Bedienungsanleitung Sony dvp ns328 (Seite 32 von 40) (Englisch)

139357

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

The power is not turned on.

, Check that the mains lead is connected

securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cord securely.

, The connecting cords are damaged.

, Check the connection to your TV (page 10)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, Set “LINE” in “SCREEN SETUP” to an

item appropriate for your TV (page 28).

, The disc is dirty or flawed.

, The disc is recorded in a colour system that

is different from your TV.

The picture is black and white.

, Set “LINE” in “SCREEN SETUP” to an

item appropriate for your TV (page 28).

, Depending on the TV, the picture on the

screen becomes black and white when you

play a disc recorded in the NTSC colour

system.

, When you are using a SCART cord, be sure

to use one that is fully wired (21-pins).

Sound

There is no sound.

, Re-connect the connecting cord securely.

, The connecting cord is damaged.

, The player is connected to the wrong input

jack on the audio component (page 12).

, The audio component input is not correctly

set.

, The player is in pause mode or in Slow-

motion Play mode.

, The player is in fast forward or fast reverse

mode.

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL) jack,

check the audio settings (page 30).

, While playing a Super VCD on which the

audio track 2 is not recorded, no sound will

come out when you select “2:STEREO,”

“2:1/L,” or “2:2/R.” Press AUDIO to select

the recorded track.

, When playing multichannel MPEG audio

sound tracks, only the Front (L) and Front

(R) signals will be output from two front

speakers.

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” in “AUDIO SETUP” to

“TV MODE” (page 30).

Operation

The remote does not function.

, The batteries in the remote are weak.

, There are obstacles between the remote and

the player.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

The disc does not play.

, The disc is turned over.

Insert the disc with the playback side facing

down.

, The disc is skewed.

, The player cannot play certain discs

(page 3).

, The region code on the DVD does not match

the player.

, Moisture has condensed inside the player

(page 4).

, The player cannot play a recorded disc that

is not correctly finalized (page 35).

The album/track/file names are not

displayed correctly.

, The player can only display numbers and

alphabet. Other characters are displayed as

“

”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony dvp ns328 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony dvp ns328

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info