Bedienungsanleitung Sony DVP-NS9100ES (Seite 77 von 96) (Englisch)

60018

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Settings and Adjustments

◆ BLACK LEVEL

Selects the black level (setup level) for the

video (NTSC) signals output from the jacks

other than COMPONENT VIDEO OUT/

HDMI OUT jacks.

◆

BLACK LEVEL (COMPONENT OUT)

Selects the black level (setup level) for the

video (NTSC) signals output from the

COMPONENT VIDEO OUT jacks. You

cannot select this when the player outputs

progressive signals (page 77).

◆ COMPONENT OUT

Selects the type of signal output from the

COMPONENT VIDEO OUT jacks. See page

89 for more information about the two

different signal types.

When the setting is changed, the confirmation

display appears. If you do not select “Yes” or

“No” within about 10 seconds, the setting is

canceled and the display returns to the Setup

Display.

To force the system to switch to interlace

when “PROGRESSIVE” is selected

Hold down x on the player and press PLAY

on the player.

◆ 4:3 OUTPUT

This setting is effective only when you set

“TV TYPE” in “SCREEN SETUP” to

“16:9.” If you can change the aspect ratio on

your progressive format (480p) compatible

TV, change the setting on your TV, not the

player.

Note that this setting is effective only for

HDMI connection, or progressive signals

output from the COMPONENT VIDEO OUT

jacks.

◆ LINE

Selects video signals output from the LINE

(RGB)-TV jack on the rear panel of the

player.

• If your TV does not accept S video or the RGB

signals, no picture will appear on the TV screen,

even if you select “S VIDEO” or “RGB.” Refer to

the instructions supplied with your TV.

• If your TV has only one SCART (EURO AV)

jack, do not select “S VIDEO.”

• When you select “RGB,” you cannot use the

COMPONENT VIDEO OUT jacks.

JACKET

PICTURE

The jacket picture (still picture)

appears, but only when the

jacket picture is already

recorded on the disc (DVD,

etc.). If the disc does not

contain a jacket picture, the

“GRAPHICS” picture appears.

GRAPHICS

A preset picture stored in the

player appears.

BLUE The background colour is blue.

BLACK The background colour is black.

OFF

Lowers the standard black

level. Use this when the picture

becomes too white.

ON Sets the black level of the

output signal to the standard

level.

OFF

Sets the black level of the

output signal to the standard

level. Normally select this

position.

ON Raises the standard black level.

Use this setting when the

picture appears too dark.

INTERLACE

Select this when the

player is connected to a

standard (interlace

format) TV.

PROGRESSIVE Select this when you have

a TV that can accept

progressive signals.

FULL Select this when you can change

the aspect ratio on your TV.

NORMAL Select this when you cannot

change the aspect ratio on your

TV. Shows a 16:9 aspect ratio

signal with black bands on left

and right sides of the image.

VIDEO

Outputs video signals.

S VIDEO Outputs S video signals.

RGB Outputs RGB signals.

16:9 aspect ratio TV

c continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony DVP-NS9100ES Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony DVP-NS9100ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info