Bedienungsanleitung Sony DCR-SX30E (Seite 96 von 101) (Englisch)

106515

Zoom out

Zoom in

Vorherige Seite

1/101

Nächste Seite

Table of Contents Useful Recording Techniques Index

Do not damage the power cord (mains lead)

such as by placing anything heavy on it.

Do not use a deformed or damaged battery

pack.

Keep metal contacts clean.

If the battery electrolytic liquid has leaked:

Consult your local authorized Sony service

facility.

Wash off any liquid that may have contacted

your skin.

If any liquid gets in your eyes, wash with

plenty of water and consult a doctor.

When not using your camcorder for a

long time

To keep your camcorder in optimum state for a

long time, turn it on and let it run by recording

and playing back images about once a month.

Use up the battery pack completely before

storing it.

Moisture condensation

If your camcorder is brought directly from a cold

place to a warm place, moisture may condense

inside your camcorder. This may cause a

malfunction to your camcorder.

If moisture condensation has occurred

Leave your camcorder for about 1 hour without

turning it on.

Note on moisture condensation

Moisture may condense when you bring your

camcorder from a cold place into a warm place

(or vice versa) or when you use your camcorder

in a humid place as follows:

You bring your camcorder from a ski slope

into a place warmed up by a heating device.

You bring your camcorder from an air

conditioned car or room into a hot place

outside.

You use your camcorder after a squall or a

shower.

You use your camcorder in a hot and humid

place.

How to prevent moisture condensation

When you bring your camcorder from a cold

place into a warm place, put your camcorder in

a plastic bag and seal it tightly. Remove the bag

when the air temperature inside the plastic bag

has reached the surrounding temperature (after

about 1 hour).











LCD screen

Do not exert excessive pressure on the LCD

screen, as it may cause uneven color and other

damage.

If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.

This is not a malfunction.

While using your camcorder, the back of

the LCD screen may heat up. This is not a

malfunction.

To clean the LCD screen

If fingerprints or dust make the LCD screen

dirty, it is recommended that you use a soft

cloth to clean it.

When you use the LCD Cleaning Kit (sold

separately), do not apply the cleaning liquid

directly to the LCD screen. Use cleaning paper

moistened with the liquid.

On adjustment of the touch panel

(CALIBRATION)

The buttons on the touch panel may not work

correctly. If this happens, follow the procedure

below. It is recommended that you connect your

camcorder to the wall outlet (wall socket) using

the supplied AC Adaptor during the operation.



Touch (HOME)  (SETTINGS) 

[GENERAL SET]  [CALIBRATION].



Touch “” displayed on the screen with the

corner of “Memory Stick PRO Duo” media or

the like 3 times.

ouch [CANCEL] to cancel calibration.

Notes

If you did not press the right spot, try the

calibration again.

Do not use a sharp-pointed object for

calibration. Doing so may damage the LCD

screen.

You cannot calibrate the LCD screen if it is

rotated, or closed with the screen facing out.







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DCR-SX30E Seite 96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DCR-SX30E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info