Bedienungsanleitung Sony dvp f250 (Seite 67 von 80) (Englisch)

136617

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Settings and Adjustments

◆ DOWNMIX (DVD VIDEO/DVD-RW only)

Switches the method for mixing down to 2

channels when you play a DVD which has

rear sound elements (channels) or is recorded

in Dolby Digital format. For details on the

rear signal components, see “Displaying the

audio information of the disc” (page 50). This

function affects the output of the following

jacks:

– LINE OUT L/R (AUDIO) jacks

– DIGITAL OUT (OPTICAL or COAXIAL)

jack when “DOLBY DIGITAL” is set to

“D-PCM” (page 67).

◆ DIGITAL OUT

Selects if audio signals are output via the

DIGITAL OUT (OPTICAL or COAXIAL)

jack.

Setting the digital output signal

Switches the method of outputting audio

signals when you connect a component such

as an amplifier (receiver) or MD deck with a

digital input jack.

For connection details, see page 19.

Select “DOLBY DIGITAL,” “MPEG,” and

“DTS” after setting “DIGITAL OUT” to

“ON.”

If you connect a component that does not

conform to the selected audio signal, a loud

noise (or no sound) will come out from the

speakers, damaging your ears or speakers.

◆ DOLBY DIGITAL (DVD VIDEO/DVD-RW

only)

Selects the type of Dolby Digital signal.

◆ MPEG (DVD VIDEO/DVD-RW only)

Selects the type of MPEG audio signal.

◆ DTS (DVD VIDEO only)

Selects whether or not to output DTS signals.

DOLBY

SUR-

ROUND

Normally, select this position.

Multi-channel audio signals are

output to two channels for

enjoying surround sounds.

NORMAL Multi-channel audio signals are

downmixed to two channels for

use with your stereo.

Normally select this position. When

you select “ON,” see “Setting the

digital output signal” for further

settings.

OFF The influence of the digital circuit

upon the analog circuit is minimal.

AUDIO SETUP

AUDIO ATT:

AUDIO DRC:

DOLBY DIGITAL:

MPEG:

OFF

STANDARD

DOWNMIX:

DOLBY SURROUND

D-PCM

PCM

DTS:

OFF

DIGITAL OUT:

D-PCM Select this when the player is

connected to an audio

component without a built-in

Dolby Digital decoder. You can

select whether the signals

conform to Dolby Surround

(Pro Logic) or not by making

adjustments to the

“DOWNMIX” item in

“AUDIO SETUP” (page 66).

DOLBY

DIGITAL

Select this when the player is

connected to an audio

component with a built-in

Dolby Digital decoder.

PCM

Select this when the player is

connected to an audio

component without a built-in

MPEG decoder. If you play

MPEG audio sound tracks, the

player outputs stereo signals

via the DIGITAL OUT

(OPTICAL or COAXIAL)

jack.

MPEG Select this when the player is

connected to an audio

component with a built-in

MPEG decoder.

OFF

Select this when the player is

connected to an audio

component without a built-in

DTS decoder.

ON Select this when the player is

connected to an audio

component with a built-in DTS

decoder.

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dvp f250 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dvp f250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info