Bedienungsanleitung Sony DVP-NS9100ES (Seite 31 von 96) (Englisch)

60018

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Hookups

Establishing a LINC

Before an audio signal can be transmitted

between i.LINK components, a LINC

(Logical Interface Connection) must first be

established between the receiving component

(of the audio signal) and the sending

component.

Establishing a LINC means establishing a

logical path for the transmission of digital

audio signals between the two components.

Each logical path has an ID number. Since the

component that sends an audio signal must

output the signal to a path, and the component

that receives the signal must input it from the

same path, the path must be mutually known

by both components. During the

establishment of a LINC, the following

communication occurs between the two

i.LINK components.

Example

1 TA-DA9000ES/STR-DA7100ES

establishes a LINC with DVP-NS9100ES.

TA-DA9000ES/STR-DA7100ES sends a

request and path information to DVP-

NS9100ES to establish a transmission path

for the audio signal.

2 DVP-NS9100ES responds to TA-

DA9000ES/STR-DA7100ES, agreeing to the

establishment of a LINC. The digital audio

signal transmission becomes possible only

after the communication described above has

occurred and a LINC has been established.

Listening in high fidelity

H.A.T.S. function

When the H.A.T.S. function of TA-

DA9000ES/STR-DA7100ES is “ON,” digital

audio signals are momentarily stored in a

buffer, then read with exact timing before

being converted to analog. This eliminates

the jitter (timing lapses) that sometimes occur

during digital signal transmission and greatly

improves sound quality.

When this function is turned on, “H.A.T.S.”

lights up in the display of TA-DA9000ES/

STR-DA7100ES whenever the digital audio

signal is input to the receiver. When not using

this function, set it to “OFF” on TA-

DA9000ES/STR-DA7100ES. For details,

refer to the Operating Instructions supplied

with TA-DA9000ES/STR-DA7100ES.

Notes

• Because of the way the H.A.T.S. function

operates, a slight time lag is introduced between

each operation (e.g., pressing play, stop, or pause)

and its implementation. The duration of this time

lag may be different for CD and Super Audio CD

sources.

• The H.A.T.S. function works only with H.A.T.S.

compatible components.

• The H.A.T.S. function is available only for music

CDs and Super Audio CDs.

i.LINK components complying with

copy protection technology. One such

technology is the DTLA (The Digital

Transmission Licensing Administrator)

recognized by the Copy Protection Technical

Working Group. It may not be possible to

make digital copies of copy restricted digital

data (video/audio/data) using i.LINK signals

between components that comply with the

DTLA copy protection technology. In

addition, it may not be possible to transfer

digital data (video/audio/data) via i.LINK

between i.LINK components which comply

with DTLA copy protection and i.LINK

components which do not.

i.LINK is a designation referring to IEEE 1394-

1995 and IEEE 1394a-2000. i.LINK and the i.LINK

logo “ ” are trademarks of Sony Corporation.

TA-DA9000ES

STR-DA7100ES

DVP-NS9100ES

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVP-NS9100ES Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVP-NS9100ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info