Bedienungsanleitung Sony dvp f 11 (Seite 15 von 68) (Englisch)

138108

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Getting Started

5.1 Channel Surround Hookups

With DVDs which contain DTS, Dolby* Digital or MPEG

AUDIO sound, you can enjoy the sorround sound while

producing the effect of being in a movie theater or a

concert hall, using a digital component with a built-in

DTS, Dolby Digital or MPEG decoder (not supplied). The

player outputs the surround sound signals from the

OPTICAL and COAXIAL connectors.

Using a receiver (amplifier) having the OPTICAL or

COAXIAL connector and the 5 (+1) speakers, you can

enjoy more real audio presence in the comfort of your

own home.

Required cords

Audio cords (not supplied)

One for the LINE OUT AUDIO jacks

Optical or coaxial digital cord (not supplied)

One for the OPTICAL or COAXIAL jack

S video cord (supplied)

One for the S-VIDEO jack

Connect the component via the OPTICAL or COAXIAL

connector using an optical or coaxial digital connecting cord (not

supplied). You do not need to connect both of these cords. See the

figure on the next page.

Notes

• Do not connect the power cord to an AC outlet or press the

POWER switch before completing all connections.

• Refer to the instructions supplied with the component to be

connected.

• The cord connectors should be fully inserted into the jacks.

Loose connection may cause hum and noise.

• Jacks and plugs of the connecting cords are color-coded as

follows:

Red jacks and plugs: Right audio channel

White jacks and plugs: Left audio channel

Setups for the player

Some setups are necessary for the player depending on

the components to be connected.

Use the setup display to change the various settings.

For details on using the setup display, see page 42.

• When you play a DVD that is recorded in DTS format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “DTS” to “ON” in the setup display (page 51).

• When you play a DVD that is recorded in Dolby

Digital format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in

the setup display (page 51).

• When you play a DVD that is recorded in MPEG

format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and

then set “MPEG” to “MPEG” in the setup display (page

51).

Notes

• Refer to the instructions supplied with the component to be

connected.

• When you do not connect an audio component with a

built-in DTS decoder, do not set “DTS” to “ON.”

• When you do not connect an audio component with a

built-in DOLBY DIGITAL decoder, do not set “DOLBY

DIGITAL” to “DOLBY DIGITAL.”

• When you do not connect an audio component with a

built-in MPEG decoder, do not set “MPEG” to “MPEG.”

White (L)

Red (R)

White (L)

* Manufactured under license from Dolby Laboratories.

“Dolby,” “AC-3,” “Pro Logic” and the double-D symbol a are

trademarks of Dolby Laboratories.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dvp f 11 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dvp f 11

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info