordable time is
approximately 13 hours.
When a movie file exceeds 2 GB, the next
movie file is created automatically.
z Tips
You can check the free hard disk space by
touching (HOME) t (MANAGE
HDD/MEMORY) t [ INFO] (p. 50).
POWER switch A
PHOTO F
(HOME) D
START/STOP C
START/STOP B
Lens cover
Open the lens cover before
recording (DCR-SR32E/
SR33E/SR42E/SR52E/
SR62E/SR72E/SR82E) (p. 19)
(HOME) E
ACCESS lamp
(Hard disk)
(Movie) lamp /
(Still) lamp
24
You can record movies on the hard disk of
your camcorder. For the recordable time,
see page 54.
1 Turn the POWER switch A until
the (Movie) lamp lights up.
2 Press START/STOP B (or C).
To stop recording, press START/STOP
again.
You can record still images on the hard disk
of your camcorder in the default setting. To
record still images on a “Memory Stick
Duo,” change the recording media. For the
number of recordable still images, see
page 57.
1 Turn the POWER switch A until
the (Still) lamp lights up.
2 Press PHOTO F lightly to adjust
the focus A (a beep sounds),
then press it fully B (a shutter
click sounds).
When disappears, the image has
been recorded.
To switch the shooting mode using the
(HOME) D (or E) button
On the HOME MENU, touch
(CAMERA) t [MOVIE] or [PHOTO].
To capture high resolution still images
during recording a movie (Dual Rec)
(DCR-SR190E/SR200E/SR290E/SR300E)
t For details, see page 26.
To change the recording media of still
images
t For details, see page 27.
Recording movies
[STBY] b [REC]
Recording still images
Flashing b Lights up
25
Recording/Playback
You can zoom in up to the magnifications
shown in the following table.
(optical zoom)
You can adjust the magnifications with the
power zoom lever or the zoom buttons on
the LCD frame.
Move the power zoom lever slightly for a
slower zoom. Move it further for a faster
zoom.
b Notes
[STEADYSHOT] may not reduce image
blurring as desired when the power zoom lever
is set to the T (Telephoto) side (except for DCR-
SR290E/SR300E).
Be sure to keep your finger on the power zoom
lever. If you move your finger off the power
zoom lever, the operation sound of the lever
may also be recorded.
You cannot change the zoom speed with the
zoom buttons on the LCD frame.
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
Using [DIGITAL ZOOM] (p. 55) let you zoom
in further than the magnification shown in the
table.
Sound picked up by the built-in microphone
is converted to 5.1ch surround sound and
recorded.
Your camcorder has Dolby Digital 5.1
Creator installed for recording 5.1ch
surround sound. Enjoy realistic sound when
playing the movie on devices that support
5.1ch surround sound.
Dolby Digital 5.1 Creator, 5.1ch surround sound
1 Glossary (p. 127)
b Notes
5.1ch sound is converted to 2ch when played back
on your camcorder.
is displayed on the screen during 5.1ch
recording/playback.
Zooming
DCR-SR32E/SR33E/SR42E 40 ×
DCR-SR52E/SR62E/SR72E/SR82E 25 ×
DCR-SR190E/SR200E/SR290E/SR300E 10 ×
Close view: (Telephoto)
Wider range of view:
(Wide angle)
Recording sound with more
presence (5.1ch surround
recording) (DCR-SR190E/
SR200E/SR290E/SR300E)
Built-in
microphone
Recording/Playback
26
Press (flash) repeatedly to select an
appropriate setting.
No indication (Auto flash): Automatically
flashes when there is insufficient ambient
light.
r
(Forced flash): Always uses the flash
regardless of the surrounding brightness.
r
(No flash): Records without flash.
b Notes
The recommended distance to the subject when
using the built-in flash is approximately 0.3 to
2.5 m (1 to 8 feet).
Remove any dust from the surface of the flash
lamp before using it. Flash effect may be
impaired if heat discoloration or dust obscures
the lamp.
The flash charge lamp flickers while charging
the flash, and remains lit when the battery
charge is complete.
If you use the flash in bright places such as
when shooting a backlit subject, the flash may
not be effective.
When attaching a conversion lens (optional) or a
filter (optional) to your camcorder, the flash
light does not emit light.
z Tips
You can change the brightness of the flash by
setting [FLASH LEVEL] (p. 59), or you can
prevent the redeye by setting [REDEYE
REDUC] (p. 59).
You can capture high quality still images
while recording a movie on the hard disk.
1 Turn the POWER switch until the
(Movie) lamp lights up, then press START/
STOP to start movie recording.
2 Press PHOTO fully.
After you start recording, and before you
finish, you can capture up to 3 frames of
still images from your movie.
3 Press START/STOP to stop movie
recording.
Captured still images appear one by one,
and the images are recorded. When
disappears, the image has been recorded.
b Notes
When you record still images on a “Memory
Stick Duo,” do not eject the “Memory Stick
Duo” before recording a movie is finished and
the still images are recorded on it.
You cannot use the flash during Dual Rec.
Using the flash (DCR-SR190E/
SR200E/SR290E/SR300E)
Flash
Flash charge
lamp
Capturing high quality still
images during movie recording
(Dual Rec) (DCR-SR190E/
SR200E/SR290E/SR300E)
Orange color
boxes indicate the
number of
captured images.
When capturing is
finished, the color
changes to orange.
27
Recording/Playback
z Tips
Still images are recorded in the following sizes
with Dual Rec.
DCR-SR190E/SR200E:
2.3M (16:9 (wide))
–1.7M (4:3)
DCR-SR290E/SR300E:
4.6M (16:9 (wide))
–3.4M (4:3)
You can record still images during recording
standby in the same way as when the POWER
switch is set to (Still). You can also record
with the flash.
You can change the recording media of still
images to a “Memory Stick Duo.” In the
default setting, still images are recorded on
the hard disk of the camcorder.
You can use only a “Memory Stick Duo
marked with or
(p. 111).
Open the LCD panel, then insert the
“Memory Stick Duo” into the Memory
Stick Duo slot in the right direction until it
clicks.
To change the recording media of still
images
1 Touch (OPTION) t tab t
[STILL MEDIA].
2 Select the media in which you want to
save still images, then touch .
Your camcorder returns to recording
standby mode. If you select [MEMORY
STICK], appears on the screen.
To eject a “Memory Stick Duo”
Open the LCD panel, lightly push the
“Memory Stick Duo” in once.
b Notes
Do not try to force the “Memory Stick Duo” out.
Doing so may result in damage.
When the ACCESS lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
If you insert the “Memory Stick Duo” into the
slot in the wrong direction, the “Memory Stick
Duo,” the “Memory Stick Duo” slot, or image
data may be damaged.
z Tips
The number of recordable images varies
depending on the image quality or the image
size. For details, see page 57.
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E:
Set the NIGHTSHOT PLUS switch to ON.
( appears.)
Recording still images on a
“Memory Stick Duo”
ACCESS lamp
(“Memory Stick Duo”)
Recording in dark places
(NightShot plus/NightShot)
Infrared port
28
b Notes
The NightShot plus and Super NightShot plus
functions use infrared light. Therefore, do not
cover the infrared port with your fingers or other
objects, and remove the conversion lens
(optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
Do not use the NightShot plus and Super
NightShot plus functions in bright places. This
may cause a malfunction.
z Tips
To record an image brighter, use Super
NightShot plus function (p. 70). To record an
image more faithfully to the original colors, use
Color Slow Shutter function (p. 70).
DCR-SR190E/SR200E/SR290E/SR300E:
Set the NIGHTSHOT switch to ON. (
appears.)
b Notes
The NightShot and Super NightShot functions
use infrared light. Therefore, do not cover the
infrared port with your fingers or other objects,
and remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
Do not use the NightShot and Super NightShot
functions in bright places. This may cause a
malfunction.
z Tips
To record an image brighter, use Super
NightShot function (p. 70). To record an image
more faithfully to the original colors, use Color
Slow Shutter function (p. 70).
To adjust the exposure for backlit subjects,
press BACK LIGHT to display .. To
cancel the back light function, press BACK
LIGHT again.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
z Tips
A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
To select the aspect ratio of the
movies
DCR-SR32E/SR33E/SR42E:
1 Turn the POWER switch until the
(Movie) lamp lights up.
NIGHT SHOT
OFF
ON
Infrared port
Adjusting the exposure for
backlit subjects
Recording in mirror mode
Selecting the aspect ratio (16:9
or 4:3) of the recording image
29
Recording/Playback
2 On the HOME MENU, touch
(SETTINGS) t [MOVIE
SETTINGS] t [WIDE SELECT] t
[4:3] or [16:9 WIDE] (p. 54).
DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E:
1 Turn the POWER switch until the
(Movie) lamp lights up.
2 Press WIDE SELECT repeatedly to
select the desired screen aspect ratio.
b Notes
Differences in the angle of view between 16:9
(wide) and 4:3 vary depending on the zoom
position.
When you view the movie on a TV, set [TV
TYPE] to [16:9] or [4:3] according to your TV
(16:9/4:3) (p. 62).
When you view 16:9 (wide) images with [TV
TYPE] set to [4:3], they may appear rough
depending on subjects.
To select the aspect ratio of the still
images (except for DCR-SR32E/
SR33E/SR42E)
1 Turn the POWER switch until the
(Still) lamp lights up.
The aspect ratio changes to 4:3
automatically.
2 Press WIDE SELECT repeatedly to
select the desired screen aspect ratio.
b Notes
For DCR-SR52E/SR62E/SR72E/SR82E, the
size of still images is [ 0.7M] (16:9 (wide))
or [1.0M] (4:3) at maximum.
For DCR-SR190E/SR200E, the size of still
images is [ 3.0M] (16:9 (wide)) or [4.0M]
(4:3) at maximum.
For DCR-SR290E/SR300E, the size of still
images is [ 4.6M] (16:9 (wide)) or [6.1M]
(4:3) at maximum.
z Tips
For the number of recordable still images, see
page 57.
Fast moving subjects and actions, which
cannot be captured under the ordinary
shooting conditions, can be shot in smooth
moving slow-motion for about 3 seconds.
This is useful to shoot fast actions such as a
golf or tennis swing.
1 Turn the POWER switch to turn on the
camcorder.
2 Press (HOME) A (or B) to display
the HOME MENU.
3 Touch (CAMERA).
4 Touch [SMTH SLW REC].
Recording the fast action in
slow-motion (SMTH SLW REC)
(DCR-SR190E/SR200E/SR290E/
SR300E)
(HOME) B
(HOME) A
30
5 Press START/STOP.
An about 3 second-movie is recorded as a
12 second-slow-motion-movie.
When [Recording···] disappears, recording
is finished.
Touch to cancel the smooth slow
recording.
To change the setting
Touch (OPTION) t tab, then
select the setting you want to change.
• [TIMING]
Select the recording start point after
START/STOP is pressed. The default
setting is [3sec AFTER].
• [RECORD SOUND]
Select [ON] ( ) to superimpose sounds
such as conversation on the slow motion
pictures (The default setting is [OFF]).
Your camcorder records sounds for about
12 seconds while [Recording···] is
displayed in step 5.
b Notes
Sounds are not recorded during the about 3
second-movie shooting.
Image quality of [SMTH SLW REC] is not as
good as that of normal recording.
[3sec AFTER]
[3sec BEFORE]
31
Recording/Playback
Recording/Playback
Playback
1 Turn the POWER switch A to turn on your camcorder.
2 Press (VIEW IMAGES) B (or C) button.
The VISUAL INDEX screen appears on the LCD screen. (It may take some time to
display the thumbnails.)
1 : Displays movies.
2 : Displays still images on the hard disk.
3 : Displays still images on a “Memory Stick Duo.”
z Tips
Moving the power zoom lever F let you select whether to display 6 or 12 images on the
VISUAL INDEX screen. To fix this number, touch (SETTINGS) on the HOME MENU
t [VIEW IMAGES SET] t [ DISPLAY] (p. 61).
POWER
switch A
Power zoom lever F
(HOME) E
(VIEW IMAGES) B button
(HOME) D
(VIEW
IMAGES) C
button
Previous
6 images
Next
6 images
Searches for images
by date (p. 33)
Appears with the image on each of the tab that was lastly played back/
recorded (B for the still image).
Returns to the
recording screen
(OPTION)
Returns to the
recording screen
32
3 Start playback.
Touch the tab, and the movie to be played back.
Touch the , or tab, and the still image to be played back.
To switch to the playback mode using
the (HOME) D (or E) button
On the HOME MENU, touch (VIEW
IMAGES) t [VISUAL INDEX].
To adjust the sound volume of movies
Touch (OPTION) t tab t
[VOLUME], then adjust the volume with
/.
z Tips
When playback from the selected movie reaches
the last movie, the screen returns to the
VISUAL INDEX screen.
Touch / during pause to play back
movie slowly.
One touch of
/ makes the reverse/
fast forward approximately 5 times faster, 2
touches makes it approximately 10 times faster,
3 touches makes it approximately 30 times
faster, and 4 touches makes it approximately 60
times faster.
Movies
Beginning of the
movie/previous
movie
Toggles Play or Pause as you touch
Next movie
Stop (go to the VISUAL
INDEX screen)
Reverse/ Forward
(OPTION)
Return (to the VISUAL
INDEX screen)
Still images
Previous/Next
Go to the VISUAL
INDEX screen
(OPTION)
Return (to the VISUAL
INDEX screen)
Slide show button (p. 34)
33
Recording/Playback
You can magnify still images from about
1.1 to 5 times the original size.
Magnification can be adjusted with the
power zoom lever or the zoom buttons on
the LCD frame.
1 Play back the still images you want to
magnify.
2 Magnify the still image with T
(Telephoto).
The screen is framed.
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch .
You can search for desired images by date
efficiently.
1 Turn the POWER switch to turn on the
camcorder, and press (VIEW
IMAGES) button.
The VISUAL INDEX screen appears on
the LCD screen.
2 To search for movies, touch tab. To
search for still images, touch tab.
You cannot search for images recorded on
“Memory Stick Duo” by date.
3 Touch [DATE].
The recording dates of images are
displayed on the screen.
4 Touch Previous/Next Date button to
select the date of the desired image.
5 Touch while the selected date of
the desired image is highlighted.
The images for selected date are
displayed on the VISUAL INDEX
screen.
Using PB zoom Searching for desired images by
date (Date Index)
Return to the VISUAL INDEX screen
Previous/Next Date button
Recording/Playback
34
Touch on the still image playback
screen.
The slide show begins from the selected
image.
Touch to stop the slide show. To
restart, touch again.
b Notes
You cannot operate playback zoom during slide
show.
z Tips
You can set continuous slide show playback by
selecting (OPTION) t tab t
[SLIDE SHOW SET]. The default setting is
[ON] (continuous playback).
Playing back a series of still
images (Slide show)
35
Recording/Playback
Playing the image on a TV
Connect your camcorder to the input jack of TV or VCR using A/V connecting cable 1 or
A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall socket using the
supplied AC Adaptor for this operation (p. 13). Refer also to the instruction manuals supplied
with the devices to be connected.
To view the recorded images on a computer, see page 73.
1 A/V connecting cable (supplied)
The Handycam Station and your camcorder are
both equipped with A/V OUT jacks (p. 120,
121). Connect the A/V connecting cable either
to the Handycam Station or to your camcorder,
according to your setup.
2 A/V connecting cable with S VIDEO
(optional)
When connecting to another device via the S
VIDEO jack, by using an A/V connecting cable
with an S VIDEO cable (optional), higher
quality images can be produced than with an
A/V connecting cable. Connect the white and
red plug (left/right audio) and the S VIDEO
plug (S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable (optional). The
yellow plug connection is not necessary. S
VIDEO connection only will not output audio.
b Notes
Do not connect A/V connecting cables to both
your camcorder and the Handycam Station at the
same time. The image might get disturbed.
z Tips
You can display the counter on the TV screen by
setting [DISP OUTPUT] to [V-OUT/PANEL]
(p. 63).
When your TV is connected to a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2, etc.),
if the VCR has an input selector.
A/V OUT
IN IN
S VIDEO
VIDEO
AUDIOAUDIO
VIDEO
: Signal flow
A/V OUT jack
Device without
an S VIDEO jack
Device with an
S VIDEO jack
(Yellow)
(White)
(Red)
VCRs or TVs
(Yellow)
(White)
(Red)
36
To set the aspect ratio according to the
connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
1 Turn the POWER switch to turn on the
camcorder.
2 Touch (HOME) t
(SETTINGS) t [OUTPUT
SETTINGS] t [TV TYPE] t [16:9]
or [4:3] t .
b Notes
When you set [TV TYPE] to [4:3], the image
quality may deteriorate. Also, when the
recorded image’s aspect ratio switches between
16:9 (wide) and 4:3, the image may jitter.
On some 4:3 TVs, the still images recorded in
4:3 aspect ratio may not be displayed full
screen. This is not a malfunction.
When you play back an image recorded in 16:9
(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or red
(right channel) plug to the audio input jack
of your TV or VCR. When you want to play
the sound in monaural mode, use a
connecting cable for that purpose.
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder (For models with the mark
printed on their bottom surfaces only). This
adaptor is designed for output use only.
TV/VCR
37
Recording/Playback
Saving images
Recorded images are stored on the internal hard disk of your camcorder. Due to the limited
capacity of the internal hard disk, make sure that you save the image data to some type of external
media such as a DVD-R or a computer.
You can save the images recorded on the camcorder as described below.
By using the software on the supplied CD-ROM, you can save images on a DVD or the hard
disk of a computer.
Saving images using a computer
Creating a DVD with One
Touch
(One Touch Disc Burn)
You can save images recorded on
the camcorder directly to a DVD
with ease.
See “Creating a DVD with
One Touch” on page 77.
Saving images on a computer
You can save images recorded on
the camcorder on the hard disk of a
computer.
See “Importing images to
a computer” on page 81.
Creating a DVD with selected
images
You can save images imported to
your computer on a DVD. You can
also edit those images.
See “Creating and
copying a DVD” on page
90.
Saving images by connecting your camcorder to other devices
Dubbing to VCR or DVD/HDD
devices
See “Dubbing to VCR or
DVD/HDD recorders” on
page 45.
38
Editing
(OTHERS) category
This category enables you to edit the
images, to print still images and to connect
your camcorder to a computer.
DELETE
You can delete images on the hard disk or a
“Memory Stick Duo” (p. 38).
EDIT
You can edit the images on the hard disk or
a “Memory Stick Duo” (p. 40, 41).
PLAYLIST EDIT
You can create and edit a Playlist (p. 42).
PRINT
You can print still images on a connected
PictBridge printer (p. 46).
COMPUTER
You can connect your camcorder to a
computer (p. 73).
Deleting images
You can delete images recorded on the hard
disk or a “Memory Stick Duo” using your
camcorder.
b Notes
You cannot restore images once they are
deleted.
z Tips
You can select up to 100 images at one time.
You can delete a image when viewing it by
selecting (OPTION) t tab t
[DELETE].
You can free hard disk space by deleting
image data from the camcorder.
You can check the free hard disk space of
the camcorder using [ INFO] (p. 50).
b Notes
Important data should be saved on external media
(p. 37).
Do not try to delete the files on the hard disk of
the camcorder using a computer.
1 On the (HOME MENU), touch
(OTHERS) t [DELETE].
2 Touch [ DELETE].
3 Touch [ DELETE] (movies) or
[ DELETE] (still images),
according to the type of image
you want to delete.
Item list
(OTHERS) category
Deleting the images on the hard
disk
39
Editing
4 Touch the image to be deleted.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
5 Touch t [YES] t .
To delete all movies or still images at
one time
In step 3, touch [ DELETE ALL] or
[ DELETE ALL] t [YES] t [YES]
t .
To delete all the movies or the still
images recorded on the same day at
one time
1 On the (HOME MENU), touch
(OTHERS) t [DELETE] t [
DELETE].
2 Touch [ DELETE by date] or [
DELETE by date] according to the type
of image you want to delete.
The recording dates of images are
displayed on the screen.
3 Touch Previous/Next Date button to
select the recording date of the desired
image.
4 Touch while the selected recording
date is highlighted.
The images recorded on the selected
date are displayed on the screen.
Touch the image on the LCD screen to
confirm the image. Touch to return
to the previous screen.
5 Touch t [YES] t .
b Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while deleting the
images. It may damage the hard disk.
If the deleted movie is included in the Playlist
(p. 42), the movie is deleted also from the
Playlist.
z Tips
To delete all images recorded on the hard disk,
and recover all the recordable space of hard
disk, format the hard disk (p. 49).
The images recorded by this camcorder and
stored onto the hard disk are called “original.”
To delete images on a “Memory Stick
Duo,” insert it in your camcorder before the
operation.
1 On the (HOME MENU), touch
(OTHERS) t [DELETE].
2 Touch [ DELETE].
3 Touch [ DELETE].
Previous/Next button
Deleting the still images in the
“Memory Stick Duo”
40
4 Touch the still image to be
deleted.
The selected still image is marked with
.
Press and hold the still image on the LCD
screen to confirm the still image.
Touch to return to the previous
screen.
5 Touch t [YES] t .
To delete all still images on the
“Memory Stick Duo”
In step 3, touch [ DELETE ALL] t
[YES] t [YES] t .
b Notes
You cannot delete still images in the following
cases:
“Memory Stick Duo” is write-protected
(p. 111).
write-protection is set to the still images by
the other device.
z Tips
To delete all images recorded on the “Memory
Stick Duo,” format the “Memory Stick Duo”
(p. 50).
Dividing a movie
You can divide movies on the hard disk of
your camcorder.
b Notes
During Easy Handycam operation, you cannot
divide movies. Cancel Easy Handycam
operation.
1 On the (HOME MENU), touch
(OTHERS) t [EDIT].
2 Touch [DIVIDE].
3 Touch the movie to be divided.
The selected movie starts playback.
4 Touch at the point where
you want to divide the movie into
scenes.
The movie pauses.
Play and pause toggles as you press
.
5 Touch t [YES] t .
Adjusts the dividing point with more
precision after the dividing point has
been selected with .
Returns to the beginning of the
selected movie.
41
Editing
b Notes
You cannot restore movies once they are
divided.
Do not remove the battery pack or the AC
Adaptor from your camcorder while dividing
the movie. It may damage the hard disk.
If the divided original movie is included in the
Playlist, the movie in the Playlist will also be
divided.
A slight difference may occur from the point
where you touch and the actual dividing
point, as your camcorder selects the dividing
point based on about half-second increments.
Copying still images
You can copy still images from the hard
disk to a “Memory Stick Duo.”
Insert a “Memory Stick Duo” in your
camcorder before the operation.
z Tips
You can select up to 100 still images at one
time.
You can copy a still image when viewing it by
selecting (OPTION) t tab t
[COPYt ].
1 On the (HOME MENU), touch
(OTHERS) t [EDIT] t
[COPY].
2 Touch [ t COPY].
3 Touch the still image to be
copied.
The selected still image is marked with
.
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
4 Touch t [YES].
Copying starts.
5 When [Completed.] appears,
touch .
42
To copy all the still images recorded
on the same day at one time
1 On the (HOME MENU), touch
(OTHERS) t [EDIT] t [COPY].
2 Touch [ t COPY by date].
The recording dates of still images are
displayed on the screen.
3 Touch Previous/Next Date button to
select the recording date of the desired
still image.
4 Touch while the selected recording
date is highlighted.
The still images recorded on the
selected date are displayed on the
screen.
Touch the image on the LCD screen to
confirm the still image. Touch to
return to the previous screen.
5 Touch t [YES] t .
b Notes
Use the AC Adaptor as the power source to
prevent your camcorder from running out of
power during copying.
Do not apply shock or vibration to your
camcorder, and do not disconnect the AC
Adaptor during copying.
It may take long when there are many still
images to be copied.
You cannot copy still images on a “Memory
Stick Duo” to the hard disk.
Previous/Next button
Creating the Playlist
A Playlist is a list showing thumbnails of
the movies that you have selected. The
original movies are not modified even
though you edit or delete the movies in the
Playlist.
b Notes
During Easy Handycam operation, you cannot
add movies to the Playlist or edit the Playlist.
Cancel Easy Handycam operation.
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST
EDIT].
2 Touch [ ADD].
3 Touch the movie to be added to
the Playlist.
.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
4 Touch t [YES] t .
43
Editing
To add all the movies recorded on the
same day at one time
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST EDIT].
2 Touch [ ADD by date].
The recording dates of movies are
displayed on the screen.
3 Touch Previous/Next Date button to
select the recording date of the desired
movie.
4 Touch while the selected recording
date is highlighted.
The movies recorded on the selected
date are displayed on the screen.
Touch the image on the LCD screen to
confirm the movie. Touch to return
to the previous screen.
5 Touch t [YES] t .
b Notes
Do not remove the battery pack or the AC
Adaptor from your camcorder while editing the
Playlist. It may damage the hard disk.
You cannot add still images to a Playlist.
z Tips
You can add a maximum of 99 movies to the
Playlist.
You can add a movie when viewing it by
selecting (OPTION) t tab t
[ ADD].
You can copy the Playlist to a DVD as it is, by
using the supplied software (p. 91).
1 On the (HOME MENU), touch
(VIEW IMAGES) t
[PLAYLIST]
The Playlist screen appears.
2 Touch the image from which you
want to playback.
The Playlist is played back from the
selected image to the end, then the
screen returns to the Playlist screen.
To erase unnecessary images from
the Playlist
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST EDIT].
2 Touch [ ERASE].
To erase all the images from the
Playlist, touch [ ERASE ALL] t
[YES] t [YES] t .
3 Select the image to be deleted from the
list.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
Previous/Next button
Playing the Playlist
44
4 Touch t [YES] t .
z Tips
The original images are not changed even if you
erase the images from the Playlist.
To change the order within the Playlist
1 On the (HOME MENU), touch
(OTHERS) t [PLAYLIST EDIT].
2 Touch [ MOVE].
3 Select the image to be moved.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
4 Touch .
5 Select the destination with [T]/[t].
6 Touch t [YES] t .
z Tips
When you select multiple images, the images
are moved following the order appeared in the
Playlist.
Destination bar
45
Editing
Dubbing to VCR or DVD/HDD recorders
You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation
(p. 13). Refer also to the instruction manuals supplied with the devices to be connected.
b Notes
Since dubbing is performed via analog data transfer, the image quality may deteriorate.
A A/V connecting cable (supplied)
The Handycam Station and your camcorder
are both equipped with A/V OUT jacks
(p. 120, 121). Connect the A/V connecting
cable either to the Handycam Station or to
your camcorder, according to your setup.
B A/V connecting cable with S VIDEO
(optional)
When connecting to another device via the S
VIDEO jack, by using an A/V connecting
cable with an S VIDEO cable (optional),
higher quality images can be produced than
with an A/V connecting cable. Connect the
white and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the A/V
connecting cable with an S VIDEO cable
(optional). The yellow plug connection is not
necessary. S VIDEO connection only will not
output audio.
b Notes
To hide the screen indicators (such as a counter,
etc.) on the screen of the monitor device
connected, set (SETTINGS) t [OUTPUT
SETTINGS] t [DISP OUTPUT] t [LCD
PANEL] (the default setting) on the HOME
MENU (p. 63).
To record the date/time and camera settings
data, display them on the screen (p. 60).
When you are connecting your camcorder to a
monaural device, connect the yellow plug of the
A/V connecting cable to the video input jack,
and the red (right channel) or the white (left
channel) plug to the audio input jack on the
device.
A/V OUT
IN IN
S VIDEO
VIDEO
AUDIOAUDIO
VIDEO
VCRs or DVD/
HDD recorders
: Video/Signal flow
A/V OUT jack
Device without an
S VIDEO jack
Device with an
S VIDEO jack
(Yellow)
(White)
(Red)
(Yellow)
(White)
(Red)
46
1 Turn on your camcorder, and
press (VIEW IMAGES) button.
Set [TV TYPE] according to the display
device (p. 62).
2 Insert the recording media in the
recording device.
If your recording device has an input
selector, set it to the input mode.
3 Connect your camcorder to the
recording device (VCR or DVD/
HDD recorder) with the A/V
connecting cable (supplied) 1 or
an A/V connecting cable with S
VIDEO (optional) 2.
Connect your camcorder to the input
jacks of the recording device.
4 Start the playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals
supplied with your recording device for
details.
5 When dubbing is finished, stop
the recording device, and then
your camcorder.
Printing recorded
images
(PictBridge
compliant printer)
You can print out still images using a
PictBridge compliant printer, without
connecting the camcorder to a computer.
Connect your camcorder to the AC Adaptor
to obtain power from the wall socket
(p. 13). Turn on the printer.
To print still images on a “Memory Stick
Duo,” insert the “Memory Stick Duo”
containing them into your camcorder.
1 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
2 Set the camcorder onto the
Handycam Station securely, then
turn the POWER switch to turn
on.
3 Connect the (USB) jack of the
Handycam Station to the printer
using the supplied USB cable.
Connecting your camcorder to
the printer
47
Editing
[USB SELECT] appears on the screen
automatically.
4 Touch [ PRINT] (hard disk) or
[ PRINT] (“Memory Stick Duo”)
depending on the media of the
image to be printed.
You can select a still image on the
screen.
b Notes
We can guarantee the operation of only models
that are PictBridge compatible.
1 Touch the still image to be
printed.
The selected image is marked with .
Press and hold the image on the LCD
screen to confirm the image.
Touch to return to the previous
screen.
2 Touch (OPTION), set the
following options, then touch
.
[COPIES]: Set number of copies of a
still image to be printed. You can set up
to 20 copies.
[DATE/TIME]: Select [DATE],
[DAY&TIME], or [OFF] (no date/time
printed).
[SIZE]: Select the paper size.
If you do not change the setting, go to
step 3.
3 Touch [EXEC] t [YES] t .
The image selection screen appears
again.
To finish printing
Touch on the image selection screen.
b Notes
Refer also to the instruction manual of the
printer to be used.
Do not attempt the following operations when
is on the screen. The operations may not be
performed properly.
To operate the POWER switch
To press (VIEW IMAGES) button
To remove your camcorder from the
Handycam Station
To disconnect the USB cable (supplied) from
the Handycam Station or the printer
To remove the “Memory Stick Duo” from
your camcorder, in the case of [ PRINT]
If the printer stops working, disconnect the USB
cable, turn the printer off and on again, and
restart the operation from the beginning.
You can select only the paper sizes that the
printer can print.
Printing
When connection is complete,
(PictBridge connecting) appears on
the screen.
48
On some printer models, the top, bottom, right,
and left edges of images may be trimmed. If you
print a still image recorded in a 16:9 (wide)
ratio, the left and right ends of the image may be
trimmed widely.
Some printer models may not support the date
printing function. Refer to your printer’s
instruction manual for details.
The images described below may not be printed
out:
The image edited by a computer
The image recorded by other devices
The image file exceeding 3 MB
The image file larger than 2848 × 2136 pixels
z Tips
PictBridge is an industry standard established
by the Camera & Imaging Products Association
(CIPA). You can print still images without using
a computer by connecting a printer directly to a
digital video camera or digital still camera,
regardless of model or manufacturer.
You can print a still image when viewing it by
selecting (OPTION) t tab t
[PRINT].
49
Utilizing recording media
Utilizing recording media
(MANAGE HDD/
MEMORY) category
This category enables you to use the hard
disk or a “Memory Stick Duo” for various
purposes.
FORMAT
You can format the hard disk and recover
recordable free space (p. 49).
FORMAT
You can format the “Memory Stick Duo”
and recover the recordable free space
(p. 50).
INFO
You can display the hard disk capacity
(p. 50).
Formatting the hard
disk or the “Memory
Stick Duo”
You can delete all the images on the hard disk
of the camcorder to recover recordable free
space to allow you to write in.
Connect your camcorder to the wall socket
using the supplied AC adaptor for this
operation (p. 13).
b Notes
To avoid the loss of important images, you should
save them (p. 37) before performing
[FORMAT].
1 On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[FORMAT].
2 Touch [YES] t [YES].
3 When [Completed.] appears,
touch .
b Notes
While [ FORMAT] is activated, do not
remove the AC Adaptor or the battery pack.
Item list
(MANAGE HDD/MEMORY)
category
Formatting the hard disk
50
Formatting deletes all images on a
“Memory Stick Duo.”
1 Turn on your camcorder.
2 Insert the “Memory Stick Duo” to
be formatted into your
camcorder.
3 On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[FORMAT].
4 Touch [YES] t [YES].
5 When [Completed.] appears,
touch .
b Notes
Even the still images protected with another
device against accidental deletion are also
deleted.
Do not attempt the following operations when
[Executing...] is on the screen:
To operate the POWER switch or buttons
To remove the “Memory Stick Duo”
Formatting the “Memory Stick
Duo”
Checking the hard
disk information
You can display the hard disk information,
and check the approximate amount of free
hard disk space.
On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[INFO].
To turn off the display
Touch .
b Notes
The calculation for hard disk space is 1MB =
1 048 576 bytes. The fractions less than MB are
discarded when the hard disk space is displayed.
The displayed size of the whole hard disk space
will be slightly smaller than the size shown
below despite of displaying both free and used
hard disk space.
DCR-SR32E/SR42E/SR52E/SR62E:
30 000 MB
DCR-SR72E/SR82E:
60 000MB
DCR-SR33E/SR190E/SR200E/SR290E/
SR300E:
40 000MB
Since there is the management file area, the used
space is not displayed as 0MB even if you
perform [ FORMAT] (p. 49).
51
Utilizing recording media
Preventing data on the hard disk of the
camcorder from being recovered
[ EMPTY] allows you to write non
important data onto the hard disk of the
camcorder. In this way, it may become
more difficult to recover any original data.
When you dispose or transfer the
camcorder to others, it is recommended that
you perform [ EMPTY].
Connect your camcorder to the wall socket
using the supplied AC Adaptor for this
operation (p. 13)
b Notes
If you perform [ EMPTY], all the images
are deleted. To avoid the loss of important
images, they should be saved (p. 37) before
performing [ EMPTY].
You cannot perform [ EMPTY] unless you
connect the AC adaptor to the wall socket.
Disconnect all cables except the AC Adaptor.
Do not disconnect the AC Adaptor during the
operation.
While performing [ EMPTY], do not apply
any vibrations or shocks.
1 Make sure the AC Adaptor is
connected, then turn the POWER
switch to turn on.
z Tips
You can perform this operation, whichever
position of the (Movie) lamp/ (Still)
lamp is lit.
2 On the (HOME MENU), touch
(MANAGE HDD/MEMORY) t
[ FORMAT].
The [ FORMAT] screen appears.
3 Press and hold BACK LIGHT
button for a few seconds.
The [ EMPTY] screen appears.
4 Touch [YES] t [YES].
5 When [Completed.] appears,
touch .
b Notes
The actual performing time for [ EMPTY]
is as follows;
DCR-SR32E/SR42E/SR52E/SR62E:
approx. 30 minutes
DCR-SR72E/SR82E:
approx. 60 minutes
DCR-SR33E/SR190E/SR200E/SR290E/
SR300E:
approx. 40 minutes
If you stop performing [ EMPTY] between
step 4 and 5, be sure to complete the operation
by performing [ FORMAT] or [
EMPTY] when you use the camcorder next
time.
52
Customizing your camcorder
What you can do with the (SETTINGS)
category of the HOME MENU
You can change the recording functions and
the operating settings for your convenience.
1 Turn on your camcorder, then
press (HOME).
2 Touch (SETTINGS).
3 Touch the desired setup item.
If the item is not on the screen, touch v/
V to change the page.
4 Touch the desired item.
If the item is not on the screen, touch v/
V to change the page.
5 Change the setting, then touch
.
Using the HOME MENU
(SETTINGS) category
(HOME)
(HOME)
53
Customizing your camcorder
MOVIE SETTINGS (p. 54)
PHOTO SETTINGS (p. 57)
VIEW IMAGES SET (p. 60)
SOUND/DISP SET*
6
(p. 61)
OUTPUT SETTINGS (p. 62)
CLOCK/ LANG (p. 63)
GENERAL SET (p. 64)
*
1
DCR-SR32E/SR33E/SR42E
*
2
DCR-SR190E/SR200E/SR290E/SR300E
*
3
DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E
*
4
You can set these items also during Easy
Handycam operation (p. 20).
*
5
DCR-SR290E/SR300E
*
6
[SOUND SETTINGS] (during Easy
Handycam operation)
List of the (SETTINGS)
category items
Items Page
REC MODE
54
NIGHTSHOT LIGHT
54
WIDE SELECT*
1
54
DIGITAL ZOOM
55
STEADYSHOT
55
AUTO SLW SHUTTR
55
GUIDEFRAME*
2
56
ZEBRA*
2
56
REMAINING
56
FLASH LEVEL*
2
59
REDEYE REDUC*
2
59
Items Page
IMAGE SIZE*
3
*
4
57
QUALITY
58
FILE NO.
58
NIGHTSHOT LIGHT
54
STEADYSHOT*
5
55
GUIDEFRAME*
2
56
ZEBRA*
2
56
FLASH LEVEL*
3
59
REDEYE REDUC*
3
59
STILL MEDIA*
4
27
Items Page
DATA CODE
60
DISPLAY
61
Items Page
VOLUME*
4
61
BEEP*
4
61
LCD BRIGHT
61
LCD BL LEVEL
62
LCD COLOR
62
Items Page
TV TYPE
62
DISP OUTPUT
63
Items Page
CLOCK SET*
4
17
AREA SET
63
SUMMERTIME
63
LANGUAGE SET*
4
63
Items Page
DEMO MODE
64
CALIBRATION
115
A.SHUT OFF
64
REMOTE CTRL*
3
64
DROP SENSOR
64
54
MOVIE SETTINGS
(Items for recording movies)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
You can select a recording mode to record a
movie with the image quality from 3 levels.
HQ
Records in high quality mode.
(9M (HQ))
B SP
Records in standard quality mode.
(6M (SP))
LP
Increases the recording time (Long Play).
(3M (LP))
Recordable time (approx.)
DCR-SR32E/SR42E/SR52E/SR62E:
REC MODE
Recording mode Recordable time
HQ
7 hours 20 min.
SP
10 hours 50 min.
LP
20 hours 50 min.
DCR-SR72E/SR82E:
DCR-SR33E/SR190E/SR200E/SR290E/
SR300E:
b Notes
If you record in the LP mode, the quality of
scenes may be degraded, or scenes with quick
movements may appear with a block noise when
you play back the movie.
When using either the NightShot plus/
NightShot (p. 27) or [S. NIGHTSHOT
PLS] (p. 70)/[SUPER NIGHTSHOT]
(p. 70) function to record, you can record
clearer images by setting [NIGHTSHOT
LIGHT], which emits infrared light
(invisible), to [ON] (the default setting).
b Notes
Do not cover the infrared port with your fingers
or other objects.
Remove the conversion lens (optional).
The maximum shooting distance using
[NIGHTSHOT LIGHT] is about 3 m (10 feet).
When recording images, you can select the
aspect ratio according to the TV connected.
Refer also to the instruction manuals
supplied with your TV.
Recording mode Recordable time
HQ
14 hours 40 min.
SP
21 hours 40 min.
LP
41 hours 50 min.
Recording mode Recordable time
HQ
9 hours 30 min.
SP
14 hours 30 min.
LP
28 hours
NIGHTSHOT LIGHT
WIDE SELECT
(DCR-SR32E/SR33E/
SR42E)
55
Customizing your camcorder
B 4:3
Records images to the full screen on a 4:3
TV screen.
16:9 WIDE ( )
Records images to the full screen on a 16:9
(wide) TV screen.
b Notes
Set [TV TYPE] correctly according to the TV
connected for playback (p. 62).
You can select the maximum zoom level in
case you want to zoom greater than optical
zoom magnification (p. 25). Note that the
image quality decreases when you use the
digital zoom.
DCR-SR32E/SR33E/SR42E:
B OFF
Up to 40 × zoom is performed optically.
80 ×
Up to 40 × zoom is performed optically,
and after that, up to 80 × zoom is
performed digitally.
2000 ×
Up to 40 × zoom is performed optically,
and after that, up to 2000 × zoom is
performed digitally.
DCR-SR52E/SR62E/SR72E/SR82E:
B OFF
Up to 25 × zoom is performed optically.
50 ×
Up to 25 × zoom is performed optically,
and after that, up to 50 × zoom is
performed digitally.
2000 ×
Up to 25 × zoom is performed optically,
and after that, up to 2000 × zoom is
performed digitally.
DCR-SR190E/SR200E:
B OFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
80 ×
Up to 10 × zoom is performed optically,
and after that, up to 80 × zoom is
performed digitally.
DCR-SR290E/SR300E:
B OFF
Up to 10 × zoom is performed optically.
20 ×
Up to 10 × zoom is performed optically,
and after that, up to 20 × zoom is
performed digitally.
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] ( ) when
using a tripod (optional), then the image
becomes natural.
When recording in dark places, the shutter
speed is automatically reduced to 1/25
second (the default setting is [ON]).
DIGITAL ZOOM
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
STEADYSHOT
AUTO SLW SHUTTR
(Auto Slow Shutter)
56
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
z Tips
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting, is displayed. The zebra pattern
is not recorded.
B OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
b Notes
Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z Tips
IRE represents the screen brightness level.
B AUTO
Displays the remaining recording time of
movies for about 8 seconds in situations
such as those described below.
When your camcorder recognizes the
remaining hard disk capacity with the
POWER switch is set to (Movie).
When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch is set to (Movie).
When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining hard disk
indicator.
b Notes
When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
S
See page 59.
S
See page 59.
GUIDEFRAME
(DCR-SR190E/SR200E/
SR290E/SR300E)
ZEBRA (DCR-SR190E/
SR200E/SR290E/
SR300E)
REMAINING
FLASH LEVEL
(DCR-SR190E/SR200E/
SR290E/SR300E)
REDEYE REDUC
(DCR-SR190E/SR200E/
SR290E/SR300E)
57
Customizing your camcorder
PHOTO SETTINGS
(Items for recording still images)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
DCR-SR52E/SR62E/SR72E/SR82E:
B 1.0M ( )
Records still images clearly.
VGA (0.3M) ( )
Allows the maximum number of still
images to be recorded.
z Tips
The image size is set to [ 0.7M]
automatically in the aspect ratio 16:9 (wide).
DCR-SR190E/SR200E:
B 4.0M ( )
Records still images clearly.
1.9M ( )
Allows you to record more still images in
relatively clear quality.
VGA (0.3M) ( )
Allows the maximum number of still
images to be recorded.
z Tips
The image size is set to [ 3.0M]
automatically in the aspect ratio 16:9 (wide).
IMAGE SIZE (except
for DCR-SR32E/SR33E/
SR42E)
4.0M
DCR-SR290E/SR300E:
B 6.1M ( )
Records still images clearly.
3.1M ( )
Allows you to record more still images in
relatively clear quality.
VGA (0.3M) ( )
Allows the maximum number of still
images to be recorded.
z Tips
The image size is set to [ 4.6M]
automatically in the aspect ratio 16:9 (wide).
b Notes
You can set [ IMAGE SIZE] only while the
(Still) lamp is lit.
For DCR-SR32E/SR33E/SR42E, the image size
is fixed to [VGA (0.3M)].
z Tips
Still images are recorded in the following sizes
with Dual Rec.
DCR-SR190E/SR200E:
[ 2.3M] (16:9 (wide))
[1.7M] (4:3)
DCR-SR290E/SR300E:
[ 4.6M] (16:9 (wide))
[3.4M] (4:3)
Capacity of the “Memory Stick Duo”
(MB) and the number of recordable
images (approx.)
6.1M
2848 ×
2136
4.6M
2848 ×
1602
4.0M
2304 ×
1728
3.4M
2136 ×
1602
64MB 21
53
28
70
32
81
37
93
128MB 42
105
56
135
64
160
74
185
256MB 76
190
100
250
115
295
130
335
4.0M
58
b Notes
All numbers measured at the following setting:
Top: [FINE] is selected for image quality.
Bottom: [STANDARD] is selected for image
quality.
All numbers measured when using a “Memory
Stick Duo” made by Sony Corporation. The
number of recordable images varies depending
on the recording environment.
You can record up to 9,999 still images on the
hard disk.
Still image resolution is obtained by the unique
pixel array of Sony's ClearVid CMOS Sensor
and image processing system (new Enhanced
Imaging Processor)(DCR-SR190E/SR200E/
SR290E/SR300E).
B FINE ( )
Records still images at the fine image
quality level.
STANDARD ( )
Records still images at the standard image
quality level.
B SERIES
Assigns file numbers in sequence, even if
you change the recording media or replace
the “Memory Stick Duo.”
RESET
Assigns file numbers in sequence,
following the largest file number existing
on the current recording medium.
512MB 155
390
205
510
235
600
270
690
1GB 315
800
420
1050
480
1200
550
1400
2GB 650
1600
860
2150
990
2500
1100
2850
4GB 1250
3200
1700
4250
1950
4900
2250
5700
3.1M
2048 ×
1536
3.0M
2304 ×
1296
2.3M
2016 ×
1134
1.9M
1600 ×
1200
64MB 40
100
42
105
56
135
65
160
128MB 80
205
85
215
110
280
130
325
256MB 140
370
150
395
200
500
235
590
512MB 295
760
310
800
410
1000
480
1200
1GB 600
1550
640
1600
840
2100
980
2450
2GB 1200
3150
1300
3350
1700
4300
2000
5000
4GB 2400
6300
2600
6600
3400
8500
3950
9500
1.7M
1512 ×
1134
1.0M
1152 ×
864
0.7M
1152 ×
648
VGA
640 ×
480
64MB 72
175
120
325
160
390
390
980
128MB 145
355
245
650
325
780
780
1970
256MB 260
640
445
1150
590
1400
1400
3550
512MB 530
1300
900
2400
1200
2850
2850
7200
6.1M
2848 ×
2136
4.6M
2848 ×
1602
4.0M
2304 ×
1728
3.4M
2136 ×
1602
4.0M
3.0M
1.7M
1GB 1050
2650
1800
4900
2450
5900
5900
14500
2GB 2200
5500
3750
10000
5000
12000
12000
30000
4GB 4400
10500
7400
19500
9500
23500
23500
59000
QUALITY
FILE NO. (File number)
1.7M
1512 ×
1134
1.0M
1152 ×
864
0.7M
1152 ×
648
VGA
640 ×
480
1.7M
59
Customizing your camcorder
See page 54.
See page 55.
See page 56.
See page 56.
You can set this function when you use the
built-in flash (DCR-SR190E/SR200E/
SR290E/SR300E), or an external flash
(optional) that is compatible with your
camcorder.
HIGH( )
Makes the flash level higher.
B NORMAL( )
LOW( )
Makes the flash level lower.
You can set this function when you use the
built-in flash (DCR-SR190E/SR200E/
SR290E/SR300E), or an external flash
(optional) that is compatible with your
camcorder.
You can prevent redeye by activating the
flash before recording.
DCR-SR52E/SR62E/SR72E/SR82E:
Set [REDEYE REDUC] to [ON], when
using this function.
DCR-SR190E/SR200E/SR290E/SR300E:
Set [REDEYE REDUC] to [ON], then press
(flash) (p. 26) repeatedly to select a
setting.
(Auto redeye reduction): Pre-flashes to
reduce redeye before the flash automatically
flashes when there is insufficient ambient
light.
r
(Forced redeye reduction): Always
uses the flash and the redeye reducing pre-
flash.
r
(No flash): Records without flash.
b Notes
The redeye reduction may not produce the
desired effect due to individual differences and
other conditions.
See page 27.
NIGHTSHOT LIGHT
STEADYSHOT
(DCR-SR290E/SR300E)
GUIDEFRAME
(DCR-SR190E/SR200E/
SR290E/SR300E)
ZEBRA
(DCR-SR190E/SR200E/
SR290E/SR300E)
FLASH LEVEL (except
for DCR-SR32E/SR33E/
SR42E)
REDEYE REDUC (except
for DCR-SR32E/SR33E/
SR42E)
STILL MEDIA
60
VIEW IMAGES SET
(Items to customize the display)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
During playback, displays the information
(data code) recorded automatically at the
time of recording.
B OFF
Data code is not displayed.
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
DATE/TIME
ADate
BTime
DATA CODE
CAMERA DATA
CSteadyShot off
DBrightness
EWhite balance
FGain
GShutter speed
HAperture value
IExposure
z Tips
appears for an image recorded using a flash
(except for DCR-SR32E/SR33E/SR42E).
The data code is displayed on the TV screen if
you connect your camcorder to a TV.
The indicator toggles through the following
sequences as you press DATA CODE on the
Remote Commander: [DATE/TIME] t
[CAMERA DATA] t [OFF] (no indication)
(except for DCR-SR32E/SR33E/SR42E).
Depending on the hard disk condition, bars [--:--
:--] appear.
Movie
Still image
61
Customizing your camcorder
You can select the number of thumbnails
that appear on the VISUAL INDEX screen.
B ZOOM LINK
Change the number of thumbnails (6 or 12)
with the power zoom lever on your
camcorder.*
6IMAGES
Displays thumbnails of 6 images.
12IMAGES
Displays thumbnails of 12 images.
* You can operate with the zoom buttons on the
LCD frame or on the Remote Commander
(except for DCR-SR32E/SR33E/SR42E).
DISPLAY
SOUND/DISP SET
(Items to adjust beep and the screen)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
Touch / to adjust the volume
(p. 32).
B ON
A melody sounds when you start/stop
recording, or operate the touch panel.
OFF
Cancels the melody and shutter sound.
You can adjust the brightness of the LCD
screen.
1 Adjust the brightness with / .
2 Touch .
z Tips
This adjustment does not affect the recorded
images in any way.
VOLUME
BEEP
LCD BRIGHT
62
You can adjust the brightness of the LCD
screen’s backlight.
B NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
b Notes
When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
When you select [BRIGHT], battery life is
slightly reduced during recording.
If you open the LCD panel 180 degrees to face
the screen outside and close the LCD panel to
the camcorder body, the setting becomes
[NORMAL] automatically.
z Tips
This adjustment does not affect the recorded
images in any way.
You can adjust the color of the LCD screen
with / .
z Tips
This adjustment does not affect the recorded
images in any way.
LCD BL LEVEL
(LCD backlight level)
LCD COLOR
Low intensity High intensity
OUTPUT SETTINGS
(Items for when connecting other devices)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
You need to convert the signal depending
on the TV connected when playing back the
image. The recorded images are played
back as following illustrations.
16:9
(Default setting for DCR-SR52E/SR62E/
SR72E/SR82E/SR190E/SR200E/
SR290E/SR300E)
Select this to view your images on a 16:9
(wide) TV.
4:3
(Default setting for DCR-SR32E/SR33E/
SR42E)
Select this to view your images on a 4:3
standard TV.
TV TYPE
Wide (16:9)
images
4:3 images
Wide (16:9)
images
4:3 images
63
Customizing your camcorder
B LCD PANEL
Shows displays such as the time code on
the LCD screen.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen and the LCD screen.
DISP OUTPUT
CLOCK/ LANG
(Items to set clock and language)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
See page 17.
You can adjust a time difference without
stopping the clock.
Set your local area using v/V when using
your camcorder overseas.
Refer to the world time difference on page
109.
You can change this setting without
stopping the clock.
Set to [ON] to move the time forward
1 hour.
You can select the language to be used on
the LCD screen.
z Tips
Your camcorder offers [ENG[SIMP]]
(simplified English) for when you cannot
find your native tongue among the
options.
CLOCK SET
AREA SET
SUMMERTIME
LANGUAGE SET
64
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch v/V
to change the page.
How to set
(HOME MENU) t page 52
(OPTION MENU) t page 65
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you turn the POWER switch
to (Movie).
z Tips
The demonstration will be suspended in
situations such as those described below.
When you press START/STOP or PHOTO.
When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes).
When you remove or insert a “Memory Stick
Duo.”
When you turn the POWER switch to
(Still).
When you press (HOME)/ (VIEW
IMAGES) button.
See page 115.
DEMO MODE
CALIBRATION
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
When you connect your camcorder to a wall
socket, [A.SHUT OFF] is automatically set to
[NEVER].
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 122).
z Tips
Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
[DROP SENSOR] is set to [ON] as the
default setting. When the drop sensor has
detected that the camcorder has been
dropped ( appears), recording or playing
back recorded images may be disabled to
protect the internal hard disk.
b Notes
Set the drop sensor to [ON] (default setting)
when you use the camcorder. Otherwise when
you drop the camcorder, you may damage the
internal hard disk.
In a non-gravity situation, the drop sensor
activates. When you record images during
activity such as roller-coasting or skydiving,
you can set [DROP SENSOR] to [OFF] ( )
so as not to activate the drop sensor.
A.SHUT OFF (Auto shut
off)
REMOTE CTRL (Remote
control) (except for
DCR-SR32E/SR33E/
SR42E)
DROP SENSOR
65
Customizing your camcorder
Activating functions using the OPTION MENU
The OPTION MENU appears just like the
pop-up window that appears when you
right-click the mouse on a computer.
Various functions are displayed in the
context of the operation.
1 While using your camcorder,
touch (OPTION) on the screen.
2 Touch the desired item.
If you cannot find the desired item,
touch another tab to change the page.
3 Change the setting, then touch
.
When the item you want is not on the
screen
Touch another tab. If you cannot find the
item anywhere, the function does not work
under the situation.
b Notes
The tabs and items that appear on the screen
depend on the recording/playback status of your
camcorder at the time.
Some items appear without a tab.
The OPTION MENU cannot be used during
Easy Handycam operation.
Using the OPTION MENU
(OPTION)
Tab
66
See page 65 for setting operation.
*
1
Items that are included also in the HOME
MENU.
*
2
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
*
3
DCR-SR190E/SR200E/SR290E/SR300E
*
4
Except for DCR-SR32E/SR33E/SR42E
*
5
DCR-SR52E/SR62E/SR72E/SR82E
See page 65 for setting operation.
* Items that are included also in the HOME
MENU.
Recording items on the OPTION
MENU
Items *
1
Page
tab
FOCUS
-67
SPOT FOCUS
-67
TELE MACRO
-67
EXPOSURE
-68
SPOT METER
-68
SCENE SELECTION
-68
WHITE BAL.
-69
COLOR SLOW SHTR
-70
S. NIGHTSHOT PLS*
2
-70
SUPER NIGHTSHOT*
3
-70
tab
FADER
-71
D.EFFECT
-71
PICT.EFFECT
-71
tab
REC MODE
a 54
MICREF LEVEL
-71
IMAGE SIZE*
4
a 57
QUALITY
a 58
SELF-TIMER
-71
STILL MEDIA
a 27
FLASH MODE*
5
-72
TIMING*
3
-30
RECORD SOUND*
3
-30
Viewing items on the OPTION
MENU
Items * Page
tab
DELETE
a 38
DELETE by date
a 39
DELETE ALL
a 39
tab
DIVIDE
a 40
ERASE
a 43
ERASE ALL
a 43
MOVE
a 44
-- (A tab depends on the situation)
ADD
a 43
ADD by date
a 43
PRINT
a 46
SLIDE SHOW
-34
VOLUME
a 32
DATA CODE
a 60
SLIDE SHOW SET
-34
ADD
a 42
ADD by date
a 43
COPYt
a 41
COPY by date
a 42
-- (No tab)
COPIES
-47
DATE/TIME
-47
SIZE
-47
67
Customizing your camcorder
Functions set in the OPTION MENU
Items you can set only on the OPTION
MENU will be described below.
The default settings are marked with B.
You can adjust the focus manually. You can
select this function also when you want to
focus on a certain subject intentionally.
1 Touch [MANUAL].
9 appears.
2 Touch (focusing on close subjects)/
(focusing on distant subjects) to
sharpen the focus. appears when the
focus cannot be adjusted any closer, and
appears when the focus cannot be adjusted
farther away.
3 Touch .
To adjust the focus automatically, touch
[AUTO] t in step 1.
b Notes
The minimum possible distance between
camcorder and subject while maintaining sharp
focus is about 1 cm (about 13/32 in.) for wide
angle and about 80 cm (about 2 5/8 feet) for
telephoto.
z Tips
It is easier to focus on the subject by moving the
power zoom lever towards T (telephoto) to
adjust the focus, then towards W (wide angle) to
adjust the zoom for recording. When you want
to record a subject at close range, move the
power zoom lever to W (wide angle), then
adjust the focus.
The focal distance information (the distance at
which the subject is focused on, for when it is
dark and hard to adjust focus) appears for a few
seconds in the following cases; (It will not be
displayed correctly if you are using a conversion
lens (optional).)
When the focus mode is switched from
automatic to manual.
When you set focus manually.
You can select and adjust the focal point to
aim it at a subject not located at the center
of the screen.
1 Touch the subject on the screen.
9 appears.
2 Touch [END].
To adjust the focus automatically, touch
[AUTO] t [
END] in step 1.
b Notes
If you set [SPOT FOCUS], [FOCUS] is
automatically set to [MANUAL].
This is useful to shoot small subjects, such
as flowers or insects. You can blur out
backgrounds and the subject stands out
clearer.
When you set [TELE MACRO] to [ON]
( ), the zoom (p. 25) moves to the top of
the T (telephoto) side automatically and
allows recording subjects at a close distance
as follows;
DCR-SR32E/SR33E/SR42E:
down to about 43 cm (17 in.)
DCR-SR52E/SR62E/SR72E/SR82E:
down to about 38 cm (15 in.)
DCR-SR190E/SR200E:
down to about 37 cm (14 5/8 in.)
DCR-SR290E/SR300E:
down to about 45 cm (17 3/4 in.)
FOCUS
SPOT FOCUS
TELE MACRO
68
To cancel, touch [OFF], or zoom to wide-
angle (W side).
b Notes
When recording a distant subject, focusing may
be difficult and can take some time.
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
You can fix the brightness of an image
manually. When the subject is too much
brighter or gloomier than the background,
adjust [EXPOSURE].
1 Touch [MANUAL].
appears.
2 Adjust the exposure by touching /
.
3 Touch .
To return the setting to automatic exposure,
touch [AUTO] t in step 1.
You can adjust and fix the exposure to the
subject, so that it is recorded in suitable
brightness even when there is strong
contrast between the subject and the
background, such as subjects in the
spotlight on stage.
1 Touch the point where you want to fix and
adjust the exposure on the screen.
appears.
2 Touch [END].
To return the setting to automatic exposure,
touch [AUTO] t [
END] in step 1.
b Notes
If you set [SPOT METER], [EXPOSURE] is
automatically set to [MANUAL].
You can record images effectively in
various situations with the [SCENE
SELECTION] function.
B AUTO
Select this to automatically record images
effectively without the [SCENE
SELECTION] function.
TWILIGHT* ( )
Select this to take night view without
losing the mood.
TWILIGHT PORT. ( )
Select this to take subject in foreground
against night view (DCR-SR190E/
SR200E/SR290E/SR300E).
CANDLE ( )
Select this to take scene without losing
candle mood.
SUNRISE&SUNSET* ( )
Select this to reproduce the atmosphere of
scenes such as sunsets or sunrises.
EXPOSURE
SPOT METER (Flexible
spot meter)
SCENE SELECTION
69
Customizing your camcorder
FIREWORKS* ( )
Select this to take spectacular shots of
fireworks.
LANDSCAPE* ( )
Select to shoot distant subjects clearly.
This setting also prevents your camcorder
from focusing on glass or metal mesh in
windows that comes in between the
camcorder and the subject.
PORTRAIT ( )
Select to bring out the subject such as
people or flowers while creating a soft
background.
SPOTLIGHT** ( )
Select to prevent people’s faces from
appearing excessively white when subjects
are lit by strong light.
SPORTS** ( )
Select to minimize shake when shooting
fast moving subjects (DCR-SR32E/
SR33E/SR42E/SR52E/SR62E/SR72E/
SR82E).
BEACH** ( )
Select to take the vivid blue of the ocean or
a lake.
SNOW** ( )
Select to take bright pictures of a white
landscape.
* Your camcorder is set to focus only on distant
subjects.
** Your camcorder is set not to focus on nearby
subjects.
b Notes
The [WHITE BAL.] setting is cleared when you
set [SCENE SELECTION].
You can adjust the color balance to the
brightness of the recording environment.
B AUTO
The white balance is adjusted
automatically.
OUTDOOR ( )
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Outdoors
– Night views, neon signs and fireworks
– Sunrise or sunset
– Under daylight fluorescent lamps
INDOOR (n)
The white balance is adjusted to be
appropriate for the following recording
conditions:
– Indoors
– At party scenes or studios where the lighting
conditions change quickly
– Under video lamps in a studio, or under
sodium lamps or incandescent-like color
lamps
ONE PUSH ( )
The white balance will be adjusted
according to the ambient light.
1 Touch [ONE PUSH].
WHITE BAL. (White
balance)
70
2 Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will shoot
the subject.
3 Touch [ ].
flashes quickly. When the white
balance has been adjusted and stored in
the memory, the indicator stops
flashing.
b Notes
Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
When you select [ONE PUSH], keep framing
white object while is flashing quickly.
flashes slowly if [ONE PUSH] could not
be set.
When [ONE PUSH] was selected, if keeps
flashing after touching , set [WHITE BAL.]
to [AUTO].
If you change the [WHITE BAL.] settings, the
[SCENE SELECTION] settings return to
[AUTO] automatically.
z Tips
If you changed the battery pack, or moved your
camcorder to or from outdoors when [AUTO]
was selected, aim your camcorder at a nearby
white object with [AUTO] for about 10 seconds
for better color balance adjustment.
If you change the [SCENE SELECTION]
settings or move your camcorder outdoors
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
b Notes
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
When the (Still) lamp is lit, this item is
available for DCR-SR190E/SR200E/SR290E/
SR300E only.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot plus
recording if you set [S. NIGHTSHOT PLS]
to [ON] while the NIGHTSHOT PLUS
switch (p. 27) is also set to ON.
appears on the screen.
To return to the normal setting, set [S.
NIGHTSHOT PLS] to [OFF].
b Notes
Do not use [S. NIGHTSHOT PLS] in bright
places. This may cause a malfunction.
Do not cover the infrared port with your fingers
or other objects.
Remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 27) is also set to
ON.
appears on the screen.
To return to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
COLOR SLOW SHTR
(Color Slow Shutter)
S. NIGHTSHOT PLS
(Super NightShot plus)
(DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/
SR72E/SR82E)
SUPER NIGHTSHOT
(DCR-SR190E/SR200E/
SR290E/SR300E)
71
Customizing your camcorder
b Notes
Do not use [SUPER NIGHTSHOT] in bright
places. This may cause a malfunction.
Do not cover the infrared port with your fingers
or other objects.
Remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
You can record a transition with the
following effects adding to the interval
between scenes.
1 Select the desired effect in [STBY] (during
fading in) or [REC] (during fading out)
mode, then touch .
2 Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step 1.
If you press START/STOP, the setting is
canceled.
WHITE FADER
BLACK FADER
When you select [OLD MOVIE],
appears and you can add an old movie
effect to images.
To cancel [D.EFFECT], touch [OFF].
You can add special effects to an image
during recording or playback. appears.
B OFF
Does not use [PICT.EFFECT] setting.
SEPIA
Images appear in sepia.
B&W
Images appear in black and white.
PASTEL
Images appear as a pale pastel drawing.
You can select the microphone level for
recording sound.
Select [LOW] when you want to record
exciting and powerful sound in a concert
hall, etc.
B NORMAL
Records various surround sounds,
converting them into the certain level.
LOW ( )
Records surround sound faithfully. This
setting is not suitable for recording
conversations.
You can record a still image after about 10
seconds.
Press PHOTO when [SELF-TIMER] is set
to [ON], and appears.
To cancel the count down, touch [RESET].
To cancel the self-timer, select [OFF].
z Tips
You can also operate by pressing PHOTO on
the Remote Commander (p. 122) (except for
DCR-SR32E/SR33E/SR42E).
FADER
D.EFFECT (Digital effect)
Fading out Fading in
PICT.EFFECT (Picture
effect)
MICREF LEVEL
SELF-TIMER
72
You can set this function when you use an
external flash (optional) that is compatible
with your camcorder. Attach the external
flash to the Active Interface Shoe (p. 120).
B ON ( )
Flashes every time.
AUTO
Flashes automatically.
FLASH MODE
(DCR-SR52E/SR62E/
SR72E/SR82E)
73
Performing with a computer
Performing with a computer
What you can do with Windows computer
When you install the “Picture Motion
Browser” on a Windows computer from the
supplied CD-ROM, you can enjoy the
following operations.
b Notes
The supplied software is not compatible with a
Macintosh.
x Creating a DVD using the One
Touch Disc Burn function (p. 77)
You can save images recorded on the hard
disk of your camcorder on a DVD by
pressing DISC BURN button on your
Handycam Station (One Touch Disc Burn
function).
It is an simple operation to save images to
a DVD.
x Importing images recorded on the
hard disk of your camcorder to a
computer (p. 81)
You can import images recorded on the
hard disk of your camcorder to a computer
with a simple operation.
x Deleting images recorded on the
hard disk of your camcorder by a
computer (DCR-SR42E/SR62E/
SR82E/SR200E/SR300E) (p. 85)
You can delete images recorded on the
hard disk of your camcorder by using a
computer.
x Viewing images imported to a
computer (p. 86)
You can manage images recorded on the
hard disk of your camcorder by date, and
select images you want to view as
thumbnails.
These thumbnails can be enlarged and
played in a slide show.
x Creating a DVD with edited images
You can edit images imported to a
computer (p. 88).
You can create a DVD with selected
images (p. 90).
x Creating a DVD with movies
included in a Playlist on your
camcorder (p. 91)
You can save movies included in a Playlist
on your camcorder on a DVD with a
simple operation.
x Copying a DVD
t Video Disc Copier (p. 92)
You can copy a DVD you created as it is.
The Help guide explains all the functions of
all the software applications. Refer to the
Help guide for further detailed operations
after reading this Handbook thoroughly.
To display the Help guide, click the
mark on the screen.
Main functions
About the help function of the
software
74
System requirements
OS: Microsoft Windows 2000 Professional,
Windows XP Home Edition, Windows XP
Professional, or Windows XP Media
Center Edition
Standard installation is required.
Operation is not assured if the above OS
has been upgraded or in a multi-boot
environment.
CPU: Intel Pentium III 1 GHz or faster
Application: DirectX 9.0c or later (This
product is based on DirectX technology. It
is necessary to have DirectX installed.)
Sound system: Direct Sound compatible
sound card
Memory: 256 MB or more
Hard disk: Available free hard disk space for
installation required: Approximately
600 MB (for creating a DVD, 5 GB or
more may be required)
Display: DirectX 7 or later-compatible video
card, Minimum 1024 × 768 dots, High
Color (16 bit color)
Others: USB port (this must be provided
as standard), DVD burner (CD-ROM drive
is necessary for installation)
OS: Microsoft Windows 2000 Professional,
Windows XP Home Edition, Windows XP
Professional or Windows XP Media Center
Edition
Standard installation is required.
Operation is not assured if the above OS
has been upgraded.
CPU: MMX Pentium 200 MHz or faster
Others: USB port (this must be provided
as standard)
b Notes
Even in a computer environment where the
operations are guaranteed, frames may be
dropped from movies, resulting in uneven
playback. However, imported images and
images on a DVD created subsequently will not
be affected.
Operations are not guaranteed, even on
computers fulfilling the above system
requirements.
Picture Motion Browser does not support 5.1ch
surround sound reproduction. The sound is
reproduced in 2ch sound.
If you use a Notebook computer, connect it to
the AC Adaptor as the power source. Otherwise,
the software will not work properly due to the
power saving function of the computer.
z Tips
If your computer has a Memory Stick slot, insert
the “Memory Stick Duo” on which still images
are recorded into the Memory Stick Duo
Adaptor (optional), then insert it into the
Memory Stick slot on your computer to import
still images to the computer.
When using a “Memory Stick PRO Duo” and
your computer is not compatible with it, connect
your camcorder with the USB cable instead of
using the Memory Stick slot on the computer.
Use a special caution for preventing
damages and malfunctions of the
camcorder
When connecting your camcorder with the USB
cable or other cable, make sure you insert the
connector in the correct direction. Do not insert
the connector forcibly as it may damage the
cable or your camcorder.
Be sure to use the supplied software when
operating images recorded on the camcorder
through a computer.
On screenshots
The screenshots are from Windows XP. The
scenes may vary depending on the operating
system of the computer.
On screenshots in this Handbook, the
application for English version is used. When
you install the application, you can select other
language (p. 75).
When using Picture Motion Browser
When playing still images recorded
on a “Memory Stick Duo” with a
computer
75
Performing with a computer
Installing the software
You need to install the software to your
Windows computer before connecting
your camcorder to the computer. The
installation is required only for the first
time.
Provide the camcorder and the Handycam
Station, and a USB cable beforehand.
Contents to be installed and procedures
may differ depending on your OS.
1 Confirm that your camcorder is
not connected to the computer.
2 Turn on the computer.
b Notes
Log on as Administrators for installation.
Close all applications running on the computer
before installing the software.
3 Place the supplied CD-ROM in the
disc drive of your computer.
The installation screen appears.
If the screen does not appear
1 Click [Start], then click [My
Computer]. (For Windows 2000,
double-click [My Computer].)
2 Double-click [SONYPICTUTIL (E:)]
(CD-ROM) (disc drive).*
* Drive names (such as (E:)) may vary
depending on the computer.
4 Click [Install].
5 Select the language for the
application to be installed, then
click [Next].
6 Check your area and country/
region, then click [Next].
b Notes
The software is set up for your selected country/
region.
7 Read [License Agreement], select
[I accept the terms of the license
agreement] when you agree, then
click [Next].
8 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
9 Connect the Handycam Station to
your computer using the supplied
USB cable, then click [Next] on
the connection confirmation
screen.
Even if a screen prompting you to
restart your computer appears, you do
not need to restart it at this time. Restart
your computer after completing the
installation.
76
10
Follow the on-screen instructions
to install the software.
Depending on the computer, you may
need to install third party software
(shown below). If the installation screen
appears, follow the instructions to
install the required software.
x Windows Media Format 9 Series
Runtime (Windows 2000 only)
Software required to create a DVD
x Microsoft DirectX 9.0c
Software required to handle movies
Restart the computer if required to
complete the installation.
The short-cut icons, such as [ ] (Picture
Motion Browser), appear on the desktop.
11
Remove the CD-ROM from the
disc drive of your computer.
z Tips
For disconnecting the USB cable, see page 79.
After you install the software,
a shortcut icon for the
customers registration website
is created on the desktop.
Once you register on the website, you
can get secure and useful customer
support.
http://www.sony.net/registration/di/
For the information about Picture
Motion Browser, visit the following
URL:
http://www.sony.net/support-disoft/
77
Performing with a computer
Creating a DVD with One Touch
The kinds of DVD that you can use with the
supplied software are as listed below. The
DVDs you can use differ, depending on the
computer you use. For details on the DVDs
compatible with your computer, refer to the
operations manual supplied with your
computer. You may not be able to play back
some types of DVDs, depending on the
device you have. Refer to the specifications
of your playback equipment for additional
compatibility information.
8 cm DVDs are not supported.
When saving data on a DVD+RW, the data is
recorded in VIDEO format. You cannot add
more data on the DVD+RW.
Use a DVD produced by a reliable
manufacturer. You may not save images
correctly when using a low quality DVD.
You can save images recorded on the hard
disk of your camcorder on a DVD in your
computer by pressing DISC BURN button
on the Handycam Station (One Touch Disc
Burn function) without any complex
operations on your computer. The images
that have not yet been saved on a DVD with
One Touch Disc Burn can automatically be
saved on a DVD.
z Tips
The image data previously saved on a DVD in
this operation cannot be saved again with the
same operation. To save data on a DVD again
after it has been saved previously, import the
images to a computer (p. 81). Then, save the
data on a DVD, following the instructions in
“Creating and copying a DVD” (p. 90).
The history of each saved image is recorded
according to the user account. If you use a
different user account, the image that has
already been saved to a DVD is written to the
DVD again.
If you cannot save all your image data on a
DVD, the data is automatically saved on more
than one DVD. The required number of DVDs
is displayed in step
7 on the screen.
Still images are recorded first on a DVD. When
you save images on several DVDs, the still
images are recorded on the first DVD.
The sound quality remains as it is when you
save a movie recorded in 5.1ch surround sound
on a DVD (DCR-SR190E/SR200E/SR290E/
SR300E).
b Notes
Still images on a DVD created with One Touch
Disc Burn function cannot be played back on a
DVD player. Play them back on a computer.
1 Confirm that the Handycam
Station is not connected to the
computer.
Types of DVDs you can use
DVD types Characteristics
DVD-R
Unrewritable
Fairly inexpensive. Mainly
used for saving data
Compatible with most DVD
players
DVD+R
Unrewritable
DVD+R DL
Using the double layer
DVD+R system containing
more recordable capacity
Unrewritable
DVD-RW
Rewritable and reusable
DVD+RW
Rewritable and reusable
Saving images on a DVD with One
Touch (One Touch Disc Burn)
78
2 Turn on the computer.
3 Place the recordable DVD to be
saved in the DVD drive of your
computer.
z Tips
It is recommended that you use a new
recordable DVD.
If any software starts on the computer
automatically, close it.
4 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
5 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
z Tips
You can perform this operation, whichever
position of the (Movie)/ (Still) lamp is
lit.
6 Press DISC BURN button on the
Handycam Station.
7 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The DVD recognition window is
displayed on the computer screen.
When the DVD type is recognized,
DVD creation begins.
b Notes
When connecting your camcorder to a
computer, make sure you insert the connector in
the correct direction. Do not insert the connector
forcibly as it may damage the cable, the
Handycam Station or your computer.
z Tips
Your camcorder is compatible with Hi-Speed
USB (USB 2.0). You can transfer data at a faster
rate using a computer compatible with Hi-Speed
USB (USB 2.0). When you connect a USB
interface not compatible with Hi-Speed USB
(USB 2.0), the data transfer ratio will be that of
USB 1.1 (USB Full-Speed).
79
Performing with a computer
ACurrent status of all DVD creation
BCurrent status per DVD
CNumber of DVDs required
DNumber of DVDs being created
When the DVD creation is completed,
the disc tray opens automatically.
b Notes
During DVD creation, do not apply vibration to
the camcorder. The DVD creation may be
terminated.
Make sure no other USB devices are connected
to your computer.
z Tips
When you insert a burned DVD-RW/DVD+RW
in the DVD drive in step
3, a message appears,
asking if you want to delete data saved on a
DVD.
When you cannot store all the recordable data
on a DVD, follow the on-screen instructions,
then insert a new DVD onto the DVD drive.
8 Once the completion dialog for
DVD creation appears, click
[Close] on the computer screen.
To create another DVD, click [Copy].
z Tips
You can also create a DVD by selecting [DISC
BURN] on the [USB SELECT] screen of your
camcorder (p. 80).
You can also create a DVD by selecting [One
Touch Disc Burn] in the HDD Handycam
Utility (p. 80).
To disconnect the USB cable
1 Touch [END] on the LCD screen of
your camcorder.
2 Click the [Unplug or eject hardware]
icon on the task tray.
3 Click [Safely remove USB Mass
Storage Device].
4 Touch [YES] on the LCD screen of your
camcorder.
5 Disconnect the USB cable from the
Handycam Station and the computer.
b Notes
Do not disconnect the USB cable while the
ACCESS lamp is lit.
Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the hard disk of your camcorder or in a
“Memory Stick Duo” may not be updated
correctly. Also, disconnecting the USB cable
improperly may cause a malfunction of the hard
disk of your camcorder or of the “Memory Stick
Duo.”
80
After creating a DVD
After creating a DVD, check that the DVD can
be played back properly on a DVD player or
other devices.
When you cannot play back the DVD properly,
import the images to the computer by following
the steps on page 81.
Then save the data on a DVD, following the
instructions in “Creating and copying a DVD”
(p. 90).
If you check that the DVD can be played back
properly, it is recommended that you delete the
images from the camcorder using the functions
on the camcorder by following the steps on page
38. In this way, you can increase the free hard
disk space of your camcorder.
To copy a created DVD, use the supplied DVD
copy software (p. 92).
You cannot save the images on the hard disk of
your computer in this operation.
You cannot delete the images on the hard disk
of the camcorder in this operation.
You cannot edit the images on the created DVD
with a computer. When you want to edit the
images with the computer, import the images
onto the computer first (p. 81).
If DVD creation ends unexpectedly, the last
correctly saved file is completed. When you
create a DVD with the One Touch Disc Burn
function next time, the image data file that has
not yet been saved on the DVD will be the first
one to be saved.
The images that have been imported to a
computer using Easy PC Back-up, can be saved
on a DVD with the One Touch Disc Burn
function.
To perform [DISC BURN] on the [USB
SELECT] screen of your camcorder
1 Turn on the computer.
2 Place the recordable DVD to be saved in
the DVD drive of your computer.
3 Connect the Handycam Station to the
wall socket using the supplied AC
Adaptor.
4 Set the camcorder onto the Handycam
Station, then turn the POWER switch to
turn on.
5 Connect the (USB) jack of the
Handycam Station to a computer using
the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
6 Touch [DISC BURN] on the LCD
screen of your camcorder.
The DVD recognition window is
displayed on the computer screen.
When the DVD type is recognized,
DVD creation begins.
To perform [One Touch Disc Burn] on
the HDD Handycam Utility of a
computer
1 Turn on the computer.
2 Place the recordable DVD to be saved in
the DVD drive of your computer.
3 Connect the Handycam Station to the
wall socket using the supplied AC
Adaptor.
4 Set the camcorder onto the Handycam
Station, then turn the POWER switch to
turn on.
5 Connect the (USB) jack of the
Handycam Station to a computer using
the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
6 Touch [ COMPUTER] on the LCD
screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
81
Performing with a computer
7 Click [One Touch Disc Burn] in the
[HDD Handycam Utility] window on
the computer screen.
8 Click [Start].
The DVD recognition window is
displayed on the computer screen.
When the DVD type is recognized,
DVD creation begins.
To customize the settings of the DVD
drive used for creating a DVD
1 Click [Settings...] in step 7 in “To
perform [One Touch Disc Burn] on the
HDD Handycam Utility of a computer”.
ADrive settings
Select the drive you want to use to
create a DVD.
BLocation for temporary files
Specify a folder to be used to save
temporary files in the window
displayed when [Browse] is clicked.
CWriting speed
Select [Optimum Speed] for normal
usage. If DVD creation failure persists,
select lower speed.
2 Click [OK] when the setting is
completed.
Importing images to a
computer
You can view and edit images imported
from the camcorder to the computer. Also,
you can create a DVD with the imported
materials. To import images from the
camcorder, use [Easy PC Back-up], [Media
File Import], etc.
You can import images recorded on the
hard disk of your camcorder to a computer
with a simple operation using the Easy PC
Back-up function of the HDD Handycam
Utility. The images recorded on the hard
disk of your camcorder that have not yet
been imported to a computer can
automatically be imported to your
computer.
1 Turn on the computer.
2 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
3 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
4 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
Importing entire images to a
computer (Easy PC Back-up)
82
5 Touch [ COMPUTER] on the
LCD screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
6 Click [Easy PC Back-up] in the
[HDD Handycam Utility] window
on the computer screen.
7 Select the type of image file and
the destination folder.
AImporting file type
Select if you want to import movies and
still images individually. In the default
setting, both the movies and still
images are set to be imported.
BThe destination folder
To change the destination folder to save
the imported images, click [Change].
The default destination is set as the [My
Pictures] folder.
8 Click [Import].
The image that have not been imported
to a computer are automatically
imported to your computer.
When the import of the data is
completed, [Picture Motion Browser]
starts up automatically and the imported
images are displayed in the window.
b Notes
While importing images, do not apply vibration
on the camcorder. The importing may be
terminated.
You can import selected images on your
camcorder to a computer with [Media File
Import] on the HDD Handycam Utility.
1 Turn on the computer.
2 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
3 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
Importing selected images to a
computer (Media File Import)
83
Performing with a computer
4 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
5 Touch [ COMPUTER] on the
LCD screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
6 Click [Media File Import] in the
[HDD Handycam Utility] window
on the computer screen.
The image select window for importing
is displayed.
Movies and still images recorded on the
camcorder are displayed as thumbnails
on each tab.
7 To import movies, click [Movies]
tab, or to import still images, click
[Still images] tab.
AMovies
BStill images
8 Select the images you want to
import.
Click the check box at the top left on the
thumbnails of movies and still images
you want to import. If you want to
import all the images on selected tab,
click [ ] (Select All).
z Tips
By switching the tabs, you can select both
movies and still images at the same time.
To change the destination, click [Change], then
select the desired folder. The default destination
is set as [My Pictures]. You can change the
destination where imported files will be saved
by selecting a folder from among those
registered as [Viewed folder] in the window that
is displayed when you click [Change].
9 Click [Import].
The import of selected images starts.
To import still images using the
Memory Stick slot of a computer
You can import still images recorded on a
“Memory Stick Duo” by inserting the
“Memory Stick Duo” into the Memory
Stick slot of a computer.
84
z Tips
You can import the still images recorded on a
“Memory Stick Duo” with connecting your
camcorder and a computer (p. 84).
1 Turn on the computer.
2 Insert a recorded “Memory Stick Duo”
into the Memory Stick slot of your
computer.
3 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
4 Click [ ].
Or, select [Import Media Files] in the
[File] menu.
5 Click [Digital Still Camera/Memory
Stick (DCF Format)] t [OK].
The window to used to select the drive/
folder for the still images to be imported
from/to is displayed.
6 Select the medium holding the still
images you want to import.
7 Select the destination folder to save the
imported still images.
z Tips
The default destination is set as [My Pictures].
You can change the destination where imported
files will be saved by selecting a folder from
among those registered as [Viewed folder] in
the window that is displayed when you click
[Change].
8 Click [Import].
The import of the selected still images
starts.
To import still images from the
“Memory Stick Duo” to a computer
via a USB cable
You can import the still images recorded on
the “Memory Stick Duo” to a computer
with connecting your camcorder and a
computer.
1 Turn on the computer.
2 Connect the Handycam Station to the
wall socket using the supplied AC
Adaptor.
3 Set the camcorder onto the Handycam
Station, then turn the POWER switch to
turn on.
4 Connect the (USB) jack of the
Handycam Station to a computer using
the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
5 Touch [ COMPUTER] on the LCD
screen of your camcorder.
The importing image window is
displayed on the computer screen.
6 Select the drive that the images
recorded.
7 Select the destination folder to save the
imported still images.
8 Click [Import].
The import of selected still images to
the selected folder starts.
On destination folders
The images are imported to the date folders
(named with the date imported) created in
the [My Pictures] folder in the default
setting.
85
Performing with a computer
Deleting images recorded on the camcorder
through the computer (DCR-SR42E/SR62E/
SR82E/SR200E/SR300E)
You can delete images recorded on the
camcorder using Picture Motion Browser.
b Notes
This function is not available for DCR-SR32E/
SR33E/SR52E/SR72E/SR190E/SR290E.
You cannot restore images once they are
deleted.
You cannot delete images recorded on the
“Memory Stick Duo” using this function.
1 Turn on the computer.
2 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
3 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
4 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
5 Touch [ COMPUTER] on the
LCD screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
6 Click [Delete Media Files from
Handycam] in the [HDD
Handycam Utility] window on the
computer screen.
The image select window is displayed.
Movies and still images recorded on the
camcorder are displayed as thumbnails
on each tab.
AMovies
BStill images
7 To delete movies, click [Movies]
tab, or to delete still images, click
[Still images] tab.
8 Select the images you want to
delete.
Click the check box at the top left on the
thumbnails of movies and still images
you want to delete.
9 Click [Delete].
The deleting confirmation screen
appears.
10
Click [Yes].
z Tips
For disconnecting the USB cable, see page 79.
86
Viewing images imported to a computer
You can browse images imported to a
computer, sorted by registered folder
(Folder view), or sorted by the date and
time they were recorded (Calendar view).
1 Turn on the computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Click [Folders] or [Calendar] on
the Folder/Calendar switching
tab.
When you click [Folders], a list of
registered folders is displayed.
When you click [Calendar], the years
and months that have images are
displayed in a list on a calendar tree.
4 Click the folder, or click the year
and month of recording images
you want to view.
When you click the folder, thumbnails
of images stored in the selected folder
are listed.
When you click the year and month, a
calendar is displayed. In the date box of
the calendar, thumbnails of images
recorded on that date are displayed.
When you click the folder
When you click the month icon
z Tips
When you click the month on the yearly
calendar, the calendar switches to the selected
month.
When you click the date on a monthly calendar,
the calendar switches to a time calendar for the
selected date. Thumbnails of the images
recorded on that day are displayed, arranged
according to the hour they were recorded.
87
Performing with a computer
To enlarge an image
Double-click the thumbnail.
The view image window starts up and the
selected image is enlarged.
When you select a movie, the slider and the
playback control buttons appear and
playback starts.
When you select a still image
When you select a movie
To playback images continuously
You can playback images continuously as a
slide show. Here we explain the procedure
for starting a slide show by selecting
images in the Calendar view.
1 Turn on the computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Click [Calendar] on the Folder/Calendar
switching tab.
4 Click the date when the image you want
to view in the slide show is recorded.
A list of images recorded on the selected
date is displayed.
5 Select the images.
The selected images are marked with a
blue frame.
To select listed images in the image display
area on the main window, click the first
thumbnail, then press and hold down [Shift]
key and click the last thumbnail.
To select two or more random images, press
and hold down [Ctrl] key while clicking
thumbnails.
6 Click [ ].
The selected image is displayed full
screen, and a slide show starts.
If you move the mouse while the slide
show is playing, a setting bar for
controlling the playback is displayed
and you can control playback and adjust
the volume.
To delete unnecessary image from the
computer
1 Right-click the thumbnail of the image
you want to delete.
2 Click [Delete] t [Yes].
88
Editing the imported images
You can cut out only required movie parts
to save.
1 Turn on the computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Select the movie you want to edit
in the Folder view or Calendar
view (p. 86).
4 Click [ ] and select [Video
Trimming].
The Video Trimming window is
displayed.
z Tips
You can display the Video Trimming window
by selecting [Video Trimming] from the
[Manipulate] menu in the Main window, or
clicking [ ] in the view image window and
selecting [Video Trimming].
5 Select the scene you want to set
as an IN point (the beginning of
the required part) using the [c],
[C] buttons on the right side of
the window, or the slider, and
click [Set IN point].
The selected scene is displayed in the
thumbnail of [IN point].
6 Select the scene you want to set
as an OUT point (the end of the
required part) in the same way,
and click [Set OUT point].
The selected scene is displayed in the
thumbnail of [OUT point].
7 After setting the points, click
[Save Edited Video].
The Save Video window is displayed.
The edited movie file will be saved with
a file name different from that of the
original file name.
Editing movies
89
Performing with a computer
8 Click [Save] to save the edited
movie.
Saving takes some time. When the
saving is completed, a message is
displayed. Click [OK].
To capture still images from a movie
Click [Save Frame] in the Video Trimming
window to save the current frame as a still
image. The file of the still image is saved in
the same folder as the original movie.
z Tips
Still images are saved in high resolution. By
clicking [Settings] on the window displayed
after you click [Save Frame], you can adjust the
settings for noise reduction and color correction.
You can edit imported still images as
follows. For details about the operation,
refer to the Picture Motion Browser Help.
Automatic Correction
Automatically corrects the brightness
and contrast to the most suitable levels
for that image.
Correcting brightness and contrast
The brightness and contrast of still
images can be corrected. You can also
correct only dark or light areas.
Correcting saturation
Adjusts the saturation of images.
Adjusting sharpness
Emphasizes the outline of images.
Adjusting with the tone curve
The histogram and tone curve for the
channel being displayed in the drop-
down list are shown. You can adjust the
tone curve for each channel.
Red-eye Reduction
If the red-eye is caused by shooting a
person with flash, you can correct the
red-eye portion of the still image. You
can correct and remove the red-eye
portion of still images.
Trimming
You can edit still images and use only
the parts of the image you want.
Resizing
You can resize still images and save
them to the desired folder.
Changing the date and time stamp
You can change the date and time stamp
of still images in a batch.
Inserting date
You can insert a date stamp into still
images.
Editing still images
90
Creating and copying a DVD
You can create a DVD Video with a DVD
menu by putting images on your computer
as materials.
z Tips
The selected movies are written to the DVD as
they are. If there are unnecessary scenes in the
movie, edit it beforehand (p. 88).
1 Turn on the computer, and place
the recordable DVD to be saved in
the DVD drive of your computer.
2 Double-click [ ] (Picture Motion
Browser) on the desktop.
[Picture Motion Browser] starts up.
3 Select the images you want to
write to the DVD in the Folder
view or Calendar view (p. 86).
You can select two or more images, or
select images by folder or date.
z Tips
To select listed images in the image display area
on the main window, click the first thumbnail,
then press and hold down [Shift] key and click
the last thumbnail.
To select two or more random images, press and
hold down [Ctrl] key while clicking thumbnails.
4 Select [DVD-Video Creation] in
the [Manipulate] menu.
The window used to select images is
displayed.
5 Confirm the images to write to the
DVD.
z Tips
Double-click a thumbnail to playback the
image.
To add images to the previously selected ones,
select the images you want to add in the image
display area on the main window and drag and
drop onto this window.
6 Click [Next].
Menu selection window of the DVD is
displayed.
7 Select menu design and a title
creation method, and enter the
DVD name.
Image of DVD video menu to create is
displayed.
Creating a DVD with selected
images
91
Performing with a computer
z Tips
Selecting [Menu Sorted by Date Taken] in the
Menu structure drop-down list automatically
changes the order of movies and still images
into the order of date on which they were
recorded.
Clicking [Font] lets you select the text color of
the DVD name and title, etc.
Clicking [Preview] lets you check the
completion image of the DVD video to create.
Clicking [Settings] lets you set the various
operations that take place upon the first play of a
DVD, movie quality, and display time for each
still image in slide show.
8 Click [Start].
The images are written to the DVD.
z Tips
You can choose to create more copies of the
same DVD after writing to the DVD is
completed.
You can save movies listed in a Playlist on
the hard disk of your camcorder on a DVD
using [Playlist Disc Creation] in the HDD
Handycam Utility.
1 Turn on the computer.
2 Place the recordable DVD to be
saved in the DVD drive of your
computer.
3 Connect the Handycam Station to
the wall socket using the supplied
AC Adaptor.
4 Set the camcorder onto the
Handycam Station, then turn the
POWER switch to turn on.
5 Connect the (USB) jack of the
Handycam Station to a computer
using the supplied USB cable.
The [USB SELECT] screen is displayed
on the LCD screen of your camcorder.
For connecting with the USB cable, see
page 78.
6 Touch [ COMPUTER] on the
LCD screen of your camcorder.
The [HDD Handycam Utility] window
is displayed on the computer screen.
7 Click [Playlist Disc Creation] in
the [HDD Handycam Utility]
window on the computer screen.
8 Click [Start].
The movies listed in a Playlist on your
camcorder are displayed as thumbnails.
Saving movies in the Playlist to a
DVD
92
9 Confirm the movies to write to a
DVD.
The movies with checkmarks at the top
right are written on the DVD in the
Playlist order.
10
Click [Next].
The menu selection window of the DVD
is displayed.
11
Select a menu design and a title
creation method, and enter the
DVD name.
Image of DVD video menu to create is
displayed.
z Tips
Selecting [Menu Sorted by Date Taken] in the
Menu structure drop-down list automatically
changes the order of movies and still images
into the order of date on which they were
recorded.
Clicking [Font] lets you select the text color of
the DVD name and title, etc.
Clicking [Preview] lets you check the
completion image of the DVD video to create.
Clicking [Settings] lets you set the various
operations that take place upon the first play of a
DVD, movie quality, and display time for each
still image in slide show.
12
Click [Start].
DVD creation starts.
z Tips
You can choose to create more copies of the
same DVD after writing to the DVD is
completed.
You can copy the images recorded on a
DVD to another DVD.
You can also back up a DVD.
This procedure describes how to copy the
images recorded on a DVD-RW (12 cm) to
a DVD-R (12 cm) in the DVD drive of your
computer.
1 Turn on the computer.
2 Insert a recorded DVD into the
DVD drive of your computer.
3 Click [Start] t [All Programs] (for
Windows 2000, click [Programs])
t [Sony Picture Utility] t [Video
Disc Copier] on your computer.
Disc copy window is displayed.
4 Select a DVD drive for [Source:]
and [Copy to:].
The status of the drive and DVD is
displayed. Depending on the status,
copying cannot start. Follow the
instruction to change the DVD.
Obtaining information from a DVD of
your computer takes time. Wait until the
DVD information is displayed in the
window.
Copying a DVD
93
Performing with a computer
5 When preparations for copying
are completed, click [Start].
DVD copy starts.
z Tips
You can choose to create more copies of the
same DVD after writing to the DVD is
completed.
To change the location for temporary
files and the writing speed
On the Disc copy window, click [Settings].
Select [Manually select a writing speed
before writing to the disc] and click [OK] to
specify the writing speed each time, before
writing starts.
z Tips
Depending on the capacity of the source DVD,
the free space required on your hard disk for
temporary files varies.
Manipulating still
images
You can manipulate imported still images
as follows. For details about the operation,
refer to the Picture Motion Browser Help.
You can print imported still images.
You can also print still images with the date
information.
z Tips
You can save a scene you select from the movie
as a still image and print it.
You can start your e-mail software, attach
still images to e-mail and send them via e-
mail.
b Notes
MAPI must be enabled in your e-mail software
for this feature to work. Refer to the user manual
or help files of your e-mail software for more
information about MAPI.
Movie data files cannot be sent by e-mail.
You can start a commercially available
application via Picture Motion Browser and
view images with these applications.
Printing still images
Sending still images by e-mail
Opening with external
applications
94
Troubleshooting
Troubleshooting
If you run into any problems using your
camcorder, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.
Overall operations/Easy Handycam
operation/Remote Commander .............94
• Batteries/Power sources ........................95
• LCD screen............................................96
“Memory Stick Duo” ............................96
• Recording ..............................................97
Playing back images on your
camcorder ............................................99
Editing images on your camcorder
........100
Dubbing/Connecting to other
devices ...............................................100
• Connecting to a computer ...................100
Functions that cannot be used
simultaneously.....................................102
Notes before sending your camcorder
for repair
• Your camcorder may be required to
initialize or change the current hard disk
of the camcorder, depending on the
problem. In the event of this, the data
stored on the hard disk will be deleted. Be
sure to save the data on the internal hard
disk (p. 37) on other media (backup)
before sending your camcorder for repair.
We will not compensate you for any loss
of hard disk data.
• During repair, we may check a minimum
amount of data stored on the hard disk in
order to investigate the problem.
However, your Sony dealer will neither
copy nor retain your data.
The power does not turn on.
Attach a charged battery pack to the
camcorder (p. 13).
Connect the plug of the AC Adaptor to the
wall socket (p. 13).
Set the camcorder onto the Handycam
Station securely (p. 13).
The camcorder does not operate
even when the power is set to on.
It takes a few seconds for your camcorder
to be ready to shoot after the power is
turned on. This is not a malfunction.
Disconnect the AC Adaptor from the wall
socket or remove the battery pack, then
reconnect it after about 1 minute. If the
functions still do not work, press the
RESET button (p. 119) using a sharp-
pointed object. (If you press the RESET
button, all settings, including the clock
setting, are reset.)
The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off the camcorder and
take it to a warm place. Leave the
camcorder there for a while, then turn on
the camcorder.
Buttons do not work.
During Easy Handycam operation, the
following buttons/functions are not
available.
– BACK LIGHT button (p. 28)
– Playback zoom (p. 33)
– To turn on and off the LCD backlight
(Pressing and holding the DISP/BATT
INFO button for a few seconds) (p. 19)
Overall operations/Easy
Handycam operation/Remote
Commander
95
Troubleshooting
The (OPTION) button is not
displayed.
The OPTION MENU cannot be used
during Easy Handycam operation.
The menu settings have changed
automatically.
During Easy Handycam operation, nearly
all the menu items will be automatically
set to the default settings.
During Easy Handycam operation, some
menu items are fixed as follows.
– [REC MODE] : [SP]
– [ QUALITY] : [FINE]
– [DATA CODE] : [DATE/TIME]
Following menu items return to the default
settings when you set the POWER switch
to OFF (CHG) for more than 12 hours.
– [FOCUS]
– [SPOT FOCUS]
–[EXPOSURE]
– [SPOT METER]
– [SCENE SELECTION]
– [WHITE BAL.]
– [MICREF LEVEL]
– [DROP SENSOR]
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
During Easy Handycam operation, settings
for the following menu items are
maintained the ones before Easy
Handycam operation.
– [FILE NO.]
– [VOLUME]
– [TV TYPE]
– [ DISPLAY]
– [BEEP]
– [CLOCK SET]
– [AREA SET]
– [SUMMERTIME]
– [WIDE SELECT]*
1
– [ IMAGE SIZE]*
2
– [DEMO MODE]
– [TIMING]*
2
– [STILL MEDIA]
– [ LANGUAGE SET]
– [RECORD SOUND]*
2
– [FLASH MODE]*
3
*
1
DCR-SR32E/SR33E/SR42E
*
2
DCR-SR190E/SR200E/SR290E/SR300E
*
3
DCR-SR52E/SR62E/SR72E/SR82E
Your camcorder gets warm.
This is because the power has been turned
on for a long time. This is not a
malfunction.
The supplied Remote Commander
does not function (except for DCR-
SR32E/SR33E/SR42E).
Set [REMOTE CTRL] to [ON] (p. 64).
Insert a battery into the battery holder with
the +/– polarities correctly matching the +/
– marks (p. 122).
Remove any obstructions between the
Remote Commander and the remote
sensor.
Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander (except for DCR-SR32E/
SR33E/SR42E).
Select a commander mode other than DVD
2 for your DVD device, or cover the sensor
of your DVD device with black paper.
The power abruptly turns off.
When approximately 5 minutes have
elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 64), or turn
on the power again, or use the AC
Adaptor.
Charge the battery pack (p. 13).
Batteries/Power sources
96
The CHG (charge) lamp does not
light while the battery pack is being
charged.
Turn the POWER switch to OFF (CHG)
(p. 13).
Attach the battery pack to the camcorder
correctly (p. 13).
Connect the mains lead to the wall socket
properly.
The battery charge is completed (p. 13).
Set the camcorder onto the Handycam
Station securely (p. 13).
The CHG (charge) lamp flashes while
the battery pack is being charged.
Attach the battery pack to the camcorder
correctly (p. 13). If the problem persists,
disconnect the AC Adaptor from the wall
socket and contact your Sony dealer. The
battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
The temperature of the environment is too
high or too low. This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p. 13).
The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly
discharged.
The temperature of the environment is too
high or low. This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p. 13).
The buttons do not appear on the
touch panel.
Touch the LCD screen lightly.
Press DISP/BATT INFO on your
camcorder (or DISPLAY on the Remote
Commander (except for DCR-SR32E/
SR33E/SR42E)) (p. 19).
The buttons on the touch panel do
not work correctly or do not work at
all.
Adjust the touch panel
([CALIBRATION]) (p. 115).
Menu items are grayed out.
You cannot select grayed items in the
current recording/playback situation.
There are some functions you cannot
activate simultaneously (p. 102).
You cannot operate functions using
the “Memory Stick Duo.”
If you use a “Memory Stick Duo”
formatted on a computer, format it again
on your camcorder (p. 50).
You cannot delete images stored on
or format the “Memory Stick Duo.”
The maximum number of still images that
you can delete on the index screen at one
time is 100.
You cannot delete still images that have
write-protection set by another device.
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
camcorder (p. 111). Use the supported file
format.
LCD screen
“Memory Stick Duo”
97
Troubleshooting
Refer also to “Memory Stick Duo” (p. 96).
Pressing START/STOP or PHOTO
does not record images.
The playback screen is displayed. Set your
camcorder to recording standby (p. 24).
Your camcorder is recording the image
you have just shot on the hard disk. You
cannot make new recording during this
period (p. 24).
The hard disk of the camcorder is full.
Delete unnecessary images (p. 38).
Total number of movies or still images
exceeds the recordable capacity of your
camcorder (p. 57, 110). Delete unnecessary
images (p. 38).
While activating [DROP SENSOR] (p. 64),
you may not record images.
The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off the camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
You cannot record a still image.
The playback screen is displayed. Set your
camcorder to recording standby (p. 24).
You can capture up to 3 still images only
during movie recording (DCR-SR190E/
SR200E/SR290E/SR300E).
The “Memory Stick Duo” has run out of
space. Use a new “Memory Stick Duo” or
format the “Memory Stick Duo” (p. 50).
Or delete the unnecessary images (p. 39).
You cannot record a still image together
with:
– [SMTH SLW REC] (DCR-SR190E/
SR200E/SR290E/SR300E)
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]
The ACCESS lamp remains lit even
when you stop recording.
Your camcorder is recording the image
you have just shot on the hard disk.
The recording angle looks different.
Recording angle may vary depending on
the condition of the camcorder. This is not
a malfunction.
The flash does not work (except for
DCR-SR32E/SR33E/SR42E).
You cannot record with the flash with:
Capturing still images while recording a
movie
– The conversion lens (optional) attached
Even if auto flash or (Auto redeye
reduction) is selected, you cannot use the
flash with:
– NightShot
– [SUPER NIGHTSHOT]
– [TWILIGHT], [CANDLE],
[SUNRIZE&SUNSET],
[FIREWORKS], [LANDSCAPE],
[SPOTLIGHT], [BEACH] or [SNOW]
in [SCENE SELECTION]
– [MANUAL] in [EXPOSURE]
– [SPOT METER]
The actual recording time for movie
is less than the expected
approximate recording time of the
hard disk.
Depending on an object, such as a fast
moving object, the time available for
recording may shorten (p. 54).
Recording
98
The recording stops.
The temperature of your camcorder is
extremely high. Turn off your camcorder
and leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off the camcorder and
take it to a warm place. Leave the
camcorder there for a while, then turn on
the camcorder.
If you keep applying vibration on the
camcorder, recording may stop.
There is a time difference between
the point where you press START/
STOP and the point that the
recorded movie starts/stops.
On your camcorder, there may be a slight
time difference between the point where
you press START/STOP and the actual
point that recording movie starts/stops.
This is not a malfunction.
The auto focus does not function.
Set [FOCUS] to [AUTO] (p. 67).
The recording conditions are not suitable
for auto focus. Adjust the focus manually
(p. 67).
[STEADYSHOT] does not function.
Set [STEADYSHOT] to [ON] (p. 55).
[STEADYSHOT] may not be able to
compensate for excessive vibrations.
The BACK LIGHT function does not
function.
The BACK LIGHT function cannot be
used during Easy Handycam operation.
The subjects passing by the frame
very fast appear crooked (DCR-
SR190E/SR200E/SR290E/SR300E).
This is called the focal plane phenomenon.
This is not a malfunction. Because of the
way the image device (CMOS sensor)
reads out image signals, the subjects
passing by the frame rapidly might appear
crooked depending on the recording
conditions.
Tiny spots in white, red, blue, or
green appear on the screen.
The spots appear when you are recording
with [S. NIGHTSHOT PLS] (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E), [SUPER NIGHTSHOT]
(DCR-SR190E/SR200E/SR290E/
SR300E) or [COLOR SLOW SHTR]. This
is not a malfunction.
The color of the image is not
correctly displayed.
Set the NIGHTSHOT PLUS switch (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E) or NIGHTSHOT switch
(DCR-SR190E/SR200E/SR290E/
SR300E) to OFF (p. 27).
The screen image is bright, and the
subject does not appear on the
screen.
Set the NIGHTSHOT PLUS switch (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E) or NIGHTSHOT switch
(DCR-SR190E/SR200E/SR290E/
SR300E) to OFF (p. 27).
The screen image is dark, and the
subject does not appear on the
screen.
Press and hold DISP/BATT INFO for a
few seconds to turn on the backlight
(p. 19).
99
Troubleshooting
A vertical band appears when
recording candlelight or electric light
in the dark (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/
SR82E).
This occurs when the contrast between the
subject and the background is too high.
This is not a malfunction.
Horizontal stripes appear on the
image (DCR-SR190E/SR200E/
SR290E/SR300E).
This occurs when recording images under
a fluorescent lamp, sodium lamp, or
mercury lamp. This is not a malfunction.
A vertical white line may appear on
an image taken in bright light (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E).
This phenomenon is called the smear
effect. This is not a malfunction.
Undesirable flicker occurs (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E).
This occurs when recording images under
a fluorescent lamp, sodium lamp, or
mercury lamp. This is not a malfunction.
Black bands appear when you
record a TV screen or computer
screen (except for DCR-SR290E/
SR300E).
Set [STEADYSHOT] to [OFF] (p. 55).
[S. NIGHTSHOT PLS] cannot be
operated (DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/SR72E/
SR82E).
Set the NIGHTSHOT PLUS switch to ON.
[SUPER NIGHTSHOT] cannot be
operated (DCR-SR190E/SR200E/
SR290E/SR300E).
Set the NIGHTSHOT switch to ON.
[COLOR SLOW SHTR] does not
operate correctly.
[COLOR SLOW SHTR] may not operate
correctly in total darkness. Use NightShot
plus or [S. NIGHTSHOT PLS] (DCR-
SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E), NightShot or [SUPER
NIGHTSHOT] (DCR-SR190E/SR200E/
SR290E/SR300E).
You cannot adjust [LCD BL LEVEL].
You cannot adjust [LCD BL LEVEL]
when:
– The LCD panel is closed on your
camcorder with the LCD screen facing
out.
– The power is supplied from the AC
Adaptor.
Still images stored on a “Memory
Stick Duo” cannot be played back.
Still images cannot be played back if you
have modified files or folders, or have
edited the data on a computer. (The file
name flashes in that case.) This is not a
malfunction (p. 112).
Still images recorded by other devices may
not be played back, or appeared in the
actual size. This is not a malfunction
(p. 112).
is indicated on an image in the
VISUAL INDEX screen.
Loading of the data may have failed. It
may be indicated correctly when you turn
off the power and then turn it on again, or
repeat removing and inserting the
“Memory Stick Duo” a couple of times.
Playing back images on your
camcorder
100
This may appear on still images recorded
by other devices, edited on a computer, etc.
No sound or only a quiet sound is
heard during playback.
Turn up the volume (p. 32).
Sound is not output when the LCD panel is
closed. Open the LCD panel.
When you record sound with [MICREF
LEVEL] (p. 71) set to [LOW], the
recorded sound may be difficult to hear.
In case of [SMTH SLW REC], you cannot
record sounds during shooting (about 3
seconds) (DCR-SR190E/SR200E/
SR290E/SR300E).
Unable to edit.
There are no images recorded.
Unable to edit because of the condition of
the image.
Movies cannot be added in the
Playlist.
The hard disk is full, or the added movies
exceed 99. Erase unnecessary movies
(p. 43).
You cannot add still images in the Playlist.
A movie cannot be divided.
A movie that is too short cannot be
divided.
A movie protected on another device
cannot be divided.
Unable to copy the images from the
hard disk to a “Memory Stick Duo.”
You cannot copy a movie from the hard
disk to a “Memory Stick Duo” as a still
image during playback on your camcorder.
You cannot hear the sound.
The audio will not be output when you
connect a device via the S VIDEO plug
only. Connect the white and red plugs of
the A/V connecting cable, too (p. 35).
The aspect ratio of the playback is
not correct when connecting your
camcorder to the TV.
Set [TV TYPE] depending on your TV
(p. 62).
You cannot dub correctly using the
A/V connecting cable.
The A/V connecting cable is not connected
properly. Make sure that the A/V
connecting cable is connected to the proper
jack, i.e. to the input jack of another device
for dubbing a image from your camcorder
(p. 45).
The computer does not recognize
your camcorder.
Install Picture Motion Browser (p. 75).
Disconnect the USB device other than the
keyboard, the mouse, and the camcorder
from the computer.
Disconnect the cable from the computer
and the Handycam Station, restart the
computer, then connect them again
correctly.
Check if Media Check Tool is running on
the computer. For details on Media Check
Tool, refer to the Help for Picture Motion
Browser.
Editing images on your
camcorder
Dubbing/Connecting to other
devices
Connecting to a computer
101
Troubleshooting
Cannot use the supplied software,
Picture Motion Browser, on the
Macintosh computer.
You cannot use Picture Motion Browser
on a Macintosh.
The One Touch Disc Burn function
does not work.
Install Picture Motion Browser (p. 75).
Check if Media Check Tool is running on
the computer. For details on Media Check
Tool, refer to the Help for Picture Motion
Browser.
You cannot view the images
recorded on your camcorder with a
computer.
Make sure you insert the connector in the
correct direction, then connect the USB
cable to the (USB) jack on the
Handycam Station and the computer
firmly.
Touch (OTHERS) t [COMPUTER]
t [ COMPUTER] on the HOME
MENU of the camcorder (p. 81).
Disconnect the USB device other than the
keyboard, the mouse, and the camcorder
from the computer.
You cannot view the still images
recorded on a “Memory Stick Duo”
on the computer.
Insert the “Memory Stick Duo” firmly.
Touch (OTHERS) t [COMPUTER]
t [ COMPUTER] on the HOME
MENU of the camcorder (p. 83).
When you connect your camcorder to a
computer by selecting [ COMPUTER],
you cannot view the still images stored in a
“Memory Stick Duo.” Make sure that you
have connected the camcorder to the
computer with [ COMPUTER].
The computer does not recognize the
“Memory Stick Duo” during camcorder
operation such as playback or editing of
images on the hard disk. Finish camcorder
operation before connecting the camcorder
to the computer.
The “Memory Stick” icon
([Removable Disk]) does not appear
on the computer screen.
Insert a “Memory Stick Duo” into your
camcorder.
Disconnect the USB device other than the
keyboard, the mouse, and the camcorder
from the computer.
•Touch (OTHERS) t [COMPUTER]
t [ COMPUTER] on the HOME
MENU of the camcorder (p. 83).
The computer does not recognize the
“Memory Stick Duo” during camcorder
operation such as playback or editing of
images on the hard disk. Finish camcorder
operation before connecting the camcorder
to the computer.
Picture Motion Browser does not
function correctly.
Close Picture Motion Browser, then restart
the Windows computer.
The image or sound recorded on the
camcorder is not played on the
computer correctly.
If your camcorder is connect to a computer
that does not support Hi-speed USB (USB
2.0), the movie/still image or sound may
not be played back correctly. The movie/
still image or sound imported to your
computer is not affected.
Movie playback or sound may stop
temporarily depending on your computer.
The movie or sound imported to your
computer is not affected.
102
The playback screen is paused or
distorted.
Check the recommended computer
environment required to play movies.
The actual displayed screen or
message is different from that
shown in this Handbook.
The screen or message may be different.
The extension of a file is not
displayed on your computer.
To display the extension, follow the steps
below:
1 Click [Tool] in the window folder t
[Folder option...] t [View] tab.
2 Remove the check mark from the [Hide
file extensions for known file types]
under Advanced Settings.
3 Click [OK].
While performing Easy PC Back-up,
[Not enough space on destination
hard disk.] is displayed on the
computer screen.
Delete unnecessary files from your
computer to free hard disk space.
The following list shows examples of
unworkable combinations of functions and
menu items.
Functions that cannot be used
simultaneously
Cannot use
Because of following
settings
BACK LIGHT [FIREWORKS] in
[SCENE SELECTION],
[MANUAL] in
[EXPOSURE], [SPOT
METER]
WIDE
SELECT*
1
[OLD MOVIE]
[WIDE
SELECT]*
2
[OLD MOVIE]
[STEADY
SHOT]*
3
[SMTH SLW REC]
[AUTO SLW
SHUTTR]
[S. NIGHTSHOT
PLS]*
4
, [SUPER
NIGHTSHOT]*
5
,
[COLOR SLOW SHTR],
[D.EFFECT], [SCENE
SELECTION], [SMTH
SLW REC]*
5
[SPOT FOCUS] [SCENE SELECTION]
[TELE
MACRO]
[SCENE SELECTION]
[EXPOSURE] NightShot plus*
4
, [S.
NIGHTSHOT PLS]*
4
,
NightShot*
5
, [SUPER
NIGHTSHOT]*
5
[SPOT METER] NightShot plus*
4
, [S.
NIGHTSHOT PLS]*
4
,
NightShot*
5
, [SUPER
NIGHTSHOT]*
5
103
Troubleshooting
*
1
DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E
*
2
DCR-SR32E/SR33E/SR42E
*
3
DCR-SR190E/SR200E
*
4
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
*
5
DCR-SR190E/SR200E/SR290E/SR300E
[SCENE
SELECTION]
NightShot plus*
4
, [S.
NIGHTSHOT PLS]*
4
,
NightShot*
5
, [SUPER
NIGHTSHOT]*
5
,
[COLOR SLOW SHTR],
[OLD MOVIE], [TELE
MACRO], [FADER]
[WHITE BAL.] NightShot plus*
4
, [S.
NIGHTSHOT PLS]*
4
,
NightShot*
5
, [SUPER
NIGHTSHOT]*
5
[ONE PUSH] in
[WHITE BAL.]
[SMTH SLW REC]*
5
[COLOR
SLOW SHTR]
[FADER], [D.EFFECT],
[SCENE SELECTION]
[S. NIGHTSHOT
PLS]
*
4
[FADER], [D.EFFECT]
[SUPER
NIGHTSHOT]
*
5
[FADER], [D.EFFECT]
[FADER] [S. NIGHTSHOT
PLS]*
4
, [SUPER
NIGHTSHOT]*
5
,
[COLOR SLOW SHTR],
[D.EFFECT],
[CANDLE]/
[FIREWORKS] in
[SCENE SELECTION]
[D.EFFECT] [S. NIGHTSHOT
PLS]*
4
, [SUPER
NIGHTSHOT]*
5
,
[COLOR SLOW SHTR],
[FADER]
[OLD MOVIE] [SCENE SELECTION],
[PICT.EFFECT]
[PICT.EFFECT] [OLD MOVIE]
Cannot use
Because of following
settings
104
Warning indicators and messages
If indicators appear on the LCD screen,
check the following.
Some symptoms you can fix by yourself. If
the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
C:(or E:) ss:ss (Self-diagnosis
display)
C:04:ss
The battery pack is not an
“InfoLITHIUM” battery pack. Use an
“InfoLITHIUM” battery pack (p.112).
Connect the DC plug of the AC
Adaptor to the DC IN jack of the
Handycam Station or your camcorder
securely (p. 13).
C:13:ss / C:32:ss
Remove the power source. Reconnect it
and operate your camcorder again.
Turn on your camcorder again.
E:20:ss / E:31:ss / E:61:ss /
E:62:ss / E:91:ss / E:94:ss
A malfunction that you cannot service
has occurred. Contact your Sony dealer
or local authorized Sony service
facility. Inform them of the 5-digit
code, which starts from “E”.
101-0001 (Warning indicator
pertaining to files)
Slow flashing
The file is damaged.
The file is unreadable.
(Warning on the hard disk of the
camcorder)*
Fast flashing
An error may have occurred with the
hard disk drive in your camcorder.
(Warning on the hard disk of the
camcorder)*
Fast flashing
The hard disk of the camcorder is fully
recorded.
An error may have occurred with the
hard disk drive in your camcorder.
E (Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating
environment or battery conditions, E
may flash, even if there are
approximately 20 minutes remaining.
(High temperature warning)
Slow flashing
The temperature of your camcorder is
getting higher. Turn off your camcorder
and leave it for a while in a cool place.
Fast flashing*
The temperature of your camcorder is
extremely high. Turn off your
camcorder and leave it for a while in a
cool place.
(Low temperature warning)*
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder
warm.
Self-diagnosis display/Warning
indicators
C:04:00
105
Troubleshooting
(Warning indicator pertaining to
“Memory Stick Duo”)
No “Memory Stick Duo” is inserted
(p. 27).
(Warning indicators pertaining to
“Memory Stick Duo” formatting)*
The “Memory Stick Duo” is damaged.
The “Memory Stick Duo” is not
formatted correctly (p. 50, 111).
(Warning indicator pertaining to
incompatible “Memory Stick Duo”)*
An incompatible “Memory Stick Duo
is inserted (p. 111).
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)*
The write-protect tab on the “Memory
Stick Duo” is set to lock (p. 111).
Access to the “Memory Stick Duo” was
restricted on another device.
(Warning indicator pertaining to
the flash)
Fast flashing
There is something wrong with the
flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient,
so camera-shake easily occurs. Use the
flash.
The camcorder is unsteady, so camera-
shake easily occurs. Hold the
camcorder steady with both hands and
shoot the image. However, note that the
camera-shake warning indicator does
not disappear.
(Warning indicator pertaining to
drop sensor)
The drop sensor function (p. 64) is
activated, and has detected that the
camcorder has been dropped.
Therefore, the camcorder is taking
steps to protect the hard disk.
Recording/playback may be disabled as
a result.
The drop sensor function does not
guarantee the protection of the hard
disk under all possible situations. Use
the camcorder under stable conditions.
* You hear a melody when the warning indicators
appear on the screen (p. 61).
If messages appear on the screen, follow the
instructions.
x Hard disk
Movie folder full. Cannot record
movies.
Delete unnecessary images (p. 38) or
perform [ FORMAT] (p. 49).
HDD format error.
The hard disk of the camcorder is set
differently from the default format.
Performing [ FORMAT] (p. 49)
may enable you to use your camcorder.
This will delete all data in the hard disk.
Data error.
An error occurred during reading or
writing the hard disk of the camcorder.
This may occur when you keep
applying shock on the camcorder.
Description of warning
messages
106
Management file damaged. Create
new file?
The image management file is
damaged. When you touch [YES], a
new image management file is created.
The old recorded images on the hard
disk of the camcorder cannot be played
back. (Image files are not damaged.)
In this case, import the image files to
your computer.
Buffer overflow
You cannot record because the drop
sensor senses a drop of the camcorder
repeatedly. If you may be at risk of
dropping the camcorder constantly, set
[DROP SENSOR] to [OFF], and you
may be able to record the image again
(p. 64).
Recovering data
Your camcorder tries to recover data
automatically if the data writing was
not performed properly.
Cannot recover data.
Writing data onto the hard disk of the
camcorder has failed. Attempts were
made to recover the data, but they were
unsuccessful.
x “Memory Stick Duo”
Reinsert the Memory Stick.
Reinsert the “Memory Stick Duo” a
few times. If even then the indicator
flashes, the “Memory Stick Duo” could
be damaged. Try with another
“Memory Stick Duo.”
This Memory Stick is not formatted
correctly.
Check the format, then format the
“Memory Stick Duo” with your
camcorder if necessary (p. 50).
Memory Stick folders are full.
You cannot create folders exceeding
999MSDCF. You cannot create or
delete created folders using your
camcorder.
You will have to format the “Memory
Stick Duo” (p. 50), or delete them using
your computer.
Cannot save still picture.
When using the Dual Rec function, do
not remove the still image recording
media from the camcorder until
recording is finished and still image
recording is complete (p. 26).
x PictBridge compliant printer
Not connected to PictBridge
compatible printer.
Turn off the printer and on again, then
remove the USB cable (supplied) and
reconnect it.
Cannot print. Check the printer.
Turn off the printer and on again, then
remove the USB cable (supplied) and
reconnect it.
107
Troubleshooting
x Other
No further selection is possible.
You can select only 100 images at one
time for:
deleting images
printing still images
Data protected.
You tried to delete data protected on
another device. Release the protection
of the data on the device used to protect
the data.
Cannot divide.
You cannot divided a movie that is
extremely short.
108
Additional Information
Using your camcorder abroad
Power supply
You can use your camcorder in any
countries/regions using the AC Adaptor
supplied with your camcorder within the
AC 100 V to 240 V, 50/60 Hz range.
On TV color systems
Your camcorder is a PAL-system-based
camcorder. If you want to view the
playback image on a TV, it must be a PAL-
system-based TV with an AUDIO/VIDEO
input jack.
System Used in
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia, New
Zealand, Norway, Poland,
Portugal, Singapore, Slovak
Republic, Spain, Sweden,
Switzerland, Thailand, United
Kingdom, etc.
PAL - M Brazil
PAL - N Argentina, Paraguay, Uruguay.
NTSC
Bahama Islands, Bolivia,
Canada, Central America,
Chile, Colombia, Ecuador,
Guyana, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan,
the Philippines, the U.S.A.,
Venezuela, etc.
SECAM
Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
109
Additional Information
Setting to the local time
You can easily set the clock to the local time by setting a time difference when using your
camcorder abroad. Set (SETTINGS) t [CLOCK/ LANG] t [AREA SET] and
[SUMMERTIME] on the HOME MENU (p. 17).
World time difference
Time-zone
differences
Area setting
GMT Lisbon, London
+01:00 Berlin, Paris
+02:00 Helsinki, Cairo, Istanbul
+03:00 Moscow, Nairobi
+03:30 Tehran
+04:00 Abu Dhabi, Baku
+04:30 Kabul
+05:00 Karachi, Islamabad
+05:30 Calcutta, New Delhi
+06:00 Almaty, Dhaka
+06:30 Rangoon
+07:00 Bangkok, Jakarta
+08:00 HongKong, Singapore, Beijing
+09:00 Seoul, Tokyo
+09:30 Adelaide, Darwin
+10:00 Melbourne, Sydney
+11:00 Solomon Is.
+12:00 Fiji, Wellington
–12:00 Eniwetok, Kwajalein
–11:00 Samoa
–10:00 Hawaii
–09:00 Alaska
–08:00 LosAngeles, Tijuana
–07:00 Denver, Arizona
–06:00 Chicago, Mexico City
–05:00 NewYork, Bogota
–04:00 Santiago
–03:30 St. John’s
–03:00 Brasilia, Montevideo
–02:00 Fernando de Noronha
–01:00 Azores, Cape Verde Is.
Time-zone
differences
Area setting
110
Files on the camcorder hard disk/folder
structure
The file/folder structure is shown below. You do not usually need to acknowledge the file/
folder structure, when recording/playing back images on the camcorder. To enjoy still images
or movies by connecting to a computer, see page 73, then use the supplied application.
A Image management files
When you delete the files, you cannot
record/play back the images correctly.
The files are defaulted as hidden files and
not usually displayed.
B Movie files (MPEG2 files)
The extension of the files is “.MPG”. The
maximum size is 2 GB. When the
capacity of a file exceeds 2 GB, the file
becomes divided.
The file numbers go up automatically.
When the file numbers exceeds 9,999,
another folder is created to record new
movie files.
The folder name goes up: [101PNV01]
t [102PNV01]
C Still image files (JPEG files)
The extension of the files is “.JPG”. The
file numbers go up automatically. When
the capacity of a file number exceeds
9,999, another folder is created to store
new image files.
The folder name goes up: [101MSDCF]
t [102MSDCF]
By selecting [ COMPUTER] on [USB
SELECT], you can access the hard disk of the
camcorder from the computer through USB
connection.
Do not modify the files or folders on the
camcorder through the computer without using
the supplied computer application. The image
files may be destroyed or may not be played back.
Operation is not guaranteed, if you perform the
above operation without using the supplied
computer application.
Do not format the hard disk of the camcorder
using the computer. The camcorder may not
operate correctly.
When the file extensions are not displayed on the
computer screen, see page 102.
Do not copy the files on the hard disk of the
camcorder from the computer. Operation is not
guaranteed.
When the folder number shows 999 and file
number exceeds 9,999, recording may not be
possible. In this case, perform [ FORMAT]
(p. 49).
For DCR-SR32E/SR33E/SR52E/SR72E/
SR190E/SR290E only:
You cannot import data on the hard disk of the
camcorder from the computer.
111
Additional Information
Maintenance and precautions
A “Memory Stick” is a compact, portable
IC recording medium with a large data
capacity.
However, we do not guarantee the
operation of all types of “Memory Stick
Duo” on your camcorder. (See the list
below for more details.)
Still image format: Your camcorder compresses
and records image data in the JPEG (Joint
Photographic Experts Group) format. The file
extension is “.JPG.”
File names of still images:
101- 0001: This file name appears on the
screen of your camcorder.
DSC00001.JPG: This file name appears on
the display of a computer.
A “Memory Stick Duo” formatted by a
computer (Windows OS/Mac OS) does not have
guaranteed compatibility with your camcorder.
Data read/write speed may vary depending on
the combination of the “Memory Stick” and
“Memory Stick” compliant product you use.
On a “Memory Stick Duo” with a
write-protect tab
You can prevent accidental erasure of
images when you slide the write-protect tab
on the “Memory Stick Duo” with a small
tapered object, to the write-protect position.
Notes on use
Damaged or lost image data will not be
compensated for, and may occur in the
following cases:
If you eject the “Memory Stick Duo,” turn the
power off on your camcorder, or remove the
battery pack for replacement while your
camcorder is reading or writing image files on
the “Memory Stick Duo” (while the ACCESS
lamp is lit or flashing).
If you use the “Memory Stick Duo” near
magnets or magnetic fields.
It is recommended you make a back-up of
important data on the hard disk of a
computer.
x On handling a “Memory Stick”
Keep the following in mind when handling
a “Memory Stick Duo.”
Be careful not to apply excessive force when
writing on a memo area on a “Memory Stick
Duo.”
Do not attach a label or the like on a “Memory
Stick Duo” or a Memory Stick Duo adaptor.
When you carry or store a “Memory Stick Duo,”
put it in its case.
Do not touch, or allow metallic objects to come
into contact with the terminals.
Do not bend, drop or apply strong force to the
“Memory Stick Duo.”
Do not disassemble or modify the “Memory
Stick Duo.”
Do not let the “Memory Stick Duo” get wet.
Be careful to keep “Memory Stick Duo” media
out of the reach of small children. There is
danger that a child might swallow it.
About the “Memory Stick”
Types of “Memory Stick”
Recording/
Playback
“Memory Stick”
(without MagicGate)
“Memory Stick Duo”*
1
(without MagicGate)
a
“MagicGate Memory Stick”
“Memory Stick Duo”*
1
(with MagicGate)
a*
2
*
3
“MagicGate Memory Stick
Duo” *
1
a*
3
“Memory Stick PRO”
“Memory Stick PRO Duo” *
1
a*
2
*
3
*
1
A “Memory Stick Duo” is about half the size of
a standard “Memory Stick.”
*
2
The types of “Memory Stick” that support high
speed data transfer. The speed of data transfer
varies depending on the device to be used.
*
3
“MagicGate” is a copyright protection
technology that records and transfers the
contents in an encrypted format. Note that data
that uses “MagicGate” technology cannot be
recorded or played on your camcorder.
112
Do not insert anything other than a “Memory
Stick Duo” into the “Memory Stick Duo” slot.
Doing so may cause a malfunction.
x On a location for use
Do not use or keep the “Memory Stick
Duo” in the following locations:
Places subject to extremely high temperature,
such as a car parked outside in the summer.
Places under direct sunlight.
Places with extremely high humidity or subject
to corrosive gases.
x On the Memory Stick Duo adaptor
After inserting a “Memory Stick Duo” into
the Memory Stick Duo adaptor, you can use
it with a standard “Memory Stick”
compliant device.
When using a “Memory Stick Duo” with a
“Memory Stick” compliant device, be sure to
insert the “Memory Stick Duo” into a Memory
Stick Duo adaptor.
When inserting a “Memory Stick Duo” into a
Memory Stick Duo adaptor, make sure the
“Memory Stick Duo” is inserted facing in the
correct direction, then insert it all the way in.
Note that improper use may cause a
malfunction. Also, if you force the “Memory
Stick Duo” into the Memory Stick Duo adaptor
in the wrong direction, it may be damaged.
Do not insert a Memory Stick Duo adaptor
without a “Memory Stick Duo” attached. Doing
so may result in malfunctions of the unit.
x On a “Memory Stick PRO Duo”
The maximum memory capacity of a
“Memory Stick PRO Duo” that can be used
on your camcorder is 4 GB.
On image data compatibility
Image data files recorded on a “Memory Stick
Duo” by your camcorder conform to the
“Design rule for Camera File system” universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
If you cannot use a “Memory Stick Duo” that
has been used with another device, format it
with your camcorder (p. 50). Note that
formatting erases all information on the
“Memory Stick Duo.”
You may not be able to play back images with
your camcorder:
When playing back image data modified on
your computer.
When playing back image data recorded with
other devices.
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
“InfoLITHIUM” H series battery packs
have the mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an optional AC Adaptor/
charger.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
With an AC Adaptor/charger, the remaining
battery time and charging time appear.
To charge the battery pack
Be sure to charge the battery pack before you
start using your camcorder.
We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the CHG (charge) lamp
turns off. If you charge the battery pack outside
of this temperature range, you may not be able
to charge it efficiently.
After charging is complete, disconnect the cable
from the DC IN jack on the Handycam Station
or your camcorder, then remove the battery
pack.
About the “InfoLITHIUM”
battery pack
113
Additional Information
To use the battery pack effectively
Battery pack performance decreases when the
surrounding temperature is 10 °C (50 °F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for a
longer time.
Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
Use a large capacity battery pack: NP-FH70/
FH100 (optional).
Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
We recommend using a large capacity battery
pack: NP-FH70/FH100.
Be sure to set the POWER switch to OFF
(CHG) when not recording or playing back on
your camcorder. The battery pack is also
consumed when your camcorder is in recording
standby or playback pause.
Have spare battery packs ready for two or three
times the expected recording time, and make
trial recordings before making the actual
recording.
Do not expose the battery pack to water. The
battery pack is not water resistant.
About the remaining battery time
indicator
When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
The E mark that indicates low battery flashes
even if there are still 5 to 10 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
To discharge the battery pack on your
camcorder completely, touch (SETTINGS)
t [GENERAL SET] t [A.SHUT OFF] t
[NEVER] on the HOME MENU and leave your
camcorder in recording standby until the power
goes off (p. 64).
About battery life
Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
Each battery’s life is governed by storage,
operating and environmental conditions.
114
On use and care
Do not use or store the camcorder and
accessories in the following locations:
Anywhere extremely hot, cold or humid.
Never leave them exposed to temperatures
above 60 °C (140 °F), such as under direct
sunlight, near heaters or in a car parked in the
sun. They may malfunction or become
deformed.
Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The
camcorder may not be able to record properly.
Near AM receivers and video equipment.
Noise may occur.
On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
Near windows or outdoors, where the LCD
screen or the lens may be exposed to direct
sunlight. This damages the inside of the LCD
screen.
Operate your camcorder on DC 6.8 V/7.2 V
(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories
recommended in these operating instructions.
Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
Keep the POWER switch setting to OFF (CHG)
when you are not using your camcorder.
Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
When disconnecting the mains lead, pull it by
the plug and not the cord.
Do not damage the mains lead such as by
placing anything heavy on it.
Keep metal contacts clean.
Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult a doctor
immediately (DCR-SR52E/SR62E/SR72E/
SR82E/SR190E/SR200E/SR290E/SR300E).
If the battery electrolytic liquid has leaked:
consult your local authorized Sony service
facility.
wash off any liquid that may have contacted
your skin.
if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
x When not using your camcorder for a
long time
Periodically turn it on and let it run such as by
playing back or recording images for about 3
minutes.
Use up the battery pack completely before
storing it.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder. This may
cause a malfunction to your camcorder.
x If moisture condensation has occurred
Leave your camcorder for about 1 hour
without turning it on.
x Note on moisture condensation
Moisture may condense when you bring
your camcorder from a cold place into a
warm place (or vice versa) or when you use
your camcorder in a humid place as
follows:
You bring your camcorder from a ski slope into
a place warmed up by a heating device.
You bring your camcorder from an air
conditioned car or room into a hot place outside.
You use your camcorder after a squall or a
shower.
You use your camcorder in a hot and humid
place.
About handling of your
camcorder
115
Additional Information
x How to prevent moisture condensation
When you bring your camcorder from a
cold place into a warm place, put your
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the surrounding temperature (after
about 1 hour).
LCD screen
Do not exert excessive pressure on the LCD
screen, as it may cause damage.
If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
x To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
x On adjustment of the touch panel
(CALIBRATION)
The buttons on the touch panel may not
work correctly. If this happens, follow the
procedure below. It is recommended that
you connect your camcorder to the wall
socket using the supplied AC Adaptor
during the operation.
1 Turn on your camcorder, then press
(HOME).
2 Touch (SETTINGS) t [GENERAL
SET] t [CALIBRATION].
3 Touch “×” displayed on the screen with the
corner of the “Memory Stick Duo” or the
like. The position of “×” changes.
Touch [CANCEL] to cancel.
If you did not press the right spot, try the
calibration again.
b Notes
Do not use a sharp-pointed object for
calibration. Doing so may damage the LCD
screen.
You cannot calibrate the LCD screen if it is
rotated, or closed with the screen facing out.
On handling the casing
If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the
finish:
Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
Handling the camcorder with above
substances on your hands.
Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
About care and storage of the lens
Wipe the surface of the lens clean with a soft
cloth in the following instances:
When there are fingerprints on the lens
surface.
In hot or humid locations
When the lens is exposed to salty air such as
at the seaside.
Store in a well-ventilated location subject to
little dirt or dust.
To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
116
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF (CHG). The pre-
installed rechargeable battery is always
charged while your camcorder is connected
to the wall socket via the AC Adaptor or
while the battery pack is attached. The
rechargeable battery will be fully
discharged in about 3 months if you do
not use your camcorder at all. Use your
camcorder after charging the pre-installed
rechargeable battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
Connect your camcorder to a wall socket
using the supplied AC Adaptor, and leave it
with the POWER switch set to OFF (CHG)
for more than 24 hours.
On trademarks
“Handycam” and
are registered trademarks of Sony Corporation.
“Memory Stick,” “ ,” “Memory Stick
Duo,” “ ,” “Memory Stick
PRO Duo,” “ ,”
“MagicGate,” “ ,”
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks of Sony
Corporation.
“InfoLITHIUM” is a trademark of Sony
Corporation.
DVD-R, DVD+R DL, DVD-RW, and
DVD+RW logo are trademarks.
Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
Dolby Digital 5.1 Creator is a trademark of
Dolby Laboratories.
Microsoft, Windows, and Windows Media are
trademarks or registered trademarks of U.S.
Microsoft Corporation in the U.S. and other
countries.
Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
Intel, Intel Core, and Pentium are trademarks or
registered trademarks of Intel Corporation or its
subsidiaries in the United States and other
countries.
Adobe, the Adobe logo, and Adobe Acrobat are
either registered trademarks or trademarks of
Adobe Systems Incorporated in the United
States and/or other countries.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®”
are not mentioned in each case in this Handbook.
117
Additional Information
Notes on the License
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
“C Library,” “Expat,” “zlib,” and “libjpeg”
software are provided in your camcorder. We
provide this software based on license agreements
with their owners of copyright. Based on requests
by the owners of copyright of these software
applications, we have an obligation to inform you
of the following. Please read the following
sections.
Read “license1.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“C Library,” “Expat,” “zlib,” and “libjpeg”
software.
On GNU GPL/LGPL applied software
The software that is eligible for the following
GNU General Public License (hereinafter referred
to as “GPL”) or GNU Lesser General Public
License (hereinafter referred to as “LGPL”) are
included in the camcorder.
This informs you that you have a right to have
access to, modify, and redistribute source code for
these software programs under the conditions of
the supplied GPL/LGPL.
Source code is provided on the web. Use the
following URL to download it. When
downloading the source code, select HDR-UX1/
HDR-SR1 as the model for your camcorder.
http://www.sony.net/Products/Linux/
We would prefer you do not contact us about the
contents of source code.
Read “license2.pdf” in the “License” folder on the
CD-ROM. You will find licenses (in English) of
“GPL,” and “LGPL” software.
To view the PDF, Adobe Reader is needed. If it is
not installed on your computer, you can download
it from the Adobe Systems web page:
http://www.adobe.com/
118
Quick Reference
Identifying parts and controls
The numbers in ( ) are reference pages.
A Power zoom lever (25, 33)
B PHOTO button (20, 24)
C POWER switch (17)
D CHG (charge) lamp (13)
E CHG (charge)/ (flash) lamp (13, 26)
F (flash) button (26)
G Battery pack (13)
H DC IN jack (13)
I (Movie)/ (Still) mode lamps
(23)
J ACCESS lamp (Hard disk) (23)
K START/STOP button (20, 24)
L Grip belt (19)
M Hooks for a shoulder belt
Attach a shoulder belt (optional).
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E:
DCR-SR190E/SR200E/SR290E/SR300E:
119
Quick Reference
A WIDE SELECT button (except for
DCR-SR32E/SR33E/SR42E) (28)
B BACK LIGHT button* (28)
C LCD screen/touch panel (19)
D (HOME) button (10, 52)
E Zoom buttons (25, 33)
F START/STOP button (20, 24)
G NIGHTSHOT switch (27)
H Speaker
For how to adjust the volume, see page 32.
I DISP/BATT INFO button (14, 19)
J EASY button (20)
K (VIEW IMAGES) button (21, 31)
L Memory Stick Duo slot (27)
M ACCESS lamp (“Memory Stick Duo”)
(27)
N RESET button
Initializes all the settings, including the
setting of the date and time.
* For DCR-SR32E/SR33E/SR42E, the position
of the buttons differ from the illustration
above.
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E:
DCR-SR190E/SR200E/SR290E/SR300E:
120
A NIGHTSHOT PLUS switch (27)
B A/V OUT jack (35, 45)
C REMOTE jack (except for DCR-
SR32E/SR33E/SR42E)
Connect other optional accessories.
D Lens cover switch (19)
E Flash (26)
F Remote sensor (except for DCR-
SR32E/SR33E/SR42E) /Infrared port
Point the Remote Commander (p. 122)
towards the remote sensor to operate your
camcorder.
G Active Interface Shoe (except
for DCR-SR32E/SR33E/SR42E)
The Active Interface Shoe supplies
power to optional accessories such as a
video light, a flash, or a microphone.
The accessory can be turned on or off as
you operate the POWER switch on your
camcorder. Refer to the operating
instructions supplied with your
accessory for details.
The Active Interface Shoe has a safety
device for fixing the installed accessory
securely. To connect an accessory, press
down and push it to the end, and then
tighten the screw. To remove an
accessory, loosen the screw, and then
press down and pull out the accessory.
When you are recording movies with an
external flash (optional) connected to the
accessory shoe, turn off the power of the
external flash to prevent charging noise
being recorded.
You cannot use an external flash (optional)
and the built-in flash at the same time.
When an external microphone (optional) is
connected, it takes precedence over the
built-in microphone (p. 25).
H Lens (Carl Zeiss Lens) (3)
I Built-in microphone (25)
An Active Interface Shoe compatible
microphone (optional) will take
precedence when connected.
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E:
DCR-SR190E/SR200E/SR290E/SR300E:
121
Quick Reference
A Tripod receptacle
Attach the tripod (optional: the length of
the screw must be less than 5.5 mm
(7/32 in.)) to the tripod receptacle using
a tripod screw.
B BATT (battery) release lever (14)
Handycam Station:
A DISC BURN button (78)
B Interface connector
C (USB) jack (46, 78)
DCR-SR32E/SR33E/SR52E/SR72E/
SR190E/SR290E: output only
D DC IN jack (13)
E A/V OUT jack (35, 45)
122
Remote Commander
(DCR-SR52E/SR62E/SR72E/SR82E/
SR190E/SR200E/SR290E/SR300E)
A DATA CODE button (60)
Displays the date and time or camera setting
data of the recorded images when you press this
during playback.
B PHOTO button (20, 24)
The on-screen image when you press this
button will be recorded as a still image.
C SCAN/SLOW buttons (21, 32)
D . > (Previous/Next) buttons (22,
32)
E PLAY button (21, 32)
F STOP button (21, 32)
G DISPLAY button (14)
H Transmitter
I START/STOP button (20, 24)
J Power zoom buttons (25, 33)
K PAUSE buttons (21, 32)
L VISUAL INDEX button (21, 31)
Displays the VISUAL INDEX screen when you
press this during playback.
M b / B / v / V / ENTER buttons
When you press any button on the VISUAL
INDEX screen or Playlist, the orange frame
appears on the LCD screen. Select a desired
button or an item with b / B / v / V, then press
ENTER to enter.
b Notes
Remove the insulation sheet before using the
Remote Commander.
Point the Remote Commander towards the remote
sensor to operate your camcorder (p. 120).
When no commands have been sent from the
Remote Commander in a certain period, the
orange frame disappears. When you press any of
b / B / v / V, or ENTER again, the frame appears
at the position where it was displayed last.
You cannot select some buttons on the LCD
screen using b / B / v / V.
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the Remote
Commander until it clicks.
When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
Insulation sheet
Tab
123
Quick Reference
Indicators displayed during recording/playback
A Recording mode (HQ/SP/LP) (54)
B HOME button (10, 52)
C Remaining battery (approx.) (14)
D Recording status ([STBY] (standby) or
[REC] (recording))
E Counter (hour/minute/second)
F OPTION button (65)
G Dual Rec (DCR-SR190E/SR200E/
SR290E/SR300E) (26)
H VIEW IMAGES button (21, 31)
I 5.1ch surround recording
(DCR-SR190E/SR200E/SR290E/
SR300E) (25)
J Quality ([FINE] / [STD]) (58)
K Image size (57)
L Appears while a still image is being
saved.
M Recording folder
Displays only during the recording
media of still images is a “Memory
Stick Duo.”
z Tips
When using the Dual Rec function, the movie
and still image shooting screens are both shown
together. The display position differs slightly
from that during normal operation (DCR-
SR190E/SR200E/SR290E/SR300E).
As the number of still images recorded on a
“Memory Stick Duo” increases, new folders are
automatically created to store them.
Recording movies Recording still images
124
1 Recording mode (HQ/SP/LP) (54)
3 Remaining battery (approx.) (14)
5 Counter (hour/minute/second)
6 OPTION button (65)
qf Return button
qg Playback mode
qh Current movie number/Number of total
movies
qj Previous/Next button (32)
qk Video operation buttons (21, 32)
ql Data file name
qa Image size (57)
w; Current still image number /Number of
recorded still images
wa Slide show button (34)
ws Previous/Next button (22, 32)
wd Data file name
wf VISUAL INDEX button (21, 31)
Viewing movies Viewing still images
125
Quick Reference
Following indicators appear during
recording/playback to indicate the settings
of your camcorder.
Upper left
Upper right
Center
Bottom
*
1
DCR-SR190E/SR200E/SR290E/SR300E
*
2
DCR-SR32E/SR33E/SR42E
*
3
DCR-SR52E/SR62E/SR72E/SR82E/SR190E/
SR200E/SR290E/SR300E
*
4
DCR-SR32E/SR33E/SR42E/SR52E/SR62E/
SR72E/SR82E
Indicators when you made
changes
Indicator Meaning
5.1ch surround recording/
playback*
1
(25)
Self-timer recording (71)
Flash (26, 59, 72)
MICREF LEVEL low
(71)
WIDE SELECT*
2
(54)
WIDE SELECT*
3
(28)
Indicator Meaning
Fader (71)
LCD backlight off (19)
Drop sensor off (64)
Drop sensor activated
(64)
Upper left Upper right
Bottom
Center
Indicator Meaning
Slide show set (34)
NightShot plus*
4
/
NightShot*
1
(27)
Super NightShot plus*
4
(70)
Super NightShot*
1
(70)
Color Slow Shutter (70)
PictBridge connecting
(46)
E
Warning (104)
Indicator Meaning
Picture effect (71)
Digital effect (71)
9 Manual focus (67)
SCENE SELECTION
(68)
.
Backlight (28)
n White balance (69)
SteadyShot off (55)
EXPOSURE (68)/
SPOT METER (68)
Tele macro (67)
Zebra*
1
(56)
126
The recording date and time is recorded
automatically on the hard disk and
“Memory Stick Duo.” They are not
displayed while recording. However, you
can check them as [DATA CODE] during
playback (p. 60).
Data code during recording
127
Quick Reference
Glossary
x 5.1ch surround sound
A system that plays back sound on 6 speakers, 3 at
the front (left, right and center) and 2 at the rear
(right and left) with an additional low-pass
subwoofer counted as a 0.1 channel for
frequencies of 120 Hz or lower.
x Dolby Digital
An audio encoding (compression) system
developed by Dolby Laboratories Inc.
x Dolby Digital 5.1 Creator
Sound compression technology developed by
Dolby Laboratories Inc. which compresses audio
efficiently while preserving high sound quality. It
enables recording of 5.1ch surround sound while
using hard disk space more efficiently. DVDs
created by Dolby Digital 5.1 Creator can be
played back on a compatible DVD device. You
can enjoy more realistic sound by playing the
movie on the device that supports 5.1ch surround
sound.
x Fragmentation
The condition of a hard disk in which files are
divided into pieces scattered around the hard disk.
You may not save your images correctly. You can
solve the condition by performing
[ FORMAT] (p. 49).
x JPEG
JPEG stands for Joint Photographic Experts
Group, a still image data compression (data
capacity reduction) standard. Your camcorder
records still images in JPEG format.
x MPEG
MPEG stands for Moving Picture Experts Group,
the group of standards for the coding (image
compression) of video (movie) and audio. There
are MPEG1 and MPEG2 formats. Your
camcorder records movies with SD (standard
definition) image quality in MPEG2 format.
x Thumbnail
Reduced-size images which enable you to view
many images at the same time. “VISUAL
INDEX” use a thumbnail display system.
x VBR
VBR stands for Variable Bit Rate, the recording
format for automatically controlling the bit rate
(the volume of recording data in a given time
segment) according to the scene being recorded.
For fast-moving video, a lot of hard disk space is
used to produce a clear image, so the recording
time to the hard disk shortens.
x VISUAL INDEX
This function displays images of movies and still
images you have recorded so that you can select
those scenes you want to play back.
Quick Reference
128
Index
Numeric
12IMAGES...........................61
16:9.................................36, 62
16:9 WIDE ...........................55
21-pin adaptor.......................36
4:3.............................36, 54, 62
5.1ch surround recording......25
6IMAGES.............................61
A
AC Adaptor ..........................13
ADD .....................................42
ADD by date.........................43
AREA SET...........................63
AUTO SLW SHUTTR (Auto
Slow Shutter)........................55
A.SHUT OFF (Auto shut off)
..............................................64
A/V connecting cable .....35, 45
B
BACK LIGHT......................28
Backup....................... See Save
Battery ............................13, 14
Battery Info...........................14
BEACH ................................69
BEEP ....................................61
BLACK FADER ..................71
Button-type lithium battery
............................................122
B&W ....................................71
C
CALIBRATION.................115
CAMERA DATA.................60
CANDLE..............................68
CD-ROM..............................73
Charging time .......................15
CLOCK SET ........................17
CLOCK/LANG ....................63
COLOR SLOW SHTR (Color
Slow Shutter) ....................... 70
Compression format........... 111
COMPUTER........................ 73
Hard disk
.............. 80, 82, 83, 85, 91
“Memory Stick Duo”.... 84
Connection
Computer ...................... 73
Printer ........................... 46
TV................................. 35
VCR or DVD/HDD
recorders ....................... 45
COPIES................................ 47
COPY............................. 41, 92
COPY by date ...................... 42
Copyright ....................... 3, 116
D
DATA CODE .............. 60, 126
Date Index............................ 33
DATE/TIME.... 18, 47, 60, 126
DC plug................................ 13
DELETE
by date .......................... 39
Hard disk ................ 38, 85
“Memory Stick Duo”.... 39
DELETE ALL...................... 39
DEMO MODE..................... 64
DIGITAL ZOOM ................ 55
DISC BURN .................. 78, 80
DISP OUTPUT.................... 63
DISPLAY............................. 61
Display indicators .............. 123
DIVIDE................................ 40
Dolby Digital 5.1 Creator .... 25
DROP SENSOR .................. 64
Dual Rec .............................. 26
Dubbing ............................... 45
DVD............................... 77, 90
D.EFFECT (Digital effect)
............................................. 71
E
Easy Handycam....................20
Easy PC Back-up..................81
EDIT...............................40, 41
Editing .................................. 38
On the camcorder....40, 41
On the computer............88
EMPTY ................................51
ERASE .................................43
ERASE ALL ........................43
EXPOSURE .........................68
Extension............................110
F
FADER.................................71
FILE NO. (File number).......58
FINE.....................................58
FIREWORKS.......................69
Flash .....................................26
FLASH LEVEL....................59
FLASH MODE ....................72
FOCUS.................................67
FORMAT
Hard disk.......................49
“Memory Stick Duo” .... 50
Fragmentation.....................127
G
GENERAL SET ...................64
GUIDEFRAME....................56
H
Handycam Station ........13, 121
HDD Handycam Utility
......................80, 81, 82, 85, 91
HOME MENU .................9, 52
CLOCK/LANG.............63
GENERAL SET............64
MOVIE SETTINGS...... 54
OUTPUT SETTINGS... 62
PHOTO SETTINGS .....57
Quick Reference
129
Quick Reference
SOUND/DISP SET .......61
VIEW IMAGES SET ....60
HQ ........................................54
I
Icon .......See Display indicators
Image management files .....110
Image quality ........................58
IMAGE SIZE........................57
INDOOR...............................69
INFO.....................................50
“InfoLITHIUM” battery pack
............................................112
Install ....................................75
Insulation sheet ...................122
J
JPEG ...................110, 111, 127
L
LANDSCAPE.......................69
LANGUAGE SET..........18, 63
LCD backlight ......................19
LCD BL LEVEL (LCD back
light level).......................62, 99
LCD BRIGHT ......................61
LCD COLOR........................62
LCD PANEL ........................63
LCD panel.............................19
Lens cover.............................19
LP..........................................54
M
MANAGE HDD/MEMORY
category.................................49
Media File Import.................82
“Memory Stick”..................111
“Memory Stick Duo”....27, 111
Number of recordable
images............................57
Memory Stick Duo adaptor
............................................112
MICREF LEVEL ................. 71
Mirror mode ......................... 28
Moisture condensation ....... 114
MOVE.................................. 44
Movie .............................20, 24
MOVIE SETTINGS.............54
MPEG................................. 127
MPEG2...............................110
N
NightShot .............................27
NIGHTSHOT LIGHT..........54
NightShot plus......................27
NTSC ................................. 108
Number of recordable images
.............................................. 57
O
OLD MOVIE .......................71
ONE PUSH ..........................69
One Touch Disc Burn .......... 77
OPTION MENU .................. 65
Original ................................ 42
OTHERS category ............... 38
OUTDOOR .......................... 69
OUTPUT SETTINGS .......... 62
P
PAL ....................................108
PASTEL ...............................71
PB zoom...............................33
PHOTO SETTINGS ............57
PictBridge.............................46
Picture Motion Browser
............................ 73, 86, 88, 90
PICT.EFFECT (Picture effect)
.............................................. 71
Playback ......................... 21, 31
Playback time....................... 16
Playlist..................................42
Creating......................... 42
ERASE ..........................43
ERASE ALL .................43
MOVE...........................44
Playback ........................43
PLAYLIST EDIT .................42
PORTRAIT...........................69
Pre-installed rechargeable
battery .................................116
Print ......................................46
Printer ...................................46
Q
QUALITY ............................58
R
REC MODE..........................54
RECORD SOUND ...............30
Recording .......................20, 23
Recording time .....................15
REDEYE REDUC................59
Remaining
Battery ...........................14
Hard disk.......................50
REMAINING (movie)..........56
Remote Commander ...........122
REMOTE CTRL (Remote
control) .................................64
RESET..........................58, 119
RESET buttun.....................119
S
S VIDEO cable...............35, 45
Save ......................................37
SCENE SELECTION...........68
Self-diagnosis display.........104
SELF-TIMER .......................71
SEPIA...................................71
SERIES.................................58
SETTINGS category ............52
SIZE......................................47
Slide show ............................34
130
SLIDE SHOW SET..............34
SMTH SLW REC.................29
SNOW ..................................69
Software................................75
SOUND/DISP SET ..............61
SP..........................................54
SPORTS ...............................69
SPOT FOCUS ......................67
SPOT METER (Flexible spot
meter)....................................68
SPOTLIGHT ........................69
STANDARD ........................58
STEADYSHOT....................55
Still images .....................20, 24
STILL MEDIA.....................27
SUMMERTIME...................63
SUNRISE&SUNSET ...........68
SUPER NIGHTSHOT..........70
Supplied items ......................12
System requirements ............74
S. NIGHTSHOT PLS (Super
NightShot plus).....................70
T
TELE MACRO.....................67
Thumbnail ..........................127
TIMING................................30
Trademark ..........................116
Tripod.................................121
TV.........................................35
TV color system .................108
TV TYPE........................36, 62
TWILIGHT ..........................68
TWILIGHT PORT. ..............68
U
USB cable.................46, 78, 81
USB SELECT.....46, 80, 81, 91
Using abroad.......................108
V
VBR ................................... 127
VCR or DVD/HDD recorders
............................................. 45
Video Disc Copier ............... 92
VIEW IMAGES SET........... 60
Viewing images on a TV ..... 35
VISUAL INDEX ... 21, 31, 127
VOLUME ...................... 32, 61
Volume adjustment.............. 32
V-OUT/PANEL................... 63
W
Warning indicators............. 104
Warning messages ............. 105
WHITE BAL. (White balance)
............................................. 69
WHITE FADER .................. 71
WIDE SELECT ................... 54
Windows ........................ 73, 74
World time difference........ 109
Write-protect tab ................ 111
Z
ZEBRA ................................ 56
Zoom.................................... 25
ZOOM LINK ....................... 61
Additional information on this product and
answers to frequently asked questions can be
found at our Customer Support Website.
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony DCR-SR52E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony DCR-SR52E

Sony DCR-SR52E Bedienungsanleitung - Holländisch, Französisch - 80 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info