Bedienungsanleitung Sony dvp ls500 (Seite 68 von 76) (Englisch)

136620

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

The power is not turned on.

, Check that the mains lead is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 16)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, In the Setup Display, set “LINE” in

“SCREEN SETUP” to the appropriate item

that conforms to your system (page 62).

, The disc is dirty or flawed.

, If the picture output from your player goes

through your VCR to get to your TV or if

you are connected to a combination TV/

VIDEO player, the copy-protection signal

applied to some DVD programmes could

affect picture quality. If you still experience

problems even when you connect your

player directly to your TV, please try

connecting your player to your TV’s S

VIDEO input (page 16).

, You are playing a disc recorded in a colour

system that is different from your TV.

If you set “LINE” to “RGB” in SCREEN

SETUP (page 24, 64), the player does not

output component video signals from

COMPONENT VIDEO OUT jacks.

Even though you set the aspect ratio in “TV

TYPE” of “SCREEN SETUP,” the picture

does not fill the screen.

, The aspect ratio of the disc is fixed on your

DVD.

The picture is black and white.

, In the Setup Display, set “LINE” in

“SCREEN SETUP” to the appropriate item

that conforms to your TV (page 64).

, Depending on the TV, the picture on the

screen becomes black and white when you

play a disc recorded in the NTSC colour

system.

, If you are using a SCART (Euro AV) cord,

be sure to use one that is fully wired

(21-pins).

Sound

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the amplifier (receiver) (page 21,

22, 23).

, The amplifier (receiver) input is not

correctly set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (OPTICAL or

COAXIAL) jack, check the audio settings

(page 66).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will

come out when you select “2:STEREO,”

“2:1/L,” or “2:2/R.”

Sound is noisy.

, When playing a CD with DTS sound tracks,

noise will come from the LINE OUT L/R

(AUDIO) jacks or DIGITAL OUT

(OPTICAL or COAXIAL) jack (page 27).

Sound distortion occurs.

, Set “AUDIO ATT” in “AUDIO SETUP” to

“ON” (page 66).

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” to “TV MODE” (page 66).

, Set “AUDIO ATT” in “AUDIO SETUP” to

“OFF” (page 66).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dvp ls500 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dvp ls500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info