Bedienungsanleitung Sony DVP-NS9100ES (Seite 19 von 96) (Englisch)

60018

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Hookups

If you are connecting to a VCR

Connect your VCR to the LINE 2 jack on the player. The VCR can record the signal only from

your TV.

To connect to a TV with DVI input

Use an HDMI-DVI converter cord (not supplied). The DVI jack will not accept any audio

signals, so you have to use another audio connection in addition to this connection (page 20).

Furthermore, you cannot connect the HDMI OUT jack to DVI jacks that are not HDCP

compliant (e.g., DVI jacks on PC displays).

To change the aspect ratio for the connected TV

Depending on the disc and the TV type (standard 4:3 screen TV or wide screen TV), the image

may not fit the TV screen. If this happens, change the aspect ratio (page 76).

z Hint

If your TV has a CONTROL S jack, you can control the player by operating the remote toward

the TV. This feature is convenient when you placed the player and the TV away from each other.

After connecting the player with other components according to the above A, B, C, or D,

connect the TV via the CONTROL S IN/IR IN using a Control S cord (not supplied). Refer to

the instructions supplied with the TV to be connected.

Notes

• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a

clear image on the TV screen.

• Consumers should note that not all high definition television sets are fully compatible with this product and

may cause artifacts to be displayed in the picture. In case of 480 progressive scan picture problems, it is

recommended that the user switch the connection to the ‘standard definition’ output. If there are questions

regarding our TV set compatibility with this model 525p DVD player, please contact our customer service

centre.

• When connecting to a progressive TV, it is recommended that you use only pattern C. If you connect to

your TV using both C and E, a special control signal transmitted via the SCART (EURO AV) cable may

cause the signal to be switched to the SCART (EURO AV) jack.

• If you cannot view the pictures from a VCR through this player which is connected to a TV with RGB

component jacks, set to t (Audio/Video) on your TV. When you select (RGB), the TV

cannot receive the signal from the VCR.

• If you want to use your VCR’s SmartLink function, connect the VCR directly to your TV’s SCART (EURO

AV) jack and connect the player to the TV with another jack.

• The SmartLink function may not work properly if your VCR is connected to your TV via the SCART

(EURO AV) jacks on the player.

• When you connect the player to your TV via the SCART (EURO AV) jacks, the TV’s input source is set

to the player automatically when you start playback or press any button except for \/1. In this case, press

TV/DVD on the remote to return the input to the TV.

• If you are connecting to an HDMI jack, use a Sony HDMI cord (not supplied).

When you play a disc recorded in the NTSC colour system, the player outputs the video

signal or the Setup Display etc. in the NTSC colour system and the picture may not appear

on the PAL colour system televisions. In this case, open the tray and remove the disc.

VCR

CD/DVD player

Connect

directly

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVP-NS9100ES Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVP-NS9100ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info