Bedienungsanleitung Sony DSX-S200X (Seite 24 von 172) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

452426

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Sound Settings and Setup Menu

Changing the sound settings

Adjusting the sound

characteristics

1 During reception/playback, press the

multi way encoder.

2 Rotate the multi way encoder until the

desired menu item appears, then

press it.

3 Use the multi way encoder to select

the setting, then press it.

4 Press (BACK).

The setting is complete and the display

returns to normal reception/play mode.

The following items can be set:

The operation of the multi way encoder will

differ depending on the items.

: Push the multi way encoder up/down

: Push the multi way encoder left/right

: Rotate the multi way encoder

Enjoying sophisticated sound

functions — Advanced Sound

Engine

Advanced Sound Engine, Sony’s new sound

engine, creates an ideal in-car sound field with

digital signal processing. Advanced Sound

Engine contains the following features: EQ7,

Listening Position, DM+ Advanced, Rear Bass

Enhancer, Dynamic Loudness.

Selecting the sound quality — EQ7

Preset

You can select an equalizer curve from 7

equalizer curves (“Xplod,” “Vocal,” “Edge,”

“Cruise,” “Space,” “Gravity,” “Custom” or

“off”).

1 During reception/playback, press the

multi way encoder.

2 Rotate the multi way encoder until

“EQ7 Preset” appears, then press it.

3 Push the multi way encoder up/down

until desired equalizer curve appears,

then press it.

4 Press (BACK).

The display returns to normal reception/play

mode.

To cancel the equalizer curve, select “off” on step

Tip

Adjusted equalizer curve settings can be memorized

separately for Tuner and USB (SensMe™) sources.

Customizing the equalizer curve

— EQ7 Parametric Tune

“Custom” of EQ7 allows you to make your own

equalizer settings.

Select “Custom” of EQ7 Preset.

If you set “off” for EQ7 Preset, “EQ7 Parametric

Tune” does not appear in the sound settings

menu.

1 Select a source, then press the multi

way encoder.

2 Rotate the multi way encoder until

“EQ7 Parametric Tune” appears, then

press it.

3 Setting the equalizer curve.

EQ7 Preset (page 24)

EQ7 Parametric Tune (page 24)

Listening Position Front/Rear (page 25)

Listening Position Subwoofer (page 25)

Listening Position Custom Tune (page 26)

Fader & Balance

Front/Rear/Center ()

Adjusts the relative level.

Right/Left/Center ()

Adjusts the sound balance.

Subwoofer Tune & LPF

Phase ()

Selects the phase: “Normal,” “Reverse.”

FREQ ()

Selects the subwoofer cut-off frequency:

“50Hz,” “60Hz,” “80Hz,” “100Hz,” “120Hz.”

Slope ()

Selects the LPF slope: ”1,” ”2,” ”3.”

Subwoofer Level ()

Adjusts the subwoofer volume: “+10 dB” –

“0 dB” – “–10 dB.”

(“– ∞” is displayed at the lowest setting.)

HPF

FREQ ()

Selects the cut-off frequency: “off,” “50Hz,”

“60Hz,” “80Hz,” “100Hz,” “120Hz.”

Slope ()

Select the HPF slope: ”1,” ”2,” ”3.”

DM+ Advanced (page 26)

Rear Bass Enhancer (page 26)

Dynamic Loudness (page 26)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DSX-S200X Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info